INTEGRATED SiGe AND Si DEVICE CAPABILITIES AND TRENDS FOR MULTI-GIGAHERTZ APPLICATIONS

2003 ◽  
Vol 13 (01) ◽  
pp. 175-219 ◽  
Author(s):  
G. G. FREEMAN ◽  
B. JAGANNATHAN ◽  
N. ZAMDMER ◽  
R. GROVES ◽  
R. SINGH ◽  
...  

Silicon-based devices, including the increasingly available SiGe-based devices, are now demonstrating fT and fMAX values over 200 GHz. These recent advances open the door to a wide range of silicon-based very high frequency, low power and highly integrated solutions. Trends in silicon MOS, SiGe HBT, SiGe MODFET and SiGe strained silicon FETs are reported. Silicon inroads to device functions viewed as the sole realm of III-V technologies are also being demonstrated. Capability and trends of the integrated silicon photodiode are reported here as an example. Integration of these high-speed devices into a complex circuit requires on-chip passive device functionality at such high frequency. Key devices to enable integration are the inductor, varactor, and transmission line, and operation of these devices at high frequency is reported. Further, we discuss noise isolation issues and techniques, which may be used when minimizing cross-talk within a conductive silicon substrate.

2005 ◽  
Vol 8 (2) ◽  
pp. 17-35 ◽  
Author(s):  
Andrés López-Pita ◽  
Francesc Robusté

Author(s):  
R. L. Tutwiler ◽  
J. P. Stitt ◽  
K. K. Shung ◽  
Q. Wu ◽  
T. A. Ritter ◽  
...  

The purpose of this system is to have the capability to characterize the performance of very high frequency transducers and arrays. The analog front end is computer controlled by a set of de-multiplexers and multiplexers. The output of the multiplexer network is connected to a TGC array, which is interfaced to a high-speed data acquisition system. A software GUI (Graphical User Interface) has been designed to accomplish this task [1]. A programmable digital I/O interface allows collection of RF channel data and has the capability to be interfaced to a very high frequency analog beam-former under construction. The system front-end electronics (pulsers, receivers, T/R switches, multiplexers, and demultiplexers) have been characterized [2, 3]. The digital I/O signal interface has been integrated and tested. The hardware front end has been integrated to the array interface distribution panel. The individual transducer elements impulse responses have been evaluated and the performance of the array has been tested with a wire test phantom to characterize lateral and axial resolution.


2020 ◽  
Vol 30 (11) ◽  
pp. 1909501 ◽  
Author(s):  
Akifumi Yamamura ◽  
Takaaki Sakon ◽  
Kayo Takahira ◽  
Takahiro Wakimoto ◽  
Mari Sasaki ◽  
...  

2007 ◽  
Vol 17 (10) ◽  
pp. 3715-3719 ◽  
Author(s):  
MANTAS MEŠKAUSKAS ◽  
ARŪNAS TAMAŠEVIČIUS ◽  
KȨSTUTIS PYRAGAS

Frequency-domain analysis of the recently suggested analogue signal predictor is performed. In addition, the operation of the circuit is demonstrated in the high frequency and very high frequency ranges by means of PSPICE simulator employing high-speed operational amplifiers.


1977 ◽  
Author(s):  
D. V. Campbell ◽  
William Kennebeck ◽  
A. Zanella ◽  
Paul Sexton

Sign in / Sign up

Export Citation Format

Share Document