Effect of obstacle height on the nanofluid convection patterns inside a hollow square enclosure

2021 ◽  
pp. 2250026
Author(s):  
Rasul Mohebbi ◽  
Mohsen Babamir ◽  
Mohammad Mahdi Amooei ◽  
Yuan Ma
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Volume Fraction ◽  
Critical Rayleigh Number ◽  
Hybrid Nanofluid ◽  
Thermal Plume ◽  
Square Enclosure ◽  
Secondary Vortices ◽  
Obstacle Height

This paper contains natural convection of Ag–MgO/water micropolar hybrid nanofluid in a hollow hot square enclosure equipped by four cold obstacles on the walls. The simulations were performed by the lattice Boltzmann method (LBM). The influences of Rayleigh number and volume fraction of nanoparticle on the fluid flow and heat transfer performance were studied. Moreover, the effects of some geometric parameters, such as cold obstacle height and aspect ratio, were also considered in this study. The results showed that when the aspect ratio is not large ([Formula: see text] or 0.4), at low Rayleigh number (103), the two secondary vortices are established in each main vortex and this kind of secondary vortex does not form at high Rayleigh number (106). However, at [Formula: see text], these secondary vortices occur again in the middle two vortices at [Formula: see text], which is similar to that at [Formula: see text]. At [Formula: see text], the critical Rayleigh number, when the dominated mechanism of heat transfer changes from conduction to convection, is 104. However, the critical Rayleigh number becomes 105 at [Formula: see text] or 0.6. When the cold obstacle height increases, the shape of the vortices inside the enclosure changes due to the different spaces. Besides, at [Formula: see text], for different cold obstacle heights, the location of the thermal plume is different, owing to the different shapes of vortices. Accordingly, the average Nusselt number increases by increment of the Rayleigh number, nanoparticle volume fraction, cold obstacle height and aspect ratio.

Natural Convective Flow in a Three Enclosure System Involving Two High Aspect Ratio Side Enclosures Joined to a Large Square Enclosure With Interfacial Heat Generation

2003 ◽  
Author(s):  
Patrick H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat Generation ◽  
High Aspect Ratio ◽  
Convective Flow ◽  
Square Enclosure ◽  
Number Variation ◽  
Resistance To Heat

A numerical study of free convective flow in a vertical joined three enclosure arrangement has been undertaken. In this arrangement, a vertical heated wall kept at a uniform high temperature is contained in a high aspect ratio rectangular side enclosure. This enclosure is joined to a second high aspect ratio rectangular side enclosure which has the same height as the first side enclosure, the two enclosures being separated by a vertical impermeable dividing wall which offers no resistance to heat transfer. The second side enclosure is joined to a larger square enclosure, the vertical dividing wall between these two enclosures also being impermeable and offering no resistance to heat transfer. The vertical wall of the square main flow enclosure opposite to the dividing wall is maintained at a uniform lower temperature. There is a uniform rate of heat generation in the dividing wall between the inner side enclosure and the main enclosure. The situation considered is an approximate model of a double-paned window exposed to a hot outside environment and covered by a plane blind which in turn is exposed to cooled room. In some such cases there can be significant heat generation in the blind due to the absorbtion of solar energy, this being modeled by the heat generation in the one dividing wall. The flow has been assumed to be laminar and two-dimensional and results have been obtained for a Prandtl number of 0.7. The effects of Rayleigh number, dimensionless width of the side enclosures and dimensionless heat generation rate in the blind on the Nusselt number have been investigated. The results show that for a fixed Rayleigh number and for a given dimensionless first (i.e., outer) side enclosure width, there is a minimum in the Nusselt number variation with the dimensionless width of the second side enclosure. An approximate solution for the Nusselt number variation with the dimensionless width of the second side enclosure for small values of this dimensionless width has also been derived.

Numerical computation of natural convection inside a curved-shape nanofluid-filled enclosure with nonuniform heating of the bottom wall

2019 ◽  
Vol 30 (01) ◽  
pp. 1950006 ◽  
Author(s):  
Abdellaziz Yahiaoui ◽  
Mahfoud Djezzar ◽  
Hassane Naji
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Bottom Wall ◽  
Working Fluid ◽  
Nonuniform Heating ◽  
Square Enclosure ◽  
Nusselt Numbers

This paper performs a numerical analysis of the natural convection within two-dimensional enclosures (square enclosure and enclosures with curved walls) full of a H2O-Cu nanofluid. While their vertical walls are isothermal with a cold temperature [Formula: see text], the horizontal top wall is adiabatic and the bottom wall is kept at a sinusoidal hot temperature. The working fluid is assumed to be Newtonian and incompressible. Three values of the Rayleigh number were considered, viz., 103, 104, 105, the Prandtl number is fixed at 6.2, and the volume fraction [Formula: see text] is taken equal to 0% (pure water), 10% and 20%. The numerical simulation is achieved using a 2D-in-house CFD code based on the governing equations formulated in bipolar coordinates and translated algebraically via the finite volume method. Numerical results are presented in terms of streamlines, isotherms and local and average Nusselt numbers. These show that the heat transfer rate increases with both the volume fraction and the Rayleigh number, and that the average number of Nusselt characterizing the heat transfer raises with the nanoparticles volume fraction.

Investigation of magnetohydrodynamics in Ag-TiO2/water hybrid nanofluid in a Shamse knot shaped cavity

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuan Ma ◽  
Mohammad Mehdi Rashidi ◽  
Rasul Mohebbi ◽  
Zhigang Yang
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Side Length ◽  
Hybrid Nanofluid ◽  
Nanoparticle Volume Fraction ◽  
Heat Transfer Characteristics ◽  
Content Type

Purpose The nanofluid natural convection heat transfer in a hollow complex enclosure, which is named as Shamse knot shape, is studied numerically. This paper aims to present how the Rayleigh number, nanoparticle volume fraction, Hartmann number and hollow side length affect the fluid flow and heat transfer characteristics. Design/methodology/approach The continuity, momentum and energy equations have been solved using lattice Boltzmann method (LBM). Numerical simulation has been obtained for a wide range of Rayleigh number (103 ≤ Ra ≤ 106), nanoparticle volume fraction (0 ≤ ϕ 0.05) and Hartmann number (0 ≤ Ha ≤ 60) to analyze the fluid flow pattern and heat transfer characteristics. Moreover, the effect of hollow side length (D) on flow field and thermal performance is studied. Findings The results showed that the magnetic field has a negative effect on the thermal performance and the average Nusselt number decreases by increasing the Hartmann number. Because of the high conduction heat transfer coefficient of nanoparticles, the average Nusselt number increases by rising the nanoparticle volume fraction. The effect of adding nanoparticles on heat transfer is more effective at low nanoparticle volume fraction (0 ≤ ϕ ≤ 0.01). It was also found that at Ra = 106, when the hollow side length increases to 3, the flow pattern becomes different due to the small gap. The averaged Nu is an increasing function of D at low Ra and an opposite trend occurs at high Rayleigh number. Originality/value For the first time, the effects of magnetic field, Rayleigh number, nanoparticle volume fraction and hollow side length on natural convection heat transfer of hybrid nanofluid (Ag-TiO2/water) is investigated in a complicated cavity.

scholarly journals Heat transfer augmentation of magnetohydrodynamics natural convection in L-shaped cavities utilizing nanofluids

2012 ◽  
Vol 16 (2) ◽  
pp. 489-501 ◽  
Author(s):  
Ehsan Sourtiji ◽  
Seyed Hosseinizadeh
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Flow Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
The Magnetic Field

A numerical study of natural convection heat transfer through an alumina-water nanofluid inside L-shaped cavities in the presence of an external magnetic field is performed. The study has been carried out for a wide range of important parame?ters such as Rayleigh number, Hartmann number, aspect ratio of the cavity and solid volume fraction of the nanofluid. The influence of the nanoparticle, buoyancy force and the magnetic field on the flow and temperature fields have been plotted and discussed. The results show that after a critical Rayleigh number depending on the aspect ratio, the heat transfer in the cavity rises abruptly due to some significant changes in flow field. It is also found that the heat transfer enhances in the presence of the nanoparticles and increases with solid volume fraction of the nanofluid. In addition, the performance of the nanofluid utilization is more effective at high Ray?leigh numbers. The influence of the magnetic field has been also studied and de?duced that it has a remarkable effect on the heat transfer and flow field in the cavity that as the Hartmann number increases the overall Nusselt number is significantly decreased specially at high Rayleigh numbers.

Natural Convection in a Nano-Fluid Filled Square Enclosure

2020 ◽  
Vol 847 ◽  
pp. 114-119
Author(s):  
Barbie Leena Barhoi ◽  
Ramesh Chandra Borah ◽  
Sandeep Singh
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Control Volume ◽  
Convection Heat Transfer ◽  
Ansys Fluent ◽  
Square Enclosure ◽  
Nano Fluid

The present study relates to numerical investigation of natural convection heat transfer in a nanofluid filled square enclosure. One side of the enclosure is maintained at high temperature and the other side at a low temperature; while the top and bottom sides are adiabatic. The commercial CFD software ANSYS-FLUENT© was used to solve this numerical problem with the governing differential equations discretized by a control volume approach. nanofluids of Cu-water, Al2O3-water and TiO2-water have been simulated for a range of Rayleigh numbers and volume fractions. The results were obtained in the form of streamlines and isotherms. Interpretations of the results are done based on heat transfer rates, volume fraction, Rayleigh number and Nusselt number. It is to be noted that addition of nanoparticles enhances the heat transfer rate. It is also observed that the Nusselt number is highly affected by volume fraction and Rayleigh number.

scholarly journals Effect of Al2O3/water nanofluid on Conjugate Free Convection in a Baffle Attached Square Enclosure

Mechanika ◽  
2020 ◽  
Vol 26 (2) ◽  
pp. 126-133
Author(s):  
Thansekhar M.Rathinam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Rayleigh Number ◽  
Free Convection ◽  
Conjugate Heat Transfer ◽  
Volume Fraction ◽  
Numerical Study ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Square Enclosure

A numerical study of conjugate free convection heat transfer of Al2O3/water nanofluid inside a differentially heated square enclosure with a baffle attached to its hot wall has been carried out. A detailed parametric study has been carried out to analyze the effect of Rayleigh number (104 < Ra < 106), length, thickness and position of baffle, conductivity ratio and volume fraction of the nanoparticle (0<<0.2) on heat transfer. The thermal conductivity ratio of the baffle plays a major role on the conjugate heat transfer inside the enclosure. Higher the baffle length better is the effectiveness of the baffle. The average Nusselt number is found to be an increasing function of both thermal conductivity ratio and volume fraction of the nanofluid. The minimum enhancement of conjugate heat transfer is 30% when Al2O3/water nanofluid of 0.1 volume fraction is used for the entire range of Rayleigh number considered.

Lattice Boltzmann Simulation of Magnetic Field Effect on Natural Convection of Power-Law Nanofluids in Rectangular Enclosures

2017 ◽  
Vol 9 (5) ◽  
pp. 1094-1110
Author(s):  
Lei Wang ◽  
Zhenhua Chai ◽  
Baochang Shi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Power Law ◽  
Lattice Boltzmann ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Power Law Index

AbstractIn this paper, the magnetic field effects on natural convection of power-law nanofluids in rectangular enclosures are investigated numerically with the lattice Boltzmann method. The fluid in the cavity is a water-based nanofluid containing Cu nanoparticles and the investigations are carried out for different governing parameters including Hartmann number (0.0≤Ha≤20.0), Rayleigh number (104≤Ra≤106), power-law index (0.5≤n≤1.0), nanopartical volume fraction (0.0≤ϕ≤0.1) and aspect ratio (0.125≤AR≤8.0). The results reveal that the flow oscillations can be suppressed effectively by imposing an external magnetic field and the augmentation of Hartmann number and power-law index generally decreases the heat transfer rate. Additionally, it is observed that the average Nusselt number is increased with the increase of Rayleigh number and nanoparticle volume fraction. Moreover, the present results also indicate that there is a critical value for aspect ratio at which the impact on heat transfer is the most pronounced.

Instability of Nanofluids in Natural Convection

2008 ◽  
Vol 130 (7) ◽  
Author(s):  
D. Y. Tzou
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Critical Rayleigh Number ◽  
Remarkable Change ◽  
Closed Form Solutions ◽  
Weighted Residuals ◽  
Method Of Weighted Residuals

Abstract Instability of natural convection in nanofluids is investigated in this work. As a result of Brownian motion and thermophoresis of nanoparticles, the critical Rayleigh number is shown to be much lower, by one to two orders of magnitude, as compared to that for regular fluids. The highly promoted turbulence, in the presence of nanoparticles for as little as 1% in volume fraction, significantly enhances heat transfer in nanofluids, which may be much more pronounced than the enhancement of the effective thermal conductivity alone. Seven dominating groups are extracted from the nondimensional analysis. By extending the method of eigenfunction expansions in conjunction with the method of weighted residuals, closed-form solutions are derived for the Rayleigh number to justify such remarkable change by the nanoparticles at the onset of instability.

scholarly journals Numerical analysis of natural convection in a prismatic enclosure

2011 ◽  
Vol 15 (2) ◽  
pp. 437-446 ◽  
Author(s):  
Walid Aich ◽  
Imen Hajri ◽  
Ahmed Omri
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Flow Structure ◽  
Control Volume ◽  
Critical Rayleigh Number ◽  
Pitchfork Bifurcation ◽  
Heated Wall ◽  
Uniform Heat Flux

Natural convection heat transfer and fluid flow have been examined numerically using the control-volume finite-element method in an isosceles prismatic cavity, submitted to a uniform heat flux from below when inclined sides are maintained isothermal and vertical walls are assumed to be perfect thermal insulators, without symmetry assumptions for the flow structure. The aim of the study is to examine a pitchfork bifurcation occurrence. Governing parameters on heat transfer and flow fields are the Rayleigh number and the aspect ratio of the enclosure. It has been found that the heated wall is not isothermal and the flow structure is sensitive to the aspect ratio. It is also found that heat transfer increases with increasing of Rayleigh number and decreases with increasing aspect ratio. The effects of aspect ratio become significant especially for higher values of Rayleigh number. Eventually the obtained results show that a pitchfork bifurcation occurs at a critical Rayleigh number, above which the symmetric solutions becomes unstable and asymmetric solutions are instead obtained.

scholarly journals Numerical Analysis of Natural Convection Heat Transfer Inside an Inverted T-Shaped Cavity Filled with Nanofluid

2021 ◽  
pp. 180-188
Author(s):  
Gopal Sen ◽  
Mohammad Ilias Inam
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Heated Wall ◽  
Natural Convection Heat Transfer ◽  
Average Heat Transfer Coefficient ◽  
Rayleigh Numbers

This assessment is centered on the characteristics of natural convection heat transfer of Aluminium Oxide-Air nanofluid inside an inverted T-shaped enclosure with differentially heated sidewalls. The left edges of the enclosed cavity have been treated as a heated wall and are kept at a constant temperature. The right edges are also maintained at a constant temperature but lower than the heated wall. The top and bottom faces of the cavity have been considered adiabatic. The evaluation has been numerically investigated using ANSYS fluent. The effect of different significant parameters like volume fraction of nanoparticles, the shape of the enclosure, and Rayleigh number on the heat transfer characteristics inside an inverted T shape enclosure have been investigated. In this numerical analysis, a series of DNS simulations have been conducted for different Rayleigh numbers in the range of 103 to 106, the volume fraction of particles in the range 0≤ φ ≤0.1, and for the different aspect ratios for the inverted T shape have been conducted. The outcomes of this CFD analysis indicate a remarkable rise in the average heat transfer coefficient with the rising volume fraction of Al2O3 particles in the air. An increase of the average Nusselt number was also observed with the increase of Rayleigh number, but it drops slightly at a higher volume fraction of nanoparticles due to an increase in conductive heat transfer. For Rayleigh numbers ≥ 104, both the average Nusselt number and average heat transfer coefficient decrease up to a certain shape of the cavity aspect ratio. After that cavity aspect ratio, both the parameters value increase. But in the case of Rayleigh number = 103, both of the values decrease with the increase in the cavity aspect ratio.

Sign in / Sign up

Export Citation Format

Share Document