ANISOTROPIC GOLD NANOCRYSTALS: SYNTHESIS AND CHARACTERIZATION

2010 ◽  
Vol 24 (06n07) ◽  
pp. 757-761 ◽  
Author(s):  
R. STIUFIUC ◽  
F. TODERAS ◽  
M. IOSIN ◽  
G. STIUFIUC
Keyword(s):  
Growth Direction ◽  
Preferential Growth ◽  
Gold Nanocrystals ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Preferential Growth Direction ◽  
Phase Images ◽  
Means Of Transmission

In this letter we report on successful preparation and characterization of anisotropic gold nanocrystals bio-synthesized by reduction of aqueous chloroaurate ions in pelargonium plant extract. The nanocrystals have been characterized by means of Transmission Electron Microscopy (TEM), UV-VIS absorption spectroscopy and tapping mode atomic force microscopy (TM-AFM). Using these investigation techniques, the successful formation of anisotropic single nanocrystals with the preferential growth direction along the gold (111) plane has been confirmed. The high detail phase images could give us an explanation concerning the growth mechanism of the nanocrystals.

Structural and Morphological Characterization of Ultrathin Films of an Asymmetric Polydiacetylene

1996 ◽  
Vol 440 ◽  
Author(s):  
H. C. Wang ◽  
D. W. Cheong ◽  
J. Kumar ◽  
C. Sung ◽  
S. K. Tripathy
Keyword(s):  
Second Harmonic ◽  
Morphological Characterization ◽  
Lb Films ◽  
Force Microscopy ◽  
Langmuir Blodgett ◽  
Glass Substrates ◽  
Atomic Force ◽  
Transmission Electron ◽  
Air Water Interface

AbstractA soluble, asymmetrically substituted polydiacetylene, poly(BPOD), has been reported to form stable monolayers at the air-water interface by the Langmuir-Blodgett (LB) technique [2]. Preformed polydiacetylene has been deposited onto hydrophobic substrates as multilayers to form second order nonlinear optical thin films. Second harmonic generation was found to increase with the number of layers. From previous atomic force microscopy (AFM) studies backbone orientation along the dipping direction with an interchain spacing of about 5 A° was indicated [2].The film morphology and preferential molecular orientation of these LB films are further investigated by transmission electron microscopy (TEM). A specifically tailored sample preparation method for the ultrathin LB films was used. Multilayer films were deposited on hydrophobic collodion covered glass substrates for this purpose. Electron diffraction was employed to study the crystalline organization of mono and multilayers of LB films as well as cast films.

scholarly journals Detection Limits of DLS and UV-Vis Spectroscopy in Characterization of Polydisperse Nanoparticles Colloids

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Emilia Tomaszewska ◽  
Katarzyna Soliwoda ◽  
Kinga Kadziola ◽  
Beata Tkacz-Szczesna ◽  
Grzegorz Celichowski ◽  
...  
Keyword(s):  
Light Scattering ◽  
Dynamic Light Scattering ◽  
Point Of View ◽  
Spectroscopy Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
The One

Dynamic light scattering is a method that depends on the interaction of light with particles. This method can be used for measurements of narrow particle size distributions especially in the range of 2–500 nm. Sample polydispersity can distort the results, and we could not see the real populations of particles because big particles presented in the sample can screen smaller ones. Although the theory and mathematical basics of DLS technique are already well known, little has been done to determine its limits experimentally. The size and size distribution of artificially prepared polydisperse silver nanoparticles (NPs) colloids were studied using dynamic light scattering (DLS) and ultraviolet-visible (UV-Vis) spectroscopy. Polydisperse colloids were prepared based on the mixture of chemically synthesized monodisperse colloids well characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM), DLS, and UV-Vis spectroscopy. Analysis of the DLS results obtained for polydisperse colloids reveals that several percent of the volume content of bigger NPs could screen completely the presence of smaller ones. The presented results could be extremely important from nanoparticles metrology point of view and should help to understand experimental data especially for the one who works with DLS and/or UV-Vis only.

Surface and Interface Characterization of Ion Beam Re-crystallized Si

2002 ◽  
Vol 750 ◽  
Author(s):  
P. K. Sahoo ◽  
B. Satpati ◽  
S. Dey ◽  
P. V. Satyam ◽  
T. Som ◽  
...  
Keyword(s):  
Ion Beam ◽  
Amorphous Layer ◽  
Amorphous Structure ◽  
Average Height ◽  
Force Microscopy ◽  
Surface And Interface ◽  
Atomic Force ◽  
Nano Crystalline ◽  
Transmission Electron

ABSTRACTIn the present work we have studied efficacy of ion beam induced epitaxial crystallization (IBIEC) to recover amorphous layers (300 – 350 nm) produced by MeV Kr ions in Si(100) and studied the associated changes occurring on surface and interface of the recrystallized region. IBIEC experiments were carried out at sample temperatures in the range of 200 − 400°C using 1 MeV N+ ion beam. Rutherford backscattering-Channeling technique showed planar and gradual recovery of the amorphous layer as a function of temperature. Transmission electron microscopy measurements show good crystalline structure of the recovered region at 400°C while at lower temperatures nano-crystalline Si formation embedded in the amorphous structure is evident. The surface topography studied by atomic force microscopy shows development of islands after IBIEC. The rms roughness is around 0.5 nm and average height of the islands is found to be 1.8 nm. The observed epitaxial growth and the surface topographical features have been correlated.

Epitaxial Growth and Characterization of the Ordered Vacancy Compound CuIn3Se5 on GaAs (100) Fabricated by Molecular Beam Epitaxy

1994 ◽  
Vol 340 ◽  
Author(s):  
Art J. Nelson ◽  
M. Bode ◽  
G. Horner ◽  
K. Sinha ◽  
John Moreland
Keyword(s):  
Molecular Beam Epitaxy ◽  
Epitaxial Growth ◽  
Molecular Beam ◽  
Structural Defects ◽  
X Ray Diffraction ◽  
Symmetric Vibration ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

ABSTRACTEpitaxial growth of the ordered vacancy compound (OVC) CuIn3Se5 has been achieved on GaAs (100) by molecular beam epitaxy (MBE) from Cu2Se and In2Se3 sources. Electron probe microanalysis and X-ray diffraction have confirmed the composition for the 1-3-5 OVC phase and that the film is single crystal Culn3Se5 (100). Transmission electron microscopy (TEM) characterization of the material also showed it to be single crystalline. Structural defects in the layer consisted mainly of stacking faults. Photoluminescence (PL) measurements performed at 7.5 K indicate that the bandgap is 1.28 eV. Raman spectra reveal a strong polarized peak at 152 cm−1, which is believed to arise from the totally symmetric vibration of the Se atoms in the lattice. Atomic force microscopy reveals faceting in a preferred (100) orientation.

scholarly journals The disease associated Tau35 fragment has an increased propensity to aggregate compared to full-length tau

2021 ◽  
Author(s):  
Chen Lyu ◽  
Stefano Da Vela ◽  
Youssra K Al-Hilaly ◽  
Karen Marshall ◽  
Richard Thorogate ◽  
...  
Keyword(s):  
Progressive Increase ◽  
Full Length ◽  
Motor Dysfunction ◽  
Truncated Form ◽  
X Ray ◽  
Force Microscopy ◽  
X Ray Scattering ◽  
Atomic Force ◽  
Transmission Electron

Tau35 is a truncated form of tau found in human brain in a subset of tauopathies. Tau35 expression in mice recapitulates key features of human disease, including progressive increase in tau phosphorylation, along with cognitive and motor dysfunction. The appearance of aggregated tau suggests that Tau35 may have structural properties distinct from those of other tau species that could account for its pathological role in disease. To address this hypothesis, we performed a structural characterization of monomeric and aggregated Tau35 and compared the results to those of two longer isoforms, 2N3R and 2N4R tau. We used small angle X-ray scattering to show that Tau35, 2N3R and 2N4R tau all behave as disordered monomeric species but Tau35 exhibits higher rigidity. In the presence of the poly-anion heparin, Tau35 increases thioflavin T fluorescence significantly faster and to a greater extent than full-length tau, demonstrating a higher propensity to aggregate. We used atomic force microscopy, transmission electron microscopy and X-ray fiber diffraction to demonstrate that Tau35 aggregates are morphologically similar to previously reported tau fibrils but they are more densely packed. These data increase our understanding of the aggregation inducing properties of clinically relevant tau fragments and their potentially damaging role in the pathogenesis of human tauopathies.

scholarly journals Characterization of the Spindle Morphology Nanomicelles Assembled from Sericin and Gelatin

2017 ◽  
Vol 2017 ◽  
pp. 1-9
Author(s):  
Xiaozhou Su ◽  
Lei Li ◽  
Weihan Huang
Keyword(s):  
Electron Microscopy ◽  
Protein Concentration ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Ft Ir ◽  
And Storage ◽  
Ft Ir Spectroscopy

Complex nanomicelles were prepared by sericin and type A gelatin with molecular weight of 5789 Da and 128664 Da separately. The assembling conditions were as follows: mass ratio (sericin/gelatin) was 1 : 1, protein concentration was 0.5%, temperature was 35°C, and assembling time was 18 hours. Scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and dynamic light scattering (DLS) were conducted to observe and characterize the complex nanomicelles. Results showed that the complex sericin/gelatin micelles was a kind of nanospindle micelles. The micelles had high electrochemical stability, thermal stability, antidilution stability, and storage stability.

Structural Characterization of Nc-Si/A-Sio2 Superlattices Subjected To Thermal Treatment

1998 ◽  
Vol 536 ◽  
Author(s):  
G. F. Grom ◽  
L. Tsybeskov ◽  
K. D. Hirschman ◽  
P. M. Fauchet ◽  
J. P. McCaffrey ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Raman Spectroscopy ◽  
Defect Density ◽  
High Temperature Annealing ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Si Nanocrystals

AbstractThe morphology of nanocrystalline (nc)-Si/amorphous (a)-SiO2 superlattices (SLs) is studied using Raman spectroscopy in the acoustic and optical phonon ranges, transmission electron microscopy (TEM), and atomic force microscopy (AFM). It is demonstrated that high temperature annealing (up to 1100°C) and oxidation in O2/H2O ambient do not destroy the SL structure, which retains its original periodicity and nc-Si/a-SiO2 interface abruptness. It is found that oxidation at high temperatures reduces the defect density in nc-Si/a-SiO2 SLs and induces the lateral coalescence of Si nanocrystals (NCs). The size, shape, packing density, and crystallographic orientation of the Si nanocrystals are studied as a function of the oxidation time.

2D Assembly of Palladium Nanoparticles and AFM Characterization

2014 ◽  
Vol 887-888 ◽  
pp. 161-166
Author(s):  
Xiao Jun Liu ◽  
Li Yun Song ◽  
Zong Cheng Zhan ◽  
Hong He ◽  
Xue Hong Zi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silicon Wafer ◽  
Palladium Nanoparticles ◽  
Cetyltrimethylammonium Bromide ◽  
Dip Coating ◽  
Two Dimensional ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

The two-dimensional (2D) assembly of the palladium nanoparticles (Pd NPs) was studied in this work. The cubic Pd NPs were successfully synthesized and assembled on mica and silicon wafer in the dip-coating way. The morphology of the Pd NPs and the topography of the Pd NPs assembly on the substrates were characterized with transmission electron microscopy (TEM) and atomic force microscopy (AFM). In the process of the fabrication, the excess cetyltrimethylammonium bromide (CTAB) was removed with the deposition-redispersion strategy, the UV-vis spectra and zeta-potential of the Pd NPs colloid were measured. It was found that the assembly and AFM characterization of the Pd NPs were affected negatively by the presence of excess CTAB. The hydrophilic property of the substrate is the crucial factor to control the 2D assembly of the Pd NPs. Compared with the washed silicon wafer, mica is ultra-hydrophilic and can attract more Pd NPs.

Sign in / Sign up

Export Citation Format

Share Document