FIRST-PRINCIPLES STUDY OF STRUCTURAL AND ELECTRONIC PROPERTIES OF ALKALI METAL CHALCOGENIDES: M2CH [M: LI, NA, K, RB; CH: O, S, SE, TE]

2011 ◽  
Vol 25 (29) ◽  
pp. 3911-3925 ◽  
Author(s):  
S. M. ALAY-E-ABBAS ◽  
N. SABIR ◽  
Y. SAEED ◽  
A. SHAUKAT
Keyword(s):  
Alkali Metal ◽  
Electronic Properties ◽  
Structural Properties ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Metal Chalcogenides ◽  
Generalized Gradient ◽  
Electronic Density ◽  
Electronic Band

Ground-state structural properties of alkali metal selenides and tellurides (M2X) [M: Li, Na, K, Rb; X: Se, Te] have been studied in the framework of density functional theory for the first time using local density approximation, Perdew–Burke–Ernzerhof generalized gradient approximation (GGA) and Wu–Cohen (WC) GGA parameterization schemes. Also structural properties of alkali metal oxides and sulfides (M2X) [M: Li, Na, K, Rb; X: O, S] have been reinvestigated using WC GGA. Electronic band structures of alkali metal chalcogenide compounds have been calculated using the aforementioned schemes as well as the modified GGA proposed by Engel and Vosko. The calculated structural parameters for all 16 materials have been compared with earlier theoretical and experimental results, and certain trends are discussed. Furthermore, electronic density of states for these compounds has also been presented herein and behavior in electronic properties analyzed. Li, K and Rb chalcogenides have been found to have indirect bandgap, whereas Na chalcogenides appear to have direct bandgap.

Density Functional Study of the Structural Properties of Copper Iodide: LDA vs GGA Calculations

2009 ◽  
Vol 5 ◽  
pp. 25-30 ◽  
Author(s):  
Heribert Hernández-Cocoletzi ◽  
Gregorio H. Cocoletzi ◽  
J.F. Rivas-Silva ◽  
A. Flores ◽  
Noboru Takeuchi
Keyword(s):  
Structural Properties ◽  
Ground State ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
External Pressure ◽  
Functional Study ◽  
Full Potential ◽  
Copper Iodide ◽  
Generalized Gradient

We have performed first principles total energy calculations to investigate the structural properties of copper iodide (CuI) in its sodium chloride, cesium chloride, zincblende and wurtzite structures. Calculations are done using the density functional theory. We employ the full potential linearized augmented plane wave method as implemented in the wien2k code. The exchange and correlation potential energies are treated in the generalized gradient approximation (GGA), and the local density approximation (LDA). Optical absorption experiments and x-ray diffraction measurements have shown that zincblende is the ground state of CuI. Our calculations find that in the GGA formalism wurtzite and zincblende have similar total energies, while in the LDA formalism the lowest minimum corresponds to zincblende. Results show that the energy difference between the wurtzite and the zincblende structures, as calculated within the GGA formalism is 2 meV, and within the LDA formalism, is 31 meV. These results may suggest a coexistence of both wurtzite and zincblende structures in the ground state of CuI. Structural parameters are correctly reproduced by the GGA calculations. We obtain that under the application of external pressure the atomic configuration may transform into the NaCl structure. At higher pressures it is possible to have a phase transition to the CsCl geometry.

Ab initio study of structural, mechanical, thermal and electronic properties of perovskites Sr(Li,Pd)H3

2016 ◽  
Vol 30 (04) ◽  
pp. 1650003 ◽  
Author(s):  
S. Benlamari ◽  
S. Amara Korba ◽  
S. Lakel ◽  
H. Meradji ◽  
S. Ghemid ◽  
...  
Keyword(s):  
Bulk Modulus ◽  
Electronic Properties ◽  
Elastic Constants ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Local Density ◽  
Velocity Variation ◽  
Full Potential ◽  
Generalized Gradient ◽  
Electronic Band

The structural, elastic, thermal and electronic properties of perovskite hydrides SrLiH3 and SrPdH3 have been investigated using the all-electron full-potential linear augmented plane wave (FP-LAPW) method based on the density functional theory (DFT). For the exchange-correlation potential, local-density approximation (LDA) and generalized gradient approximation (GGA) have been used to calculate theoretical lattice parameters, bulk modulus, and its pressure derivative. The present results are in good agreement with available theoretical and experimental data. The three independent elastic constants [Formula: see text], [Formula: see text] and [Formula: see text] are also reported. From electronic band structure and density of states (DOSs), it is found that SrLiH3 is an insulator characterized by an indirect gap of 3.48 eV, while SrPdH3 is metallic with a calculated DOSs at Fermi energy of 0.745 states/eV-unit cell. Poisson’s ratio [Formula: see text], Young’s modulus (E), shear modulus (G), anisotropy factor (A), average sound velocities [Formula: see text] and density [Formula: see text] of these compounds are also estimated for the first time. The Debye temperature is deduced from the average sound velocity. Variation of elastic constants and bulk modulus of these compounds as a function of pressure is also reported. Pressure and thermal effects on some macroscopic properties are predicted using the quasi-harmonic Debye model.

Elastic properties and electronic structure of the Ni3Sb (cF16) intermetallic

2016 ◽  
Vol 1816 ◽  
Author(s):  
Críspulo E. Deluque ◽  
Susana B. Ramos ◽  
Armando J. Fernández
Keyword(s):  
Elastic Properties ◽  
Density Functional ◽  
Degrees Of Freedom ◽  
Local Density ◽  
Structural Parameters ◽  
Plane Waves ◽  
Full Potential ◽  
Generalized Gradient ◽  
Electronic Density ◽  
Local Density Approximations

ABSTRACTThe possibilities of Ni as contact material in electronic applications has motivated the interest on the intermetallic phases of the Ni-Sb system, in relation to their use in lead free micro-soldering processes. In this work, a detailed theoretical study of the cohesive and thermodynamic properties of the compound Ni3Sb in the (cF16) Fm-3m structure is reported. To this aim, the Full Potential Linearized Augmented Plane Waves method, within the framework of the Density Functional Theory and both Generalized Gradient and Local Density approximations, has been applied. The structural parameters, cohesive and elastic properties of this compound and its constituent elements have been determined. In particular, the equilibrium structural properties are determined through the minimization of the energy, including the full relaxation of the internal degrees of freedom of the cell. It is shown that the calculated properties agree well with the available experimental data. Moreover, various contributions to the electronic density of sates are studied. On this basis, a discussion is presented of the bonding characteristics of this compound, in the framework of the current ideas about cohesion in p-d bonded intermetallics.

scholarly journals Electronic structure, Mechanical and Thermodynamic properties of CoYSb (Y= Cr, Mo, W) half-Heusler compounds as potential spintronic materials

2021 ◽  
Author(s):  
O. T. Uto ◽  
J. O. Akinlami ◽  
S. Kenmoe ◽  
G. A. Adebayo
Keyword(s):  
Density Functional ◽  
Electronic Band Structure ◽  
Structural Phase ◽  
Covalent Bond ◽  
Stable Phase ◽  
Type I ◽  
Generalized Gradient ◽  
Electronic Density ◽  
Electronic Band ◽  
Half Metallic

Abstract The CoYSb (Y = Cr, Mo and W) compounds which are XYZ type half-Heusler alloys and also exist in the face centred cubic MgAgAs-type struc-ture conform to F ̄43m space group. In the present work, these compoundsare investigated in different atomic arrangements called, Type-I, Type-II andType-III phases, using Generalized Gradient Approximation (GGA) in the Density Functional Theory (DFT) implemented in QE (Quantum EspressoAb-Initio Simulation Package). The ferromagnetic state of these alloys is studied after investigating their stable structural phase. The calculated electronic band structure and the total electronic density of states indicated nearly half-metallic behaviour in CoMoSb with a possibility of being used in spintronic application, metallic in CoWSb and half-metallic in CoCrSb, with the minority spin band gap of 0.81 eV. Furthermore, the calculated mechanical properties predicted an anisotropic behaviour of these alloys in the stable phase. Finally, due to its high Debye temperature value, CoCrSb possesses a stronger covalent bond than CoMoSb and CoWSb, respectively.

scholarly journals Structural and Electronic Properties of Orthorhombic Phase Bi2Se3 Based On First-Principles Study

2019 ◽  
Vol 16 (2) ◽  
pp. 77 ◽  
Author(s):  
Muhammad Zamir Mohyedin ◽  
Afiq Radzwan ◽  
Mohammad Fariz Mohamad Taib ◽  
Rosnah Zakaria ◽  
Nor Kartini Jaafar ◽  
...  
Keyword(s):  
Electronic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Computer Code ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Exchange Correlation ◽  
Percentage Difference ◽  
Structural And Electronic Properties

Bi2Se3 is one of the promising materials in thermoelectric devices and very useful out of environmental concern due to its efficiency to perform at room temperature. Based on the first-principles calculation of density functional theory (DFT) by using CASTEP computer code, structural and electronic properties of Bi2Se3 were investigated. The calculation is conducted within the exchange-correlation of local density approximation (LDA) and generalized gradient approximation within the revision of Perdew-Burke-Ernzerhof (GGA-PBE) functional. It was found that the results are consistent with previous works of theoretical study with small percentage difference. LDA exchange-correlation functional method is more accurate and have a better agreement than GGA-PBE to describe the structural properties of Bi2Se3 which consist of lattice parameters. LDA functional also shown more accurate electronic structure of Bi2Se3 that consist of band structure and density of states (DOS) which consistent with most previous theoretical works with small percentage difference. This study proves the reliability of CASTEP computer code and show LDA exchange-correlation functional is more accurate in describing the nature of Bi2Se3 compared to the other functionals.

Structural, electronic and elastic properties of the B2-ScM (M =Au, Hg and Tl) intermetallic compounds: Ab initio calculations

2015 ◽  
Vol 04 (04) ◽  
pp. 1550020
Author(s):  
Ahmad A. Mousa ◽  
Jamil M. Khalifeh
Keyword(s):  
Mechanical Properties ◽  
Bulk Modulus ◽  
Intermetallic Compounds ◽  
Elastic Constants ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Local Density ◽  
Full Potential ◽  
Generalized Gradient ◽  
Electronic Band

Structural, electronic, elastic and mechanical properties of ScM (M[Formula: see text][Formula: see text][Formula: see text]Au, Hg and Tl) intermetallic compounds are studied using the full potential-linearized augmented plane wave (FP-LAPW) method based on the density functional theory (DFT), within the generalized gradient approximation (GGA) and the local density approximation (LDA) to the exchange-correlation approximation energy as implemented in the Wien2k code. The ground state properties including lattice parameters, bulk modulus and elastic constants were all computed and compared with the available previous theoretical and experimental results. The lattice constant was found to increase in contrast to the bulk modulus which was found to decrease with every substitution of the cation (M) starting from Au till Tl in ScM. Both the electronic band structure and density-of-states (DOS) calculations show that these compounds possess metallic properties. The calculated elastic constants ([Formula: see text], [Formula: see text] and [Formula: see text] confirmed the elastic stability of the ScM compounds in the B2-phase. The mechanical properties and ductile behaviors of these compounds are also predicted based on the calculated elastic constants.

A density functional study of Rh13

2013 ◽  
Vol 91 (7) ◽  
pp. 591-597 ◽  
Author(s):  
Patrizia Calaminici ◽  
José M. Vásquez-Pérez ◽  
Diego A. Espíndola Velasco
Keyword(s):  
Molecular Dynamics ◽  
Ground State ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Functional Study ◽  
Ground State Structure ◽  
State Structure ◽  
Generalized Gradient ◽  
Density Functional Study

A density functional study was performed for the Rh13 cluster using the linear combination of Gaussian-type orbitals density functional theory (LCGTO-DFT) approach. The calculations employed both the local density approximation (LDA) as well as the generalized gradient approximation (GGA) in combination with a quasi-relativistic effective core potential (QECP). Initial structures for the geometry optimization were taken along Born–Oppenheimer molecular dynamics (BOMD) trajectories. The BOMD trajectories were performed at different temperatures and considered different potential energy surfaces (PES). As a result, several hundred isomers of the Rh13 cluster in different spin multiplicities were optimized with the aim to determine the lowest energy structures. All geometry optimizations were performed without any symmetry restriction. A vibrational analysis was performed to characterize these isomers. Structural parameters, relative stability energy, harmonic frequencies, binding energy, and most relevant Kohn–Sham (KS) molecular orbitals are reported. The obtained results are compared with available data from the literature. This study predicts a low symmetry biplanarlike structure as the ground-state structure of Rh13 with 11 unpaired electrons. This isomer was first noticed by inspection of first-principle Born–Oppenheimer molecular dynamics (BOMD) simulations between 300 and 600 K. This represents the most extensive theoretical study on the ground-state structure of the Rh13 cluster and underlines the importance of BOMD simulations to fully explore the PES landscapes of complicated systems.

A Density Functional Study of Structure and Stability of Ni8, Ni8 + and Ni8 − Cluster

2005 ◽  
Vol 1 (4) ◽  
pp. 172-182 ◽  
Author(s):  
Patrizia Calaminici ◽  
Marcela R. Beltrán
Keyword(s):  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Binding Energies ◽  
Functional Study ◽  
Generalized Gradient ◽  
Exchange Correlation ◽  
Generalized Gradient Approximation ◽  
The Stability ◽  
Anionic Cluster

Density functional calculations of neutral, cationic and anionic nickel octamer are presented. The structure optimization and frequency analysis were performed on the local density approximation (LDA) level with the exchange correlation functional by Vosko,Wilk and Nusair (VWN). Improved calculations for the stability were based on the generalized gradient approximation (GGA) where the exchange correlation functional of Perdew and Wang (PW) was used. For neutral, cationic and anionic cluster several isomers and different spin multiplicities were investigated in order to find the lowest structures. Structural parameters, relative energies, binding energies, harmonic frequencies, adiabatic ionization potential and electron affinity will be presented. The calculated values are compared with available experimental data.

scholarly journals Study of Structural and Electronic Behavior of BeH2 as Hydrogen Storage Compound: An Ab Initio Approach

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Vikas Nayak ◽  
Suman Banger ◽  
U. P. Verma
Keyword(s):  
Hydrogen Storage ◽  
Electronic Properties ◽  
Density Functional ◽  
Correlation Energy ◽  
Electronic Band Structure ◽  
Unit Cell ◽  
Generalized Gradient ◽  
Hydrogen Atoms ◽  
Electronic Band ◽  
Cell Parameters

The quantum mechanical calculations based on density functional theory (DFT) have been performed to study ground state structural and electronic properties of BeH2 and along with doping of two (BeH2 + 2H) and four (BeH2 + 4H) hydrogen atoms. The generalized gradient approximation (GGA) has been employed for the exchange correlation energy. The most stable space group of BeH2 is Ibam. Its optimized equilibrium unit cell volume, bulk modulus and its first-order pressure derivative, and electronic properties have been obtained. Our predicted unit cell parameters for BeH2  a=9.2463 Å, b=4.2352 Å, and c=7.8464 Å are in very good agreement with the earlier reported experimental and theoretical results. The electronic band structure of BeH2 shows its behavior as an insulator. The stability of BeH2 along with doped hydrogen atoms increases, while the energy band gap decreases with the increase in number of doped hydrogen atoms. On these bases, we predict that BeH2 is a promising material for hydrogen storage.

Investigation of the structural, electronic, elastic and thermodynamic properties of Curium Monopnictides: An ab initio study

2017 ◽  
Vol 31 (30) ◽  
pp. 1750226 ◽  
Author(s):  
H. Baaziz ◽  
Dj. Guendouz ◽  
Z. Charifi ◽  
S. Akbudak ◽  
G. Uğur ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Structural Phase ◽  
Full Potential ◽  
Generalized Gradient ◽  
Metallic Behavior ◽  
Spin Polarized

The structural, electronic, elastic and thermodynamic properties of Curium Monopnictides CmX (X = N, P, As, Sb and Bi) are investigated using first-principles calculations based on the density functional theory (DFT) and full potential linearized augmented plane wave (FP-LAPW) method under ambient condition and high pressure. The exchange-correlation term is treated using two approximations spin-polarized local density approximation (LSDA) and spin-polarized generalized gradient approximation generalized (GGA). The structural parameters such as the equilibrium lattice parameters, bulk modulus and the total energies are calculated in two phases: namely NaCl (B1) and CsCl (B2). The obtained results are compared with the previous theoretical and experimental results. A structural phase transition from B1 phase to B2 phase for Curium pnictides has been obtained. The highest transition pressure is 122 GPa for CmN and the lowest one is 10.0 GPa for CmBi compound. The electronic properties show that these materials exhibit half-metallic behavior in both phases. The magnetic moment is found to be around 7.0 [Formula: see text]B. The mechanical properties of CmX (X = N, P, As, Sb and Bi) are predicted from the calculated elastic constants. Our calculated results are in good agreement with the theoretical results in literature. The effect of pressure and temperature on the thermodynamic properties like the cell volume, bulk modulus and the specific heats C[Formula: see text] and C[Formula: see text], the entropy [Formula: see text] and the Grüneisen parameter [Formula: see text] have been foreseen at expanded pressure and temperature ranges.

Sign in / Sign up

Export Citation Format

Share Document