EFFECTS OF TRANSVERSE MAGNETIC FIELD ON THE PERISTALTIC TRANSPORT OF VISCOELASTIC FLUID WITH JEFFREY MODEL IN A FINITE LENGTH CHANNEL

2011 ◽  
Vol 25 (26) ◽  
pp. 3455-3471 ◽  
Author(s):  
D. TRIPATHI ◽  
T. HAYAT ◽  
N. ALI ◽  
S. K. PANDEY

This paper investigates the peristaltic flow of viscoelastic fluid represented by Jeffrey model in presence of transverse magnetic field under long wavelength and low Reynolds number assumptions. The expressions of pressure gradient, volume flow rate, average volume flow rate and local wall shear stress are obtained. The effects of transverse magnetic field, electrical conductivity (i.e., Hartman number M), relaxation time and retardation time on pressure difference, local wall shear stress, and mechanical efficiency of peristaltic pump are discussed. Reflux limit for viscoelastic fluid is also found and the effects of all parameters on reflux phenomena are discussed. Comparative study of integral and nonintegral number of waves propagate in a train is presented.

2010 ◽  
Vol 7 (3) ◽  
pp. 169-176 ◽  
Author(s):  
S. K. Pandey ◽  
Dharmendra Tripathi

The paper presents an analytical investigation of the peristaltic transport of a viscous fluid under the influence of a magnetic field through a tube of finite length in a dimensionless form. The expressions of pressure gradient, volume flow rate, average volume flow rate and local wall shear stress have been obtained. The effects of the transverse magnetic field and electrical conductivity (i.e. the Hartmann number) on the mechanical efficiency of a peristaltic pump have also been studied. The reflux phenomenon is also investigated. It is concluded, on the basis of the pressure distribution along the tubular length and pumping efficiency, that if the transverse magnetic field and the electric conductivity increase, the pumping machinery exerts more pressure for pushing the fluid forward. There is a linear relation between the averaged flow rate and the pressure applied across one wavelength that can restrain the flow due to peristalsis. It is found that there is a particular value of the averaged flow rate corresponding to a particular pressure that does not depend on the Hartmann number. Naming these values ‘critical values’, it is concluded that the pressure required for checking the flow increases with the Hartmann number above the critical value and decreases with it below the critical value. It is also inferred that magneto-hydrodynamic parameters make the fluid more prone to flow reversal. The conclusion applied to oesophageal swallowing reveals that normal water is easier to swallow than saline water. The latter is more prone to flow reversal. A significant difference between the propagation of the integral and non-integral number of waves along the tube is that pressure peaks are identical in the former and different in the latter cases.


The role of flow parameters of blood is very important in maintaining proper functioning of heart and in turn health body. Herschel–Bulkley fluid model is used for the proposed one-fluid blood flow model. The behavior of important blood flow characteristics wall shear stress, volumetric flow rate and axial velocity of the flow in tapered mild stenosed artery in the presence of externally applied transverse magnetic field is studied. A combination of analytical and numerical methods is used to solve the mathematical model of the system. We report the importance constant/variable viscosity of blood on unsteady flow in the proposed artery. Numerical results are reported for different values of the physical parameters of interest. It is observed with the help of graphs, that the flow characteristics wall shear stress, volumetric flow rate and axial velocity are affected in tapered stenosed artery and flow can be regulated with the help externally applied transverse magnetic field.


2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Neetu Srivastava

Analytical investigation of MHD blood flow in a porous inclined stenotic artery under the influence of the inclined magnetic field has been done. Blood is considered as an electrically conducting Newtonian fluid. The physics of the problem is described by the usual MHD equations along with appropriate boundary conditions. The flow governing equations are finally transformed to nonhomogeneous second-order ordinary differential equations. This model is consistent with the principles of magnetohydrodynamics. Analytical expressions for the velocity profile, volumetric flow rate, wall shear stress, and pressure gradient have been derived. Blood flow characteristics are computed for a specific set of values of the different parameters involved in the model analysis and are presented graphically. Some of the obtained results show that the flow patterns in converging region (ξ<0), diverging region (ξ>0), and nontapered region (ξ=0) are effectively influenced by the presence of magnetic field and change in inclination of artery as well as magnetic field. There is also a significant effect of permeability on the wall shear stress as well as volumetric flow rate.


2021 ◽  
Author(s):  
Amira Husni Talib ◽  
Ilyani Abdullah ◽  
Nik Nabilah Nik Mohd Naser

2019 ◽  
Vol 131 (2) ◽  
pp. 442-452 ◽  
Author(s):  
Alexandra Lauric ◽  
James E. Hippelheuser ◽  
Adel M. Malek

OBJECTIVEEndothelium adapts to wall shear stress (WSS) and is functionally sensitive to positive (aneurysmogenic) and negative (protective) spatial WSS gradients (WSSG) in regions of accelerating and decelerating flow, respectively. Positive WSSG causes endothelial migration, apoptosis, and aneurysmal extracellular remodeling. Given the association of wide branching angles with aneurysm presence, the authors evaluated the effect of bifurcation geometry on local apical hemodynamics.METHODSComputational fluid dynamics simulations were performed on parametric bifurcation models with increasing angles having: 1) symmetrical geometry (bifurcation angle 60°–180°), 2) asymmetrical geometry (daughter angles 30°/60° and 30°/90°), and 3) curved parent vessel (bifurcation angles 60°–120°), all at baseline and double flow rate. Time-dependent and time-averaged apical WSS and WSSG were analyzed. Results were validated on patient-derived models.RESULTSNarrow symmetrical bifurcations are characterized by protective negative apical WSSG, with a switch to aneurysmogenic WSSG occurring at angles ≥ 85°. Asymmetrical bifurcations develop positive WSSG on the more obtuse daughter branch. A curved parent vessel leads to positive apical WSSG on the side corresponding to the outer curve. All simulations revealed wider apical area coverage by higher WSS and positive WSSG magnitudes, with increased bifurcation angle and higher flow rate. Flow rate did not affect the angle threshold of 85°, past which positive WSSG occurs. In curved models, high flow displaced the impingement area away from the apex, in a dynamic fashion and in an angle-dependent manner.CONCLUSIONSApical shear forces and spatial gradients are highly dependent on bifurcation and inflow vessel geometry. The development of aneurysmogenic positive WSSG as a function of angular geometry provides a mechanotransductive link for the association of wide bifurcations and aneurysm development. These results suggest therapeutic strategies aimed at altering underlying unfavorable geometry and deciphering the molecular endothelial response to shear gradients in a bid to disrupt the associated aneurysmal degeneration.


Author(s):  
Kenichi Umezawa ◽  
Akihiro Torisu ◽  
Susumu Kudo ◽  
Ryuhei Yamaguchi

In the present paper, the distribution of the wall shear stress around the apex of the anterior communicating artery (ACoA) in the development process of aneurysm has been studied in laminar steady flow. The anterior communicating artery composing the circle of Willis is one of the predilection sites where the cerebral aneurysm occurs frequently. Once the small aneurysm initiates around the apex in one anterior cerebral artery (ACA) with high flow rate, the distribution of the wall shear stress abruptly changes around the initial aneurysm. With the development of the aneurysm, the wall shear stress distinctly changes along the concaved surface of the aneurysm. The distribution of the wall shear stress in the development process of the aneurysm is physiologically discussed from the viewpoint of hemodynamics.


2015 ◽  
Vol 08 (01) ◽  
pp. 1550010 ◽  
Author(s):  
Om Prakash ◽  
O. D. Makinde ◽  
S. P. Singh ◽  
Nidhi Jain ◽  
Devendra Kumar

In this paper, a mathematical model for steady blood flow through blood vessels with uniform cross-section in stenoses arteries has been proposed. Blood is assumed to be non-Newtonian, incompressible and homogeneous fluid. Blood in human artery is represented as Bingham plastic fluid. Expressions for flow rate, wall shear stress, and resistance to flow against stenoses size have been obtained. Obtained results indicate that stenoses size decreases the flow rate and increases the wall shear stress as well as resistance to flow.


1971 ◽  
Vol 11 (03) ◽  
pp. 223-228 ◽  
Author(s):  
C.I. Pierce ◽  
L.C. Headley ◽  
W.K. Sawyer

Abstract Simplified models, consisting of single, circular channels and channels of different length and diameter in series and parallel combinations, are used in conjunction with the equations of Poiseuille and Hartmann to demonstrate the dependence of the rate of flow of mercury in the models on channel dimensions when the models are subjected to transverse magnetic fields. Experimental tests conducted on mercury-saturated, glass-bead packs and a natural rock sample show that a magnetic field applied transversely to the direction of flow retards flow rate. The magnitude of the magnetic effect increased with increasing bead size and field intensity. Results of this work suggest that magnetic fields have potential in the study of the internal geometry of flow channels in porous media. Introduction The purpose of this work is to determine qualitatively by theoretical and experimental considerations whether or not a magnetic method has potential in the study of the basic properties of rock. The nature of the solid surface and the geometry of the pore network in petroleum-bearing rock plays an important role in the flow behavior of fluids in a petroleum reservoir. Hence, any technique of study that would provide new and additional information on the rock matrix would contribute to a better understanding of petroleum reservoir performance. One such technique appearing to offer performance. One such technique appearing to offer promise is in the area of magnetohydrodynamics. promise is in the area of magnetohydrodynamics. While much research, both theoretical and experimental, has been devoted to the problems concerned with the flow of conducting fluids in transverse magnetic fields in single channels, very little information has been published regarding the behavior of conducting liquids in porous media under the influence of a transverse magnetic field. Perhaps this dearth of information can be attributed Perhaps this dearth of information can be attributed to two main causes:the pores and pore connections are generally so small that intense magnetic fields are required to produce Hartmann numbers of sufficient magnitude to exert appreciable influence on flow rate, andthe extreme complexity of the channel systems in porous media render them intractable to theoretical analysis unless numerous assumptions are made to simplify network geometry. When a conducting fluid moves in a channel in a transverse magnetic field, a force is exerted on the fluid which retards its flow. The magnitude of flow-rate retardation increases with increasing field intensity, channel dimensions and channel-wall conductivity. These magnetohydrodynamic phenomena and theory have been described and developed by various investigators. Since a petroleum reservoir rock is an interconnected network of pores and channels within a rock framework, one would anticipate that the geometry of the network would exert some influence on the magnitude of the effect of a transverse magnetic field on the rate of flow of a conducting fluid therein. The purpose of this work is to demonstrate through the use of simple models and experimental data that the magnetic field effect on flow rate has potential for use in determining size and size potential for use in determining size and size distribution of pores in porous materials. THEORY Electromagnetic induction in liquids is not completely defined, and the complexities involved in many cases appear to defy true analytical expression. However, by applying some simplifying assumptions, these cases may be made tractable to solution to provide qualitative indication of system behavior. The following analysis was conducted in conjunction with laboratory tests to determine if magnet ohydrodynamics has possible potential as a tool for studying the internal geometry of porous systems. When a conducting liquid moves in a channel in a transverse magnetic field, an emf is developed in the channel normal to both the channel axis and the magnetic field. This emf causes circulating currents to flow in the liquid as shown in Fig. 1. SPEJ P. 223


2019 ◽  
Vol 236 (3) ◽  
pp. 522-530
Author(s):  
Roger S. Seymour ◽  
Qiaohui Hu ◽  
Edward P. Snelling

2015 ◽  
Vol 27 (05) ◽  
pp. 1550048
Author(s):  
N. Meghdadi ◽  
H. Niroomand-Oscuii

Arterio-Venous grafts, which are used for hemodialysis, frequently develop intimal hyperplasia in venous anastomosis which ultimately leads to graft failure. It is observed in different studies that the wall shear stress can be correlated to intimal hyperplasia development. Although high Arterio-Venous access blood flow has been implicated in the pathogenesis of graft stenosis, the role of needle's angle and flow rate during the hemodialysis procedure are relatively unexplored. Since the flow field in the region of the venous needle may be a source of damage, in the current study, a numerical investigation of the effect of venous needle's angle and flow rate on hemodynamic parameters of the flow inside a hemodialysis graft has been carried out. Five cases of different needle angles and flow rates with graft flow rate of 500 ml/min have been investigated. Results indicate that in lower angle and lower flow rates the risk of damage is less because of lower wall shear stress and more uniform shear stress distribution on graft wall.


Sign in / Sign up

Export Citation Format

Share Document