Ab-initio prediction of structural, electronic and magnetic properties of Hexafluoromanganete(IV) complexes

2018 ◽  
Vol 32 (24) ◽  
pp. 1850270 ◽  
Author(s):  
M. Faizan ◽  
S. H. Khan ◽  
A. Khan ◽  
A. Laref ◽  
G. Murtaza

In this work, detailed electronic structure calculations of alkali metal fluorides A2MnF6 (A = K, Rb, Cs) have been performed using ab-initio calculating techniques based on density functional theory (DFT). We applied different exchange correlation functionals, namely Wu–Cohen generalized gradient approximation (WC-GGA), modified Becke Johnson potential (mBJ) and GGA plus Hubbard U method in order to treat the exchange correlation energy. The calculated lattice constants are found in excellent agreement with earlier experimental results. The electronic band structure and density of states show that Cs2MnF6 is half metallic, exhibiting semiconductivity in spin up direction and metallic behavior in spin down direction. The compounds, K2MnF6 and Rb2MnF6, are predicted as wide bandgap materials. The DFT + U method gives quite accurate results of the electronic bandgap as compared with other approximations. The states Mn-3d and F-2p contribute largely to the conduction and valence energy bands. Additionally, magnetic calculations reveal strong ferromagnetic nature of these compounds. The half-metallic nature along with ferromagnetism make Cs2MnF6 a promising candidate for future applications in spintronics. Furthermore, the wide bandgap observed in K2MnF6 and Rb2MnF6 indicate their utility for light-emitting diodes (LEDs) transparent lenses and optical coatings.

Author(s):  
Khodja Djamila ◽  
Djaafri Tayeb ◽  
Djaafri Abdelkader ◽  
Bendjedid Aicha ◽  
Hamada Khelifa ◽  
...  

The investigations of the strain effects on magnetism, elasticity, electronic, optical and thermodynamic properties of PdVTe half-Heusler alloy are carried out using the most accurate methods to electronic band structure, i.e. the full-potential linearized augmented plane wave plus a local orbital (FP-LAPW + lo) approach. The analysis of the band structures and the density of states reveals the Half-metallic behavior with a small indirect band gap Eg of 0.51 eV around the Fermi level for the minority spin channels. The study of magnetic properties led to the predicted value of total magnetic moment µtot = 3µB, which nicely follows the Slater–Pauling rule µtot = Zt -18. Several optical properties are calculated for the first time and the predicted values are in line with the Penn model. It is shown from the imaginary part of the complex dielectric function that the investigated alloy is optically metallic. The variations of thermodynamic parameters calculated using the quasi-harmonic Debye model, accord well with the results predicted by the Debye theory. Moreover, the dynamical stability of the investigated alloy is computed by means of the phonon dispersion curves, the density of states, and the formation energies. Finally, the analysis of the strain effects reveals that PdVTe alloy preserves its ferromagnetic half metallic behavior, it remains mechanically stable, the ionic nature dominates the atomic bonding, and the thermodynamic and the optical properties keep the same features in a large interval of pressure.


2019 ◽  
Author(s):  
Helena M Ferreira ◽  
Elsa B Lopes ◽  
José F Malta ◽  
Luís M Ferreira ◽  
Maria H Casimiro ◽  
...  

Vaesite, a nickel chalcogenide with NiS2 formula, has been synthetized and studied by theoretical and experimental methods. NiS2 was prepared by solid-state reaction under vacuum and densified by hot-pressing, at different consolidation conditions. Dense single-phase pellets (relative densities >94%) were obtained, without significant lattice distortions for different hot-pressing conditions. The thermal stability of NiS2 was studied by thermogravimetric analysis. Both as-synthetized and hot-pressed NiS2 have a single phase nature, although some hot-pressed samples had traces of the sulfur deficient phase, Ni1-xS (<1%vol), due to the strong desulfurization at T > 340ºC. The electronic band structure and density of states were calculated by Density Functional Theory (DFT), indicating a metallic behavior. However, the electronic transport measurements showed p-type semiconductivity for bulk NiS2, verifying its characteristic behavior has a Mott insulator. The consolidation conditions strongly influence the electronic properties, with the best room-temperature Seebeck coefficient, electrical resistivity and power factor being 182µVK-1, 2257μΩm and 14.1µWK-2m-1, respectively, pointing this compound as a good starting point for a new family of thermoelectric materials.


2021 ◽  
Author(s):  
O. T. Uto ◽  
J. O. Akinlami ◽  
S. Kenmoe ◽  
G. A. Adebayo

Abstract The CoYSb (Y = Cr, Mo and W) compounds which are XYZ type half-Heusler alloys and also exist in the face centred cubic MgAgAs-type struc-ture conform to F ̄43m space group. In the present work, these compoundsare investigated in different atomic arrangements called, Type-I, Type-II andType-III phases, using Generalized Gradient Approximation (GGA) in the Density Functional Theory (DFT) implemented in QE (Quantum EspressoAb-Initio Simulation Package). The ferromagnetic state of these alloys is studied after investigating their stable structural phase. The calculated electronic band structure and the total electronic density of states indicated nearly half-metallic behaviour in CoMoSb with a possibility of being used in spintronic application, metallic in CoWSb and half-metallic in CoCrSb, with the minority spin band gap of 0.81 eV. Furthermore, the calculated mechanical properties predicted an anisotropic behaviour of these alloys in the stable phase. Finally, due to its high Debye temperature value, CoCrSb possesses a stronger covalent bond than CoMoSb and CoWSb, respectively.


Author(s):  
I. S. Okunzuwa ◽  
E. Aigbekaen Eddy

We calculated the structural, electronic, mechanical and thermal properties of Fe3Al semiconducting using Quantum ESPRESSO, an open source first principles code based on density-functional theory, plane waves, and pseudopotentials. Structural parameter results (equilibrium lattice parameters, bulk modulus and its derivative pressure) have been reported. The underestimated band gap is obtained along with higher state density and energy bands around the fermi level. Mechanical properties of the rock-salt structure of Fe3Al, such as, shear modulus (G), Young’s modulus (E), and Poisson’s ratio () were investigated. The thermodynamic parameters are also present. The results are in good agreement with the available experimental and other theoretical results.


2014 ◽  
Vol 70 (a1) ◽  
pp. C1806-C1806
Author(s):  
Samir Bentata ◽  
Bouabdellah Bouadjemi ◽  
Tayeb Lantri ◽  
Wissem Benstaali

We investigate the structural, electronic and magnetic properties of the orthorhombic Perovskite oxyde NdMnO3 through density-functional-theory (DFT) calculations using both generalized gradient approximation GGA+U, where U is on-site Coulomb interaction correction. The electronic band structure, the partial and total density of states (DOS) and the magnetic moment are determined. The results show a half-metallic ferromagnetic ground state for the orthorhombic NdMnO3.


2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Vikas Nayak ◽  
Suman Banger ◽  
U. P. Verma

The quantum mechanical calculations based on density functional theory (DFT) have been performed to study ground state structural and electronic properties of BeH2 and along with doping of two (BeH2 + 2H) and four (BeH2 + 4H) hydrogen atoms. The generalized gradient approximation (GGA) has been employed for the exchange correlation energy. The most stable space group of BeH2 is Ibam. Its optimized equilibrium unit cell volume, bulk modulus and its first-order pressure derivative, and electronic properties have been obtained. Our predicted unit cell parameters for BeH2  a=9.2463 Å, b=4.2352 Å, and c=7.8464 Å are in very good agreement with the earlier reported experimental and theoretical results. The electronic band structure of BeH2 shows its behavior as an insulator. The stability of BeH2 along with doped hydrogen atoms increases, while the energy band gap decreases with the increase in number of doped hydrogen atoms. On these bases, we predict that BeH2 is a promising material for hydrogen storage.


2007 ◽  
Vol 244 (12) ◽  
pp. 4643-4650 ◽  
Author(s):  
G. Jaiganesh ◽  
R. D. Eithiraj ◽  
G. Kalpana ◽  
M. Rajagopalan

2019 ◽  
Vol 61 (4) ◽  
pp. 659
Author(s):  
Uttam Kumar Chowdhury ◽  
Tapas Chandra Saha

AbstractUsing ab initio technique the physical properties of ScIr_2 superconductor have been investigated with T _c 1.03 K with a MgCu_2-type structure. We have carried out the plane-wave pseudopotential approach within the framework of the first-principles density functional theory (DFT) implemented within the CASTEP code. The calculated structural parameters confirm a good agreement with the experimental and other theoretical results. Using the Voigt-Reuss-Hill (VRH) averaging scheme the most important elastic properties including the bulk modulus B, shear modulus G , Young’s modulus E and Poisson’s ratio ν of ScIr_2 are determined. At ambient condition, the values of Cauchy pressure and Pugh’s ratio exhibit ductile nature of ScIr_2. The electronic and optical properties of ScIr_2 were investigated for the first time. The electronic band structure reveals metallic conductivity and the major contribution comes from Ir-5 d states. In the ultraviolet region the reflectivity is high up to 50 eV as evident from the reflectivity spectrum.


2021 ◽  
Author(s):  
O. T. Uto ◽  
J. O. Akinlami ◽  
S. Kenmoe ◽  
G. A. Adebayo

Abstract We used Density Functional Theory (DFT) calculations to investigate the structural, electronic, magnetic, mechanical and thermodynamic properties of CoYSb (Y = Cr, Mo and W) compounds. These are XYZ type half-Heusler alloys, which also exist in the face centred cubic MgAgAs-type structure and conform to F¯43m space group. We computed these properties in three different atomic arrangements known as Type-I, Type-II and Type-III phases. In all these phases, the alloys were found to be in the ferromagnetic state. Furthermore, the calculated electronic band structure and the total electronic density of states indicated a metallic behaviour in CoWSb, nearly half-metallic in CoMoSb and half-metallic in CoCrSb, with a minority-spin band gap of 0.81 eV. Furthermore, the calculated mechanical properties predicted an anisotropic behaviour of these alloys in their stable phase. Finally, due to its high Debye temperature value, CoCrSb shows stronger covalent bonding than CoMoSb and CoWSb, respectively.


2016 ◽  
Vol 30 (08) ◽  
pp. 1650034 ◽  
Author(s):  
Mohammed El Amine Monir ◽  
H. Baltache ◽  
R. Khenata ◽  
G. Murtaza ◽  
R. Ahmed ◽  
...  

In this paper, spin-polarized density functional calculations on the structural, electronic, optical and magnetic properties of the zincblende structure of the [Formula: see text] and [Formula: see text] alloys at [Formula: see text] in the ferromagnetic (FM) ordering has been investigated. The study is accomplished using the full-potential (FP) linearized augmented plane wave plus local orbital (LAPW[Formula: see text]lo) self-consistent scheme of calculations. To incorporate the exchange correlation component in the total energy calculations of the crystal, Perdew–Burke and Ernzerhof (PBE) parameterization for the generalized gradient approximation (GGA) and GGA[Formula: see text]U are employed. Basically, for both alloys, to address their structural properties, we calculated their equilibrium lattice constants, bulk moduli as well as pressure derivatives. In general, from the analysis of the obtained electronic band structure of these alloys, the half-metallic nature of [Formula: see text] and nearly half-metallic nature of the [Formula: see text] alloy are demonstrated. The plotted density of states (DOS) curves project spin-exchange splitting energy [Formula: see text] and [Formula: see text] as generated by V-3d states. It has been clearly evident that the effective potential results for the spin-down case are more striking than for the spin-up case. In order to describe the magnetic behavior of these alloys, the exchange constants [Formula: see text] (valence band) and [Formula: see text] (conduction band) as well as the magnetic moment values are estimated. The calculated results of the magnetic moment show that the main source in the reduction of the local magnetic moment of V in the alloys in comparison with its free value is a [Formula: see text]–[Formula: see text] orbital hybridization and partial transfer to nonmagnetic sites of (Zn, S) and (Cd, S) in [Formula: see text] and [Formula: see text] alloys. In addition, a study concerning optical properties, such as the refractive index, reflectivity and absorption coefficients is performed to determine their potential for optical and optoelectronic devices.


Sign in / Sign up

Export Citation Format

Share Document