THE WING-BODY AEROELASTIC ANALYSES USING THE INVERSE DESIGN METHOD

2010 ◽  
Vol 24 (13) ◽  
pp. 1479-1482
Author(s):  
SEUNG JUN LEE ◽  
DONG-KYUN IM ◽  
IN LEE ◽  
JANG-HYUK KWON
Keyword(s):  
Design Method ◽  
The Body ◽  
Inverse Design ◽  
Navier Stokes ◽  
Full Potential ◽  
Small Disturbance ◽  
Body Effect ◽  
Flow Equations ◽  
Applicable Range ◽  
Inverse Design Method

Flutter phenomenon is one of the most dangerous problems in aeroelasticity. When it occurs, the aircraft structure can fail in a few second. In recent aeroelastic research, computational fluid dynamics (CFD) techniques become important means to predict the aeroelastic unstable responses accurately. Among various flow equations like Navier-Stokes, Euler, full potential and so forth, the transonic small disturbance (TSD) theory is widely recognized as one of the most efficient theories. However, the small disturbance assumption limits the applicable range of the TSD theory to the thin wings. For a missile which usually has small aspect ratio wings, the influence of body aerodynamics on the wing surface may be significant. Thus, the flutter stability including the body effect should be verified. In this research an inverse design method is used to complement the aerodynamic deficiency derived from the fuselage. MGM (modified Garabedian-McFadden) inverse design method is used to optimize the aerodynamic field of a full aircraft model. Furthermore, the present TSD aeroelastic analyses do not require the grid regeneration process. The MGM inverse design method converges faster than other conventional aerodynamic theories. Consequently, the inverse designed aeroelastic analyses show that the flutter stability has been lowered by the body effect.

Hydrodynamic Design of Pump Diffuser Using Inverse Design Method and CFD

2002 ◽  
Vol 124 (2) ◽  
pp. 319-328 ◽  
Author(s):  
Akira Goto ◽  
Mehrdad Zangeneh
Keyword(s):  
Design Method ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Inverse Design ◽  
Navier Stokes ◽  
Outer Diameter ◽  
Large Area ◽  
Suction Surface ◽  
Pump Stage ◽  
Inverse Design Method

A new approach to optimizing a pump diffuser is presented, based on a three-dimensional inverse design method and a Computational Fluid Dynamics (CFD) technique. The blade shape of the diffuser was designed for a specified distribution of circulation and a given meridional geometry at a low specific speed of 0.109 (non-dimensional) or 280 (m3/min, m, rpm). To optimize the three-dimensional pressure fields and the secondary flow behavior inside the flow passage, the diffuser blade was more fore-loaded at the hub side as compared with the casing side. Numerical calculations, using a stage version of Dawes three-dimensional Navier-Stokes code, showed that such a loading distribution can suppress flow separation at the corner region between the hub and the blade suction surface, which was commonly observed with conventional designs having a compact bowl size (small outer diameter). The improvements in stage efficiency were confirmed experimentally over the corresponding conventional pump stage. The application of multi-color oil-film flow visualization confirmed that the large area of the corner separation was completely eliminated in the inverse design diffuser.

A Novel Two Dimensional Viscous Inverse Design Method for Turbomachinery Blading

2002 ◽  
Author(s):  
L. de Vito ◽  
R. A. Van den Braembussche ◽  
H. Deconinck
Keyword(s):  
Pressure Distribution ◽  
Design Method ◽  
Turbine Blades ◽  
Inverse Design ◽  
Navier Stokes ◽  
Particular Solution ◽  
Target Pressure ◽  
Inverse Design Method ◽  
Euler Solver ◽  
Stagger Angle

This paper presents a novel iterative viscous inverse method for turbomachinery blading design. It is made up of two steps: The first one consists of an analysis by means of a Navier-Stokes solver, the second one is an inverse design by means of an Euler solver. The inverse design resorts to the concept of permeable wall, and recycles the ingredients of Demeulenaere’s inviscid inverse design method that was proven fast and robust. The re-design of the LS89 turbine nozzle blade, starting from different arbitrary profiles at subsonic and transonic flow regimes, demonstrates the merits of this approach. The method may result in more than one blade profile that meets the objective, i.e. that produces the viscous target pressure distribution. To select one particular solution among all candidates, a target mass flow is enforced by adjusting the outlet static pressure. The resulting profiles are smooth (oscillation-free). The design of turbine blades with arbitrary pressure distribution at transonic and supersonic outflow illustrates the correct behavior of the method for a large range of applications. The approach is flexible because only the pitch chord ratio is fixed and no limitations are imposed on the stagger angle.

Inviscid-Viscous Interaction Method for 3D Inverse Design of Centrifugal Impellers

1993 ◽  
Author(s):  
M. Zangeneh
Keyword(s):  
Design Method ◽  
Thickness Distribution ◽  
Pressure Ratio ◽  
Inverse Design ◽  
Navier Stokes ◽  
Viscous Effects ◽  
High Pressure Ratio ◽  
Circulation Distribution ◽  
Inverse Design Method ◽  
Blade Geometry

A 3D inverse design method for the design of the blade geometry of centrifugal compressor impellers is presented. In this method the blade shape is computed for a specified circulation distribution, normal (or tangential) thickness distribution and meridional geometry. As the blade shapes are computed by using an inviscid slip (or flow tangency) condition, the viscous effects are introduced indirectly by using a viscous/inviscid procedure. The 3D Navier-Stokes solver developed by Dawes is used as the viscous method. Two different approaches are described for incorporating the viscous effects into the inviscid design method. One method is based on the introduction of an aerodynamic blockage distribution throughout the meridional geometry. While in the other approach a vorticity term directly related to the entropy gradients in the machine is introduced. The method is applied to redesign the blade geometry of Eckardt’s 30° backswept impeller as well as a generic high pressure ratio (transonic) impeller. The results indicate that the entropy gradient approach can fairly accurately represent the viscous effects in the machine.

A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading

2003 ◽  
Vol 125 (2) ◽  
pp. 310-316 ◽  
Author(s):  
L. de Vito ◽  
R. A. Van den Braembussche ◽  
H. Deconinck
Keyword(s):  
Pressure Distribution ◽  
Design Method ◽  
Turbine Blades ◽  
Inverse Design ◽  
Navier Stokes ◽  
Particular Solution ◽  
Target Pressure ◽  
Inverse Design Method ◽  
Euler Solver ◽  
Stagger Angle

This paper presents a novel iterative viscous inverse design method for turbomachinery blading. It is made up of two steps: the first one consists of an analysis by means of a Navier-Stokes solver; the second one is an inverse design by means of an Euler solver. The inverse design resorts to the concept of permeable wall, and recycles the ingredients of Demeulenaere’s inviscid inverse design method that was proven fast and robust. The re-design of the LS89 turbine nozzle blade, starting from different arbitrary profiles at subsonic and transonic flow regimes, demonstrates the merits of this approach. The method may result in more than one blade profile that meets the objective, i.e., that produces the viscous target pressure distribution. To select one particular solution among all candidates, a target mass flow is enforced by adjusting the outlet static pressure. The resulting profiles are smooth (oscillation-free). The design of turbine blades with arbitrary pressure distribution at transonic and supersonic outflow illustrates the correct behavior of the method for a large range of applications. The approach is flexible because only the pitch chord ratio is fixed and no limitations are imposed on the stagger angle.

AN INVERSE DESIGN METHOD FOR A WING IN FULL CRUISING CONFIGURATION OF A REGIONAL AIRCRAFT VIA RANS APPROACH

2020 ◽  
Vol 51 (1) ◽  
pp. 1-13
Author(s):  
Anatoliy Longinovich Bolsunovsky ◽  
Nikolay Petrovich Buzoverya ◽  
Nikita Aleksandrovich Pushchin
Keyword(s):  
Design Method ◽  
Inverse Design ◽  
Inverse Design Method

scholarly journals Aerodynamic Inverse Design of Transonic Compressor Cascades with Stabilizing Elastic Surface Algorithm

2021 ◽  
Vol 11 (11) ◽  
pp. 4845
Author(s):  
Mohammad Hossein Noorsalehi ◽  
Mahdi Nili-Ahmadabadi ◽  
Seyed Hossein Nasrazadani ◽  
Kyung Chun Kim
Keyword(s):  
Design Method ◽  
Inverse Design ◽  
Normal Shock ◽  
Compressor Cascade ◽  
Elastic Surface ◽  
Transonic Compressor ◽  
Pressure Distributions ◽  
The Difference ◽  
Inverse Design Method ◽  
Transonic Cascade

The upgraded elastic surface algorithm (UESA) is a physical inverse design method that was recently developed for a compressor cascade with double-circular-arc blades. In this method, the blade walls are modeled as elastic Timoshenko beams that smoothly deform because of the difference between the target and current pressure distributions. Nevertheless, the UESA is completely unstable for a compressor cascade with an intense normal shock, which causes a divergence due to the high pressure difference near the shock and the displacement of shock during the geometry corrections. In this study, the UESA was stabilized for the inverse design of a compressor cascade with normal shock, with no geometrical filtration. In the new version of this method, a distribution for the elastic modulus along the Timoshenko beam was chosen to increase its stiffness near the normal shock and to control the high deformations and oscillations in this region. Furthermore, to prevent surface oscillations, nodes need to be constrained to move perpendicularly to the chord line. With these modifications, the instability and oscillation were removed through the shape modification process. Two design cases were examined to evaluate the method for a transonic cascade with normal shock. The method was also capable of finding a physical pressure distribution that was nearest to the target one.

A Three-Dimensional Viscous Transonic Inverse Design Method

2000 ◽  
Author(s):  
W. T. Tiow ◽  
M. Zangeneh
Keyword(s):  
Design Method ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Viscous Effects ◽  
Flow Equations ◽  
Flow Solution ◽  
Turbomachinery Blades ◽  
A Cell ◽  
Inverse Design Method ◽  
Euler Solver

The development and application of a three-dimensional inverse methodology is presented for the design of turbomachinery blades. The method is based on the mass-averaged swirl, rV~θ distribution and computes the necessary blade changes directly from the discrepancies between the target and initial distributions. The flow solution and blade modification converge simultaneously giving the final blade geometry and the corresponding steady state flow solution. The flow analysis is performed using a cell-vertex finite volume time-marching algorithm employing the multistage Runge-Kutta integrator in conjunction with accelerating techniques (local time stepping and grid sequencing). To account for viscous effects, dissipative forces are included in the Euler solver using the log-law and mixing length models. The design method can be used with any existing solver solving the same flow equations without any modifications to the blade surface wall boundary condition. Validation of the method has been carried out using a transonic annular turbine nozzle and NASA rotor 67. Finally, the method is demonstrated on the re-design of the blades.

Inverse Design of Axial-Flow Compressor Blades Using Elastic Surface Algorithm in Subsonic and Transonic Flow Regimes With Separation

2016 ◽  
Author(s):  
M. H. Noorsalehi ◽  
M. Nili-Ahamadabadi ◽  
E. Shirani ◽  
M. Safari
Keyword(s):  
Pressure Distribution ◽  
Transonic Flow ◽  
Design Method ◽  
Axial Flow ◽  
Flow Regimes ◽  
Inverse Design ◽  
Elastic Surface ◽  
Axial Flow Compressor ◽  
Inverse Design Method ◽  
Flow Compressor

In this study, a new inverse design method called Elastic Surface Algorithm (ESA) is developed and enhanced for axial-flow compressor blade design in subsonic and transonic flow regimes with separation. ESA is a physically based iterative inverse design method that uses a 2D flow analysis code to estimate the pressure distribution on the solid structure, i.e. airfoil, and a 2D solid beam finite element code to calculate the deflections due to the difference between the calculated and target pressure distributions. In order to enhance the ESA, the wall shear stress distribution, besides pressure distribution, is applied to deflect the shape of the airfoil. The enhanced method is validated through the inverse design of the rotor blade of the first stage of an axial-flow compressor in transonic viscous flow regime. In addition, some design examples are presented to prove the effectiveness and robustness of the method. The results of this study show that the enhanced Elastic Surface Algorithm is an effective inverse design method in flow regimes with separation and normal shock.

Sign in / Sign up

Export Citation Format

Share Document