Hydrodynamic Design of Pump Diffuser Using Inverse Design Method and CFD

2002 ◽  
Vol 124 (2) ◽  
pp. 319-328 ◽  
Author(s):  
Akira Goto ◽  
Mehrdad Zangeneh
Keyword(s):  
Design Method ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Inverse Design ◽  
Navier Stokes ◽  
Outer Diameter ◽  
Large Area ◽  
Suction Surface ◽  
Pump Stage ◽  
Inverse Design Method

A new approach to optimizing a pump diffuser is presented, based on a three-dimensional inverse design method and a Computational Fluid Dynamics (CFD) technique. The blade shape of the diffuser was designed for a specified distribution of circulation and a given meridional geometry at a low specific speed of 0.109 (non-dimensional) or 280 (m3/min, m, rpm). To optimize the three-dimensional pressure fields and the secondary flow behavior inside the flow passage, the diffuser blade was more fore-loaded at the hub side as compared with the casing side. Numerical calculations, using a stage version of Dawes three-dimensional Navier-Stokes code, showed that such a loading distribution can suppress flow separation at the corner region between the hub and the blade suction surface, which was commonly observed with conventional designs having a compact bowl size (small outer diameter). The improvements in stage efficiency were confirmed experimentally over the corresponding conventional pump stage. The application of multi-color oil-film flow visualization confirmed that the large area of the corner separation was completely eliminated in the inverse design diffuser.

An experience-independent inverse design optimization method of compressor cascade airfoil

2019 ◽  
Vol 233 (4) ◽  
pp. 431-442 ◽  
Author(s):  
Yujie Zhu ◽  
Yaping Ju ◽  
Chuhua Zhang
Keyword(s):  
Design Optimization ◽  
Design Method ◽  
Three Dimensional ◽  
Optimal Solution ◽  
Leading Edge ◽  
Optimization Method ◽  
Inverse Design ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Inverse Design Method

Most of the inverse design methods of turbomachinery experience the shortcoming where the target aerodynamic parameters need to be manually specified depending on the designers’ experience and insight, making the design result aleatory and even deviated from the real optimal solution. To tackle this problem, an experience-independent inverse design optimization method is proposed and applied to the redesign of a compressor cascade airfoil in this study. The experience-independent inverse design optimization method can automatically obtain the target pressure distribution along the cascade airfoil through the genetic algorithm, rather than through the manual specification approach. The shape of cascade airfoil is then solved by the adjoint method. The effectiveness of the experience-independent inverse design optimization method is demonstrated by two inverse design cases of the compressor cascade airfoil, i.e. the inverse design of only the suction surface and the inverse design of both the suction and pressure surfaces. The results show that the proposed inverse design method is capable of significantly improving the aerodynamic performance of the compressor cascade. At the examined flow condition, a thin airfoil profile is beneficial to flow accelerations near the leading edge and flow separation avoidance near the trailing edge. The proposed inverse design method is quite generic and can be extended to the three-dimensional inverse design of advanced compressor blades.

Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of Three-Dimensional Inverse Design Method: Part 2—Experimental Validation

1996 ◽  
Vol 118 (3) ◽  
pp. 544-551 ◽  
Author(s):  
A. Goto ◽  
T. Takemura ◽  
M. Zangeneh
Keyword(s):  
Design Method ◽  
Three Dimensional ◽  
Flow Fields ◽  
Secondary Flows ◽  
Inverse Design ◽  
Suction Surface ◽  
Mixed Flow ◽  
Pump Impeller ◽  
Inverse Design Method ◽  
Flow Pump

In Part 1 of this paper, a mixed-flow pump impeller was designed by a fully three-dimensional inverse design method, aimed at suppressing the secondary flows on the blade suction surface. In this part, the internal flow fields of the impeller are investigated experimentally, using flow visualization and phase-locked measurements of the impeller exit flow, in order to validate the effects of secondary flow suppression. The flow fields are compared with those of a conventional impeller, and it is confirmed that the secondary flows on the blade suction surface are well suppressed and the uniformity of the exit flow fields is improved substantially, in both circumferential and spanwise directions. The effects of tip clearance and the number of blades for the inverse designed impeller are also investigated experimentally and numerically.

Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of Three-Dimensional Inverse Design Method: Part 1—Design and Numerical Validation

1996 ◽  
Vol 118 (3) ◽  
pp. 536-543 ◽  
Author(s):  
M. Zangeneh ◽  
A. Goto ◽  
T. Takemura
Keyword(s):  
Flow Field ◽  
Design Method ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Inverse Design ◽  
Suction Surface ◽  
Mixed Flow ◽  
Pump Impeller ◽  
Inverse Design Method ◽  
Flow Pump

This paper describes the design of the blade geometry of a medium specific speed mixed flow pump impeller by using a three-dimensional inverse design method in which the blade circulation (or rVθ) is specified. The design objective is the reduction of impeller exit flow nonuniformity by reducing the secondary flows on the blade suction surface. The paper describes in detail the aerodynamic criteria used for the suppression of secondary flows with reference to the loading distribution and blade stacking condition used in the design. The flow through the designed impeller is computed by Dawes’ viscous code, which indicates that the secondary flows are well suppressed on the suction surface. Comparison between the predicted exit flow field of the inverse designed impeller and a corresponding conventional impeller indicates that the suppression of secondary flows has resulted in substantial improvement in the exit flow field. Experimental comparison of the flow fields inside and at exit from the conventional and the inverse designed impeller is made in Part 2 of the paper.

scholarly journals Three-Dimensional Inverse Design Method for Hydraulic Machinery

Energies ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 3210
Author(s):  
Wei Yang ◽  
Benqing Liu ◽  
Ruofu Xiao
Keyword(s):  
High Performance ◽  
Design Method ◽  
Three Dimensional ◽  
Inverse Design ◽  
Blade Loading ◽  
Hydraulic Machinery ◽  
Main Challenge ◽  
Blade Shape ◽  
Stacking Condition ◽  
Inverse Design Method

Hydraulic machinery with high performance is of great significance for energy saving. Its design is a very challenging job for designers, and the inverse design method is a competitive way to do the job. The three-dimensional inverse design method and its applications to hydraulic machinery are herein reviewed. The flow is calculated based on potential flow theory, and the blade shape is calculated based on flow-tangency condition according to the calculated flow velocity. We also explain flow control theory by suppression of secondary flow and cavitation based on careful tailoring of the blade loading distribution and stacking condition in the inverse design of hydraulic machinery. Suggestions about the main challenge and future prospective of the inverse design method are given.

scholarly journals Controlling three-dimensional optical fields via inverse Mie scattering

2019 ◽  
Vol 5 (10) ◽  
pp. eaax4769 ◽  
Author(s):  
Alan Zhan ◽  
Ricky Gibson ◽  
James Whitehead ◽  
Evan Smith ◽  
Joshua R. Hendrickson ◽  
...  
Keyword(s):  
Design Method ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Mie Scattering ◽  
Three Dimensions ◽  
Inverse Design ◽  
Optical Fields ◽  
Optical Elements ◽  
Space Optics ◽  
Inverse Design Method

Controlling the propagation of optical fields in three dimensions using arrays of discrete dielectric scatterers is an active area of research. These arrays can create optical elements with functionalities unrealizable in conventional optics. Here, we present an inverse design method based on the inverse Mie scattering problem for producing three-dimensional optical field patterns. Using this method, we demonstrate a device that focuses 1.55-μm light into a depth-variant discrete helical pattern. The reported device is fabricated using two-photon lithography and has a footprint of 144 μm by 144 μm, the largest of any inverse-designed photonic structure to date. This inverse design method constitutes an important step toward designer free-space optics, where unique optical elements are produced for user-specified functionalities.

Multi-Objective Optimization of a High Specific Speed Centrifugal Volute Pump Using Three-Dimensional Inverse Design Coupled With Computational Fluid Dynamics Simulations

2020 ◽  
Vol 143 (2) ◽  
Author(s):  
Luying Zhang ◽  
Gabriel Davila ◽  
Mehrdad Zangeneh
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Design Method ◽  
Three Dimensional ◽  
Inverse Design ◽  
Computational Time ◽  
Specific Speed ◽  
Meridional Shape ◽  
Inverse Design Method ◽  
Blade Geometry

Abstract This paper presents three different multiobjective optimization strategies for a high specific speed centrifugal volute pump design. The objectives of the optimization consist of maximizing the efficiency and minimizing the cavitation while maintaining the Euler head. The first two optimization strategies use a three-dimensional (3D) inverse design method to parametrize the blade geometry. Both meridional shape and 3D blade geometry are changed during the optimization. In the first approach, design of experiment (DOE) method is used and the pump efficiency is obtained from computational fluid dynamics (CFD) simulations, while cavitation is evaluated by using minimum pressure on blade surface predicted by 3D inverse design method. The design matrix is then used to create a surrogate model where optimization is run to find the best tradeoff between cavitation and efficiency. This optimized geometry is manufactured and tested and is found to be 3.9% more efficient than the baseline with reduced cavitation at high flow. In the second approach, only the 3D inverse design method output is used to compute the efficiency and cavitation parameters and this leads to considerable reduction to the computational time. The resulting optimized geometry is found to be similar to the computationally more expensive solution based on 3D CFD results. In order to compare the inverse design based optimization to the conventional optimization, an equivalent optimization is carried out by parametrizing the blade angle and meridional shape.

Dual Point Redesign of Axial Turbines Using a Viscous Inverse Design Method

2009 ◽  
Author(s):  
Benedikt Roidl ◽  
Wahid Ghaly
Keyword(s):  
Inverse Method ◽  
Stokes Equations ◽  
Design Method ◽  
Single Point ◽  
Accurate Solution ◽  
Inverse Design ◽  
Suction Surface ◽  
Pressure Distributions ◽  
Wide Range ◽  
Inverse Design Method

A new dual-point inverse blade design method was developed and applied to the redesign of a highly loaded transonic vane, the VKI-LS89, and the first 2.5 stages of a low speed subsonic turbine, the E/TU-4 4-stage turbine that is built and tested at the university of Hannover, Germany. In this inverse method, the blade walls move with a virtual velocity distribution derived from the difference between the current and the target pressure distributions on the blade surfaces at both operating points. This new inverse method is fully consistent with the viscous flow assumption and is implemented into the time accurate solution of the Reynolds-Averaged Navier-Stokes equations. An algebraic Baldwin-Lomax turbulence model is used for turbulence closure. The mixing plane approach is used to couple the stator and rotor regions. The dual-point inverse design method is then used to explore the effect of different choices of the pressure distributions on the suction surface of one or more rotor/stator on the blade/stage performance. The results show that single point inverse design resulted in a local performance improvement whereas the dual point design method allowed for improving the performance of both VKI-LS89 vane and E/TU-4 2.5 stage turbines over a wide range of operation.

Optimization of Microturbine Aerodynamics Using CFD, Inverse Design and FEM Structural Analysis: 1st Report — Compressor Design

2004 ◽  
Author(s):  
Kosuke Ashihara ◽  
Akira Goto ◽  
Shijie Guo ◽  
Hidenobu Okamoto
Keyword(s):  
High Speed ◽  
Structural Reliability ◽  
Design Method ◽  
Three Dimensional ◽  
Design Procedure ◽  
Inverse Design ◽  
Blade Profile ◽  
Vaned Diffuser ◽  
Performance Improvements ◽  
Inverse Design Method

In this paper, a new aerodynamic design procedure is presented for a centrifugal compressor stage of a microturbine system. To optimize the three-dimensional (3-D) flows and the performance, an inverse design method, which numerically generates the 3-D blade geometry for specified blade loading distribution, has been applied together with the numerical validation using CFD (Computational Fluid Dynamics) and FEM (Finite Element Method). The blade profile along the shroud surface of the impeller was optimized based on the 3-D inverse design and CFD. However, the blade profile towards the hub surface was modified geometrically to achieve a nearly radial blade element especially at the inducer part of the impeller, in order to meet the required structural strength. The modified impeller successfully kept similar aerodynamic performance as that of a blade with a fully 3-D shape, whilst showing improved structural reliability. So, the proposed method to adopt the blade profile designed by the inverse method along the shroud, and to geometrically modify the blade profile towards the hub, was confirmed to be effective to design a high-speed compressor impeller. The vaned diffuser has also been re-designed using the inverse design method. The corner separation in the conventional wedge-type diffuser channel was suppressed in the new design. The stage performance improvements were confirmed by stage calculations using CFD.

THE WING-BODY AEROELASTIC ANALYSES USING THE INVERSE DESIGN METHOD

2010 ◽  
Vol 24 (13) ◽  
pp. 1479-1482
Author(s):  
SEUNG JUN LEE ◽  
DONG-KYUN IM ◽  
IN LEE ◽  
JANG-HYUK KWON
Keyword(s):  
Design Method ◽  
The Body ◽  
Inverse Design ◽  
Navier Stokes ◽  
Full Potential ◽  
Small Disturbance ◽  
Body Effect ◽  
Flow Equations ◽  
Applicable Range ◽  
Inverse Design Method

Flutter phenomenon is one of the most dangerous problems in aeroelasticity. When it occurs, the aircraft structure can fail in a few second. In recent aeroelastic research, computational fluid dynamics (CFD) techniques become important means to predict the aeroelastic unstable responses accurately. Among various flow equations like Navier-Stokes, Euler, full potential and so forth, the transonic small disturbance (TSD) theory is widely recognized as one of the most efficient theories. However, the small disturbance assumption limits the applicable range of the TSD theory to the thin wings. For a missile which usually has small aspect ratio wings, the influence of body aerodynamics on the wing surface may be significant. Thus, the flutter stability including the body effect should be verified. In this research an inverse design method is used to complement the aerodynamic deficiency derived from the fuselage. MGM (modified Garabedian-McFadden) inverse design method is used to optimize the aerodynamic field of a full aircraft model. Furthermore, the present TSD aeroelastic analyses do not require the grid regeneration process. The MGM inverse design method converges faster than other conventional aerodynamic theories. Consequently, the inverse designed aeroelastic analyses show that the flutter stability has been lowered by the body effect.

Sign in / Sign up

Export Citation Format

Share Document