Theoretical predictions of structural electronic and optical properties of vanadium ferrite

2021 ◽  
pp. 2150387
Author(s):  
H. Bushra Munir ◽  
A. Afaq ◽  
Abu Bakar ◽  
Najm ul Aarifeen ◽  
Farid Ullah ◽  
...  
Keyword(s):  
Bulk Modulus ◽  
Lattice Constant ◽  
Density Functional ◽  
Theoretical Data ◽  
Cubic Phase ◽  
Temperature Sensitive ◽  
Electronic Density ◽  
Temperature Range ◽  
Theoretical Predictions ◽  
Conductivity Band

The structural properties of Vanadium Ferrite VFe2O4 are reported for temperature range 0–1000 K using Density Functional Theory. A comparative study with the available experimental and theoretical data in the literature is also presented. Effects of temperature on lattice constant, volume and bulk modulus are deduced that with the increase in temperature, bulk modulus decreases and lattice constant slightly increases. This proves that the material VFe2O4 remains in the same cubic phase for temperature range 0–1000 K. In addition, the optical response is observed with six optical constants like absorption, reflectivity, eloss, dielectric functions, refraction and optical conductivity. Band structures and electronic density of states are also computed by using TB-mBJ potential. We hope that our findings would provide a help to experimentalists in fabricating VFe2O4 for temperature-sensitive optical devices.

scholarly journals First-Principles Calculation of Conductivity of Ce-C Codoped SnO2 Contacts

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Can Ding ◽  
Zhenjiang Gao ◽  
Xing Hu ◽  
Zhao Yuan
Keyword(s):  
Charge Density ◽  
Lattice Constant ◽  
First Principles ◽  
Density Functional ◽  
Energy Levels ◽  
Circuit Breaker ◽  
Enthalpy Change ◽  
First Principles Calculation ◽  
Contact Material ◽  
Electronic Density

The contact is the core element of the vacuum interrupter of the mechanical DC circuit breaker. The electrical conductivity and welding resistance of the material directly affect its stability and reliability. AgSnO2 contact material has low resistivity, welding resistance, and so on. This material occupies an important position of the circuit breaker contact material. This research is based on the first-principles analysis method of density functional theory. The article calculated the lattice constant, enthalpy change, energy band, electronic density of state, charge density distribution, population, and conductivity of Ce, C single-doped, and Ce-C codoped SnO2 systems. The results show that Ce, C single doping, and Ce-C codoping all increase the cell volume and lattice constant. When the elements are codoped, the enthalpy change is the largest, and the thermal stability is the best. It has the smallest bandgap, the most impurity energy levels, and the least energy required for electronic transitions. The 4f orbital electrons of the Ce atom and the 2p orbital electrons of C are the sources of impurity energy near the Fermi level. When the elements are codoped, more impurity energy levels are generated at the bottom of the conduction band and the top of the valence band. Its bandgap is reduced so conductivity is improved. From the charge density and population analysis, the number of free electrons of Ce atoms and C atoms is redistributed after codoping. It forms a Ce-C covalent bond to further increase the degree of commonality of electrons and enhance the metallicity. The conductivity analysis shows that both single-doped and codoped conductivity have been improved. When the elements are codoped, the conductivity is the largest, and the conductivity is the best.

scholarly journals Pressure-induced phase transitions in Na2B12H12, structural investigation on a candidate for solid-state electrolyte

2019 ◽  
Vol 75 (3) ◽  
pp. 406-413 ◽  
Author(s):  
Romain Moury ◽  
Zbigniew Łodziana ◽  
Arndt Remhof ◽  
Léo Duchêne ◽  
Elsa Roedern ◽  
...  
Keyword(s):  
High Pressure ◽  
Solid State ◽  
Bulk Modulus ◽  
Density Functional ◽  
Ambient Pressure ◽  
Density Functional Theory Calculations ◽  
Ionic Conductors ◽  
Theoretical Predictions ◽  
Primary Order ◽  
The Stability

closo-Borates, such as Na2B12H12, are an emerging class of ionic conductors that show promising chemical, electrochemical and mechanical properties as electrolytes in all-solid-state batteries. Motivated by theoretical predictions, high-pressure in situ powder X-ray diffraction on Na2B12H12 was performed and two high-pressure phases are discovered. The first phase transition occurs at 0.5 GPa and it is persistent to ambient pressure, whereas the second transition takes place between 5.7 and 8.1 GPa and it is fully reversible. The mechanisms of the transitions by means of group theoretical analysis are unveiled. The primary-order parameters are identified and the stability at ambient pressure of the first polymorph is explained by density functional theory calculations. Finally, the parameters relevant to engineer and build an all-solid-state battery, namely, the bulk modulus and the coefficient of the thermal expansion are reported. The relatively low value of the bulk modulus for the first polymorph (14 GPa) indicates a soft material which allows accommodation of the volume change of the cathode during cycling.

The structures, phase transition and elastic and thermodynamic properties of ZnS from first-principles calculations

2021 ◽  
pp. 2150143
Author(s):  
Bo Li ◽  
Weiyi Ren
Keyword(s):  
Phase Transition ◽  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
First Principles ◽  
Density Functional ◽  
Mechanical Stability ◽  
Theoretical Data ◽  
Debye Model ◽  
Volume Curve ◽  
Temperature And Pressure

The phase transition of zinc sulfide (ZnS) from Zinc-blende (ZB) to a rocksalt (RS) structure and the elastic, thermodynamic properties of the two structures under high temperature and pressure are investigated by first-principles study based on the pseudo-potential plane-wave density functional theory (DFT) combined with the quasi-harmonic Debye model. The lattice constant [Formula: see text], bulk modulus [Formula: see text] and the pressure derivative of bulk modulus [Formula: see text]’ of the two structures are calculated. The results are in good agreement with experimental results and the other theoretical data. From the energy–volume curve, enthalpy equal principle and mechanical stability criterion, the transition pressures from the ZB to the RS structure are 16.83, 16.96 and 16.61 GPa, respectively. The three results and the experimental values 14.7–18.1, 16 GPa are very close to each other. Then the elastic properties are also calculated under the pressure ranging from 0 to 30 GPa. Finally, through the quasi-harmonic Debye model, the thermodynamic properties dependence of temperature and pressure in the ranges between 0–1600 K and 0–30 GPa are obtained successfully.

scholarly journals Ab-initio study of structural, elastic, electronic and thermodynamic properties of BaxSr1−xS ternary alloys

2015 ◽  
Vol 33 (4) ◽  
pp. 879-886 ◽  
Author(s):  
S. Chelli ◽  
S. Touam ◽  
L. Hamioud ◽  
H. Meradji ◽  
S. Ghemid ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
Lattice Constant ◽  
Theoretical Data ◽  
Calculated Phase Diagram ◽  
Enthalpy Of Mixing ◽  
Ternary Alloys ◽  
Miscibility Gap ◽  
Full Potential ◽  
Vegard’S Law

AbstractThe structural, elastic, electronic and thermodynamic properties of BaxSr1−xS ternary alloys have been investigated using the full-potential (linearized) augmented plane wave method. The ground state properties, such as lattice constant, bulk modulus and elastic constants, are in good agreement with numerous experimental and theoretical data. The dependence of the lattice parameters, bulk modulus and band gap on the composition x was analyzed. Deviation of the lattice constant from Vegard’s law and the bulk modulus from linear concentration dependence (LCD) was observed. The microscopic origins of the gap bowing were explained by using the approach of Zunger et al. The thermodynamic stability of BaxSr1−xS alloy was investigated by calculating the excess enthalpy of mixing, ΔHm and the calculated phase diagram showed a broad miscibility gap with a critical temperature.

Understanding The Nb-Ti-A1 System: First Principles Calculations

1994 ◽  
Vol 364 ◽  
Author(s):  
Michael J. Mehl
Keyword(s):  
High Temperature ◽  
Bulk Modulus ◽  
Total Energy ◽  
Crystal Structures ◽  
Lattice Constant ◽  
Density Of States ◽  
First Principles ◽  
First Principles Calculations ◽  
Electronic Density ◽  
Cubic Phases

AbstractThe discovery of ductile cubic phases in the Nb-Ti-Al system has led to increased study of these high-temperature intermetallics. I have performed first-principles calculations for ordered crystal structures in this system, paying particular attention to the Nb7Ti7Al2 structure. Somewhat surprisingly, the electronic density of states, lattice constant, and bulk modulus are nearly independent of the ordering of these materials, even though the changes in the total energy are significant.

STRUCTURAL, ELECTRONIC, THERMODYNAMIC AND THERMAL PROPERTIES OF ZINC-BLENDE InP, InAs AND THEIR InAsx P1-x TERNARY ALLOYS VIA FIRST PRINCIPLES CALCULATIONS

2013 ◽  
Vol 27 (27) ◽  
pp. 1350166 ◽  
Author(s):  
O. NEMIRI ◽  
S. GHEMID ◽  
Z. CHOUAHDA ◽  
H. MERADJI ◽  
F. EL HAJ HASSAN
Keyword(s):  
Thermal Properties ◽  
Bulk Modulus ◽  
Band Gap ◽  
Lattice Constant ◽  
First Principles ◽  
Density Functional ◽  
Experimental Studies ◽  
Ternary Alloys ◽  
Full Potential ◽  
First Principles Calculations

First-principles calculations are performed to study the structural, electronic, thermodynamic and thermal properties of the InP and InAs bulk materials and InAs x P 1-x ternary alloys using the full potential-linearized augmented plane wave method (FP-LAPW) within the density functional theory (DFT). The dependence of the lattice constant, bulk modulus, band gap, Debye temperature, heat capacity and mixing entropy on the composition x was analyzed. The lattice constant for InAs x P 1-x alloys exhibits a marginal deviation from the Vegard's law. A large deviation of the bulk modulus from linear concentration dependence (LCD) was observed for our alloys. We found that the composition dependence of the energy band gap is almost linear by using the mBJ and EV-GGA approximations. The microscopic origins of the gap bowing were explained and detailed by using the approach of Zunger and co-workers. Furthermore, the calculated phase diagram shows a miscibility gap for these alloys with a high critical temperature. Thermal effects on some macroscopic properties of InAs x P 1-x alloys are predicted using the quasi-harmonic Debye model, in which the phononic effects are considered. This is the first quantitative theoretical prediction of the thermal properties of the InAs x P 1-x alloys, and we still expect the confirmation of experimental studies.

The structure, elastic and thermodynamic properties of Ti2GaC from first-principles calculation

2019 ◽  
Vol 33 (06) ◽  
pp. 1950030 ◽  
Author(s):  
Xiao-Xia Pu ◽  
Xiao-Jiang Long ◽  
Lin Zhang ◽  
Jun Zhu
Keyword(s):  
Thermodynamic Properties ◽  
Elastic Constant ◽  
Bulk Modulus ◽  
Elastic Constants ◽  
First Principles ◽  
Density Functional ◽  
Mechanical Stability ◽  
Theoretical Data ◽  
Debye Model ◽  
First Principles Calculation

In this work, the structure, elastic and thermodynamic properties of Ti2GaC at high pressure (P) and high-temperature (T) are studied based on the density functional first-principles. The lattice parameters and elastic constants are well consistent with some theoretical data and experimental results. The elastic constant of Ti2GaC increase monotonously with the increase of pressure (P), which demonstrates the mechanical stability of Ti2GaC at the pressure (P) from 0 to 200 GPa. Mechanical properties including Poisson’s ratio ([Formula: see text]), Young’s modulus (E), shear modulus (G) and bulk modulus (B), which are obtained from elastic constants C[Formula: see text]. The ratio B/G value shows that Ti2GaC is a brittle material, but its enhancing ductility significantly with the elevate of pressure (P). The Grüneisen parameters ([Formula: see text]), thermal expansion coefficient ([Formula: see text]), heat capacity (C[Formula: see text]), elastic constant (C[Formula: see text]), bulk modulus (B), energy (E) and volume (V) with the change of temperature (T) or pressure (P) are calculated within the quasi-harmonic Debye model for pressure (P) and temperatures (T) range in 1600 K and 100 GPa. Besides, densities of states and energy band are also obtained and analyzed in comparison with available theoretical data.

Theoretical Calculations of Mechanical, Electronic, and Chemical Bonding in CaN2, SrN2, and BaN2

2014 ◽  
Vol 69 (12) ◽  
pp. 619-628 ◽  
Author(s):  
Li-Qin Zhang ◽  
Yan Cheng ◽  
Zhen-Wei Niu ◽  
Chang-Ge Piao ◽  
Guang-Fu Ji
Keyword(s):  
Bulk Modulus ◽  
Bond Length ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Applied Pressure ◽  
Theoretical Data ◽  
High Hardness ◽  
Mechanical Instability ◽  
Spin Polarized ◽  
The Impact

AbstractWe present a first-principles density functional theory-based study about the impact of pressure on the structural and elastic properties of bulk CaN2, SrN2, and BaN2. Non-spin and spin polarized calculations indicate that the non-spin polarized ground state was more favourable with magnetic moments of 1.049 μB, 1.059 μB, and 1.014 μB for CaN2, SrN2, and BaN2, respectively, and these were in good agreement with previous experimental and theoretical data. The high bulk modulus of CaN2, SrN2, and BaN2 confirm that those compounds have low compressibility and high hardness. The obtained bulk modulus, N-N bond length, and optimized structure parameters are similar to those from previous studies.With an increase in applied pressure the independent elastic constants of CaN2, SrN2, and BaN2 indicated the presence of mechanical instability at 20, 15, and 10 GPa, which is possibly related to phase transitions in addition to a decrease in N-N bond length.

scholarly journals Structural, Electronic, Lattice Dynamic, and Elastic Properties of SnTiO3 and PbTiO3 Using Density Functional Theory

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Shiferaw Kuma ◽  
Menberu Mengesha Woldemariam
Keyword(s):  
Bulk Modulus ◽  
Elastic Properties ◽  
Density Of States ◽  
Elastic Constants ◽  
Density Functional ◽  
Phonon Dispersion ◽  
Electronic Band Structure ◽  
Theoretical Data ◽  
Modern Theory ◽  
Electronic Band

The structural, electronic, and elastic properties of tetragonal phase of SnTiO3 and PbTiO3 are investigated using first principle calculations. The unknown exchange-correlation functional is approximated with generalized gradient approximation (GGA) as implemented in pseudopotential plane wave approach. The convergence test of total energy with respect to energy cutoff and k-point sampling is preformed to ensure the accuracy of the calculations. The structural properties such as equilibrium lattice constant, equilibrium unit cell volume, bulk modulus, and its derivative are in reasonable agreement with the previous experimental and theoretical works. From elastic constants, mechanical parameters such as anisotropy factor A, shear modulus G, bulk modulus B, Young’s modulus E, and Poison’s ratio n are determined by using Voigt–Reuss–Hill average approximation. In addition, Debye temperature and longitudinal and transversal sound velocities are predicted from elastic constants. The electronic band structure and density of states of both compounds are obtained and compared with the available experimental as well as theoretical data. Born effective charge (BEC), phonon dispersion curve, and density of states are computed from functional perturbation theory (DFPT). Lastly, the spontaneous polarization is determined from the modern theory of polarization, and they are in agreement with the previous findings.

FIRST PRINCIPLES CALCULATIONS OF STRUCTURAL, ELECTRONIC, THERMODYNAMIC AND THERMAL PROPERTIES OF BaxSr1-xTe TERNARY ALLOYS

2014 ◽  
Vol 28 (04) ◽  
pp. 1450041
Author(s):  
S. CHELLI ◽  
H. MERADJI ◽  
S. AMARA KORBA ◽  
S. GHEMID ◽  
F. EL HAJ HASSAN
Keyword(s):  
Thermal Properties ◽  
Bulk Modulus ◽  
Band Gap ◽  
Lattice Constant ◽  
Density Functional ◽  
Enthalpy Of Mixing ◽  
Mixed Crystals ◽  
Ternary Alloys ◽  
Full Potential ◽  
Generalized Gradient

The structural, electronic thermodynamic and thermal properties of Ba x Sr 1-x Te ternary mixed crystals have been studied using the ab initio full-potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT). In this approach, the Perdew–Burke–Ernzerhof-generalized gradient approximation (PBE-GGA) was used for the exchange-correlation potential. Moreover, the recently proposed modified Becke Johnson (mBJ) potential approximation, which successfully corrects the band-gap problem was also used for band structure calculations. The ground-state properties are determined for the cubic bulk materials BaTe , SrTe and their mixed crystals at various concentrations (x = 0.25, 0.5 and 0.75). The effect of composition on lattice constant, bulk modulus and band gap was analyzed. Deviation of the lattice constant from Vegard's law and the bulk modulus from linear concentration dependence (LCD) were observed for the ternary Ba x Sr 1-x Te alloys. The microscopic origins of the gap bowing were explained by using the approach of Zunger and co-workers. On the other hand, the thermodynamic stability of these alloys was investigated by calculating the excess enthalpy of mixing, ΔHm as well as the phase diagram. It was shown that these alloys are stable at high temperature. Thermal effects on some macroscopic properties of Ba x Sr 1-x Te alloys were investigated using the quasi-harmonic Debye model, in which the phononic effects are considered.

Sign in / Sign up

Export Citation Format

Share Document