Influence of Substrate Miscut on the Island Formation Process in In0.2Ga0.8As/GaAs Multilayers

2003 ◽  
Vol 10 (02n03) ◽  
pp. 263-270
Author(s):  
E. Gartstein ◽  
D. Mogilyanski ◽  
D. Barlam
Keyword(s):  
Strain Relaxation ◽  
Relaxation Processes ◽  
X Ray Diffraction ◽  
Element Analysis ◽  
Island Nucleation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Initial Substrate ◽  
Influence Of Substrate

LPOMVPE-grown In0.2Ga0.8As/GaAs multilayers on GaAs substrates with miscut values of 0°, 0.3° and 2° around the [100] azimuthal direction were investigated by employing X-ray diffraction techniques complemented by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The step-terrace structure evolving on the interfaces upon deposition strongly depends on the initial substrate morphology. The initiation of island nucleation, and both lateral and vertical ordering are related to the interfacial morphological parameters. Finite element analysis (FEA) is performed to elucidate the interplay between structural and strain relaxation processes.

Strain Relaxation During Heteroepitaxy on Twist-Bonded Thin Gallium Arsenide Substrates

1998 ◽  
Vol 535 ◽  
Author(s):  
P. Kopperschmidt ◽  
S T. Senz ◽  
R. Scholz ◽  
G. Kästner ◽  
U. Gösele ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Strain Relaxation ◽  
Twist Angle ◽  
Gaas Layer ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Compliant Substrates ◽  
Atomic Force ◽  
Transmission Electron ◽  
Epitaxial Deposition

AbstractWe realized “compliant” substrates in the square centimeter range by twist-wafer bonding of an (100) GaAs handle wafer to another (100) GaAs wafer with a several nm thick epitaxially grown GaAs layer followed by an appropriate back-etch procedure. The twist angle between the two GaAs wafers was chosen between 4 and 15 degrees. The twisted layers were characterized by area scanned X-ray diffraction, optical and electron microscopy and atomic force microscopy. Occasionally we observed regions showing pinholes in the transferred thin twistbonded GaAs layer.After epitaxial deposition of 300 nm InP and InGaAs films with different degrees of mismatch on these substrates, transmission electron microscopy revealed grains which are epitaxially oriented to either the substrate or the twist-bonded layer. The grain boundaries between the twisted and untwisted grains probably collect threading dislocations, thus reducing their density in the areas free of boundaries.

PLD Grown 3C-SiC Thin Films on Si: Morphology and Structure

2015 ◽  
Vol 821-823 ◽  
pp. 213-216
Author(s):  
S.M. Ryndya ◽  
N.I. Kargin ◽  
A.S. Gusev ◽  
E.P. Pavlova
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Rutherford Backscattering Spectrometry ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Selected Area Electron Diffraction ◽  
Atomic Force ◽  
Transmission Electron ◽  
Influence Of Substrate ◽  
Composition Structure

Silicon carbide thin films were obtained on Si (100) and (111) substrates by means of vacuum laser ablation of α-SiC ceramic target. The influence of substrate temperature on composition, structure and surface morphology of experimental samples was examined using Rutherford backscattering spectrometry (RBS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), conventional and high-resolution transmission electron microscopy (TEM/HRTEM), atomic force microscopy (AFM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) methods.

Optical Properties and Defect Structure of MOVPE InGaN Films

1999 ◽  
Vol 588 ◽  
Author(s):  
A. Cremades ◽  
M. Albrecht ◽  
J. M. Ulloa ◽  
J. Piqueras ◽  
H. P. Strunk ◽  
...  
Keyword(s):  
Optical Properties ◽  
Strain Relaxation ◽  
Misfit Dislocations ◽  
Nonradiative Recombination ◽  
X Ray Diffraction ◽  
Band Bending ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Piezoelectric Fields

AbstractA series of 100 nm thick InGaN films with In content up to 14% has been grown by MOVPE on SiC substrates. Optical characterization was carried out by means of reflectance spectrometry, photoluminescence and cathodoluminescence. Optical properties of the samples have been correlated with the microstructural properties measured by atomic force microscopy, transmission electron microscopy and X-ray diffraction data. Results indicate a dependence of the optical properties on the In content in the sample, as well as on the residual stress in the films induced by Indium incorporation. Part of the strain is reduced elastically by formation of pinholes which reach the InGaN/GaN interface, where first misfit dislocations are observed to form. Our results show that luminescence is directly correlated with the strain distribution in the layers. Pinholes are observed to act as nonradiative recombination sites for carriers, while strain relaxation around pinholes may enhance luminescence emission. We discuss the influence of strain with respect to In incorporation, the appearance of piezoelectric fields and effects due to strain induced band bending.

Structural and Optical Properties of InAsSbBi Grown by Molecular Beam Epitaxy on Offcut GaSb Substrates

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 215
Author(s):  
Rajeev R. Kosireddy ◽  
Stephen T. Schaefer ◽  
Marko S. Milosavljevic ◽  
Shane R. Johnson
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Optical Quality ◽  
X Ray Diffraction ◽  
Interface Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Lateral Variations

Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction, Nomarski optical microscopy, atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The InAsSbBi layers are 210 nm thick, coherently strained, and show no observable defects. The substrate offcut is not observed to influence the structural and interface quality of the samples. Each sample exhibits small lateral variations in the Bi mole fraction, with the largest variation observed in the on-axis growth. Bismuth rich surface droplet features are observed on all samples. The surface droplets are isotropic on the on-axis sample and elongated along the [011¯] step edges on the 1° and 4° offcut samples. No significant change in optical quality with offcut angle is observed.

Epitaxial BaTiO3 Thin Films on Different Substrates for Optical Waveguide Applications

1999 ◽  
Vol 597 ◽  
Author(s):  
M. Siegert ◽  
Judit G. Lisoni ◽  
C. H. Lei ◽  
A. Eckau ◽  
W. Zander ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Waveguides ◽  
Rutherford Backscattering Spectrometry ◽  
Optical Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Ion Channeling ◽  
Atomic Force ◽  
Transmission Electron

AbstractIn the process of developing thin film electro-optical waveguides we investigated the influence of different substrates on the optical and structural properties of epitaxial BaTiO3 thin films. These films are grown by on-axis pulsed laser deposition (PLD) on MgO(100), MgAl2O4(100), SrTiO3(100) and MgO buffered A12O3(1102) substrates. The waveguide losses and the refractive indices were measured with a prism coupling setup. The optical data are correlated to the results of Rutherford backscattering spectrometry/ion channeling (RBS/C). X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). BaTiO3 films on MgO(100) substrates show planar waveguide losses of 3 dB/cm and ridge waveguide losses of 5 dB/cm at a wavelength of 633 nm.

(G03 Best Paper Award Winner) Analysis of Sn Behavior During Ni/GeSn Solid-State Reaction by Correlated X-ray Diffraction, Atomic Force Microscopy, and Ex-situ/In-situ Transmission Electron Microscopy

2020 ◽  
Vol MA2020-02 (24) ◽  
pp. 1750-1750
Author(s):  
Andrea Quintero Colmenares ◽  
Patrice Gergaud ◽  
Jean-Michel Hartmann ◽  
Vincent Delaye ◽  
Nicolas Bernier ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Ex Situ ◽  
Paper Award ◽  
X Ray Diffraction ◽  
Award Winner ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

Evaluation of the Strain Field Inside and Around Growth Islands by Means of X-Ray Diffuse Scattering

1999 ◽  
Vol 583 ◽  
Author(s):  
Martin Schmidbauer ◽  
Thomas Wiebach ◽  
Helmut Raidt ◽  
Peter Schäfer ◽  
Michael hanke ◽  
...  
Keyword(s):  
Strain Field ◽  
Reciprocal Space ◽  
X Ray Diffraction ◽  
Abrupt Increase ◽  
X Ray ◽  
Force Microscopy ◽  
Self Organized ◽  
Atomic Force ◽  
Transmission Electron ◽  
Highly Strained

AbstractThe strain distribution inside and in the vicinity of coherently strained self-organized islands has been investigated by high-resolution x-ray diffraction (HRXRD). Finite element method (FEM) calculations were carried out in order to calculate the strain field, which was then used to simulate x-ray reciprocal space maps on the basis of kinematical scattering theory. For Si0 75Ge0.25 islands an abrupt increase in the Ge-concentration at about one third of the island height has been found. This behavior can be attributed to different nucleation stages during growth. Highly strained buried CdSe quantum dots (QDs) strongly influence the surrounding ZnSe matrix. From reciprocal space maps and FEM simulations we were able to estimate the shape and size of the islands. The results are in agreement with transmission electron microscopy (TEM) and UHV atomic force microscopy (AFM) data.

Epitaxial Growth and Characterization of the Ordered Vacancy Compound CuIn3Se5 on GaAs (100) Fabricated by Molecular Beam Epitaxy

1994 ◽  
Vol 340 ◽  
Author(s):  
Art J. Nelson ◽  
M. Bode ◽  
G. Horner ◽  
K. Sinha ◽  
John Moreland
Keyword(s):  
Molecular Beam Epitaxy ◽  
Epitaxial Growth ◽  
Molecular Beam ◽  
Structural Defects ◽  
X Ray Diffraction ◽  
Symmetric Vibration ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

ABSTRACTEpitaxial growth of the ordered vacancy compound (OVC) CuIn3Se5 has been achieved on GaAs (100) by molecular beam epitaxy (MBE) from Cu2Se and In2Se3 sources. Electron probe microanalysis and X-ray diffraction have confirmed the composition for the 1-3-5 OVC phase and that the film is single crystal Culn3Se5 (100). Transmission electron microscopy (TEM) characterization of the material also showed it to be single crystalline. Structural defects in the layer consisted mainly of stacking faults. Photoluminescence (PL) measurements performed at 7.5 K indicate that the bandgap is 1.28 eV. Raman spectra reveal a strong polarized peak at 152 cm−1, which is believed to arise from the totally symmetric vibration of the Se atoms in the lattice. Atomic force microscopy reveals faceting in a preferred (100) orientation.

scholarly journals Effects of Size and Dispersity of Microcrystalline Celluloses on Size, Structure and Stability of Nanocrystalline Celluloses Extracted by Acid Hydrolysis

Nano LIFE ◽  
2014 ◽  
Vol 04 (04) ◽  
pp. 1441014 ◽  
Author(s):  
Qi Liu ◽  
Weiping Hao ◽  
Yongguang Yang ◽  
Aurore Richel ◽  
Canbin Ouyang ◽  
...  
Keyword(s):  
Particle Size ◽  
Acid Hydrolysis ◽  
Size Structure ◽  
Particle Sizes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Sonication Treatment

Nanocrystalline celluloses (NCCs) were separated from four commercial microcrystalline celluloses (MCCs) by an acid hydrolysis–sonication treatment. Transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectrum, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were conducted to investigate the NCCs. MCCs with different morphologies and particle sizes showed different aggregation degrees. The aggregation of MCCs followed the order MCC1 > MCC3 > MCC2 > MCC4, which is the same order of the heights of the resulting NCCs. The best uniformity and thermal stability were characterized for NCC3, which was produced by MCC3 with smallest original particle size and good dispersity among the four MCCs. This result suggests that both the original particle size and dispersity of MCCs had significant effects on separated NCCs.

Sign in / Sign up

Export Citation Format

Share Document