Research News

2003 ◽  
Vol 07 (10) ◽  
pp. 505-509

Green Mud to Cleanse Oil and Gas Environment. Rare Chromosome Abnormality. Major Breakthrough in “Super Rice” Research. Anti-Cancer Factor Identified in Goose Blood. LV Prasad Eye Institute Developing Reusable DNA Chip for Eye. Experts Discover Possible Commercial Use for Panda Dung. Japanese Researchers Discover New Vitamin. Yokohama Discovers Novel Method of Storing DNA onto Paper. Malaysian AIDS Herbal Formula Shows Promise. Taiwan Develops Anti-Virus Masks.

Author(s):  
Qi Guoquan ◽  
Yan Hongxia ◽  
Qi Dongtao ◽  
Li Houbu ◽  
Kong Lushi ◽  
...  

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5140
Author(s):  
Zhipeng Li ◽  
Tong Wu ◽  
Wei Zhang ◽  
Xuyang Gao ◽  
Zhenqiu Yao ◽  
...  

An ultrasonic sensors system is commonly used to measure the wall thickness of buried pipelines in the transportation of oil and gas. The key of the system is to precisely measure time-of-flight difference (TOFD) produced by the reflection of ultrasonic on the inner and outer surfaces of the pipelines. In this paper, based on deep learning, a novel method termed Wave-Transform Network is proposed to tackle the issues. The network consists of two parts: part 1 is designed to separate the potential overlapping ultrasonic echo signals generated from two surfaces, and part 2 is utilized to divide the sample points of each signal into two types corresponding to before and after the arrival time of ultrasonic echo, which can determine the time-of-flight (TOF) of each signal and calculate the thickness of pipelines. Numerical simulation and actual experiments are carried out, and the results show satisfactory performances.


Author(s):  
Matteo Bertoneri ◽  
Melissa Wilcox ◽  
Lorenzo Toni ◽  
Griffin Beck

As the oil and gas industry addresses technology challenges for accessing gas reserves and enhancing the production of existing installations, wet gas compression becomes an important technology focus. When liquid is introduced into a compressor flow stream, the performance of the compressor is significantly influenced. Therefore, a concentrated effort is required to develop the tools to adequately predict the performance of the compressor when subjected to wet gas conditions. A series of tests were performed on a single stage compressor in a wet gas environment in order to provide empirical data for understanding how to predict wet gas performance. The compressor underwent aerodynamic, erosion, and rotordynamic performance testing. The tests were completed with a mixture of air and water at suction pressures of 10, 15, and 18.5 bar. The compressor was subjected to a multiphase flow with liquid volume fractions ranging from 0 to 3% (corresponding to a mass fraction of 73%) at three Mach numbers. Transient tests with liquid load variation were also done. This paper describes the test stand that was developed and operated for testing of the compressor in a wet gas environment. This includes a review of the overall test set-up, description of key test components and of the instrumentation installed on the compressor and the test loop. An overview of main test results is eventually shown.


2006 ◽  
Vol 915 ◽  
Author(s):  
Hak-Rin Kim ◽  
Min-Geon Choi ◽  
Joo-Eun Kim ◽  
Eui-Yul Choi ◽  
Sang-Wook Oh ◽  
...  

AbstractTo detect biological events, biosensors require a transducer part where specific biomolecular binding events at a bioreceptor part is converted to measurable quantitative signals. Currently, most of biosensors adopt a fluorescent or radioactive probing technique as a transducer. However, such approaches require expensive and sophisticated analysis procedures with laboratory-based equipment.In this work, we propose a novel method for optically detecting hybridization results in a deoxyribonucleic acid (DNA) chip using an anchoring transition of liquid crystal (LC) alignment. To investigate the effects of structural changes of DNA on the LC alignment, we used a functional substrate on which single-stranded oligonucleotide DNA (ssDNA) was selectively immobilized to a Biotin Chip substrate. In our experiment, we used a 19-mer oligoDNA or p53 tumor suppressor as a bioreceptor and its complementary partner oligoDNA as a target material.Before hybridization, surface nematic LC (NLC) molecules on the immobilized ssDNAs are homeotropically aligned by a steric interaction between the freely penetrated NLC molecules and the ssDNA. After hybridization, the penetration of the NLC molecules is hindered by the double strand DNA (dsDNA) due to their increased packing density. Such an interface condition makes the surface ordering of the NLC molecules very weak, as a result, the NLC in the bulk has a planar inhomogeneous orientation. Although hybridization events of the DNA and the subsequent molecular interaction between the immobilized DNA and the NLC molecules takes place within a layer whose thickness is in the tens of nm, such binding events can be communicated to the NLC bulk beyond a distance of tens of μm though the long-range elastic deformation of the NLC molecules. Thus, the hybridization event is converted to amplified optical signals via birefringent nature of the NLC between crossed polarizers. Our NLC-based DNA chip array showed that the extinction ratio of transmitted light depending on the hybridization results was approximately four, which could be read by the naked eye. Since such anchoring behaviors on the immobilized DNA are very similar to those on the conventional amphiphilic homeotropic surfactant of LCs, it is expected that quantitative analysis of hybridization events can be explored with our simple system.


2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Qingshan Feng ◽  
Rui Li ◽  
Hong Zhang

The bending strain of long-distance oil and gas pipelines can be calculated by the in-line inspection tool which used inertial measurement unit (IMU). The bending strain is used to evaluate the strain and displacement of the pipeline. During the bending strain inspection, the dent existing in the pipeline can affect the bending strain data as well. This paper presents a novel method to model and calculate the pipeline dent based on the bending strain. The technique takes inertial mapping data from in-line inspection and calculates depth of dent in the pipeline using Bayesian statistical theory and neural network. To verify accuracy of the proposed method, an in-line inspection tool is used to inspect pipeline to gather data. The calculation of dent shows the method is accurate for the dent, and the mean relative error is 2.44%. The new method provides not only strain of the pipeline dent but also the depth of dent. It is more benefit for integrity management of pipeline for the safety of the pipeline.


2021 ◽  
Author(s):  
Hind S. Dossary ◽  
Fahd I. Alghunaimi ◽  
Young C. Choi

Abstract Produced water is considered one of the largest by volume waste streams and one of the most challenging effluents in the oil and gas industry. This is due to the variety of contaminants that make up produce water. A variety of treatment methods have been studied and implemented. These methods aim to reduce the hydrocarbon content and the number of contaminants in produced water to meet the disposal, reuse, and environmental regulations. These contaminants can include dispersed oil droplets, suspended solids, dissolved solids, heavy metals, and other production chemicals. Some of those contaminates have value and can be a commodity in different applications such as bromine (Br). Bromine ions can be used to form calcium bromide, which is considered one of the most effective drilling agents and is used extensively in drilling and completion operations. This paper aims to highlight the utilization and the new extraction method of bromide ions from produced water to form calcium bromide (CaBr2). The conventional preparation of calcium-bromide drilling and completion fluids involves adding solid calcium-bromide salts to the water, which can be relatively expensive. Another method can involve the handling of strong oxidants and toxic gas to form solid calcium bromide. The novel method outlined in this paper is a cost-effective and environmentally friendly way of generating calcium bromide from produced water. The method includes processing the produced water to recover bromide ions. This is done by first passing the produced water through a resin bed, including bromine-specific ion exchange resin, where the bromide ions will adsorb/absorb onto the resin, as shown in Figure-1. The second step involves regenerating the resin with regenerant having calcium cations and water to form calcium bromide. The final stage is generating the calcium bromide in the water from the bed of resin by introducing concentrated CaCl2, forming a concentrated solution of water and calcium bromide. The developed solution will be further processed to give drilling and completion fluids. This novel method constitutes a good example of produced water utilization in different applications to minimize waste and reduce the costs of forming highly consumable materials.


2020 ◽  
Author(s):  
Eugenia O’Kelly ◽  
Anmol Arora ◽  
Corinne O’Kelly ◽  
Charlotte Pearson ◽  
James Ward ◽  
...  

Abstract The COVID-19 pandemic has led to a surge in the design and production of fabric face coverings. There are few published methods which enable mask designers, makers and purchasers to assess the relative filtration ability of mask making materials. Those methods which do exist are prohibitively expensive and difficult to conduct. As a result, mask makers, non-profits, and small-scale designers face difficult decisions when designing face coverings for personal and commercial use. In this paper, we propose a novel method, the Qualitative Filtration Efficiency Assessment (QFEA), for easily and inexpensively comparing the filtration efficiency of common materials. This method provides a highly affordable and readily available way to assess potential mask materials.


2018 ◽  
Vol 13 (1) ◽  
Author(s):  
Grace Gar-Lee Yue ◽  
Julia Kin-Ming Lee ◽  
Ben Chung-Lap Chan ◽  
Hin-Fai Kwok ◽  
Sandy Wan-Heng Hoi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document