Laccase Biosensor Based on Ag-Doped TiO2 Nanoparticles on CuCNFs for the Determination of Hydroquinone

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650132 ◽  
Author(s):  
Jie Yang ◽  
Dawei Li ◽  
Zengyuan Pang ◽  
Qufu Wei
Keyword(s):  
Electron Microscopy ◽  
Storage Stability ◽  
Electrochemical Impedance ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
New Material ◽  
And Storage

A novel nanomaterial composed of copper and carbon nanofibers (CuCNFs) decorated with Ag-doped TiO2 (Ag–TiO[Formula: see text] nanoparticles was prepared through electrospinning, carbonization and solvothermal treatment. The composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The obtained composites were mixed with laccase and Nafion to construct novel hydroquinone biosensor. The electrochemical behavior of the novel biosensor was studied using cyclic voltammetry (CV) and chronoamperometry. The results demonstrated that the biosensor possessed a wide detection linear range (1.20–176.50[Formula: see text][Formula: see text]M), a good selectivity, repeatability, reproducibility and storage stability. This work provides a new material to design more efficient laccase (Lac) based biosensor for hydroquinone detection.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

scholarly journals Luminescence Studies and Judd–Ofelt Analysis on SiO2@LaPO4:Eu@SiO2 Submicro-spheres with Different Size of Intermediate Shells

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaowei Zhu ◽  
Kuisuo Yang ◽  
Anping Wu ◽  
He Bai ◽  
Jinrong Bao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Optical Transition ◽  
Dipole Transition ◽  
Rare Earth Ions ◽  
Photoluminescence Intensity ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Abstract The novel submicro-spheres SiO2@LaPO4:Eu@SiO2 with core-shell-shell structures were prepared by connecting the SiO2 submicro-spheres and the rare earth ions through an organosilane HOOCC6H4N(CONH(CH2)3Si(OCH2CH3)3 (MABA-Si). The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (IR). It is found that the intermediate shell of the submicro-spheres was composed by LaPO4:Eu nanoparticles with the size of about 4, 5–7, or 15–34 nm. A possible formation mechanism for the SiO2@LaPO4:Eu@SiO2 submicro-spheres has been proposed. The dependence of the photoluminescence intensity on the size of the LaPO4:Eu nanoparticles has been investigated. The intensity ratios of electrical dipole transition 5D0 → 7F2 to magnetic dipole transition 5D0 → 7F1 of Eu3+ ions were increased with decreasing the size of LaPO4:Eu nanoparticles. According to the Judd-Ofelt (J-O) theory, when the size of LaPO4:Eu nanoparticles was about 4, 5–7 and 15–34 nm, the calculated J-O parameter Ω2 (optical transition intensity parameter) was 2.30 × 10−20, 1.80 × 10−20 and 1.20 × 10−20, respectively. The increase of Ω2 indicates that the symmetry of Eu3+ in the LaPO4 lattice was gradually reduced. The photoluminescence intensity of the SiO2@LaPO4:Eu@SiO2 submicro-spheres was unquenched in aqueous solution even after 15 days.

Fabrication of boron carbonitride (BCN) nanotubes and giant fullerene cages

2010 ◽  
Vol 88 (12) ◽  
pp. 1256-1261 ◽  
Author(s):  
Guifang Sun ◽  
Faming Gao ◽  
Li Hou
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
The Novel ◽  
X Ray Diffraction ◽  
Boron Carbonitride ◽  
X Ray ◽  
Transmission Electron ◽  
New Form ◽  
First Time ◽  
Electron Energy Loss

Boron carbonitride (BCN) nanotubes have been successfully prepared using NH4Cl, KBH4, and ZnBr2 as the reactants at 480 °C for 12 h by a new benzene-thermal approach in a N2 atmosphere. As its by-product, a new form of carbon regular hexagonal nanocages are observed. The samples are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), transmission electron diffraction (TED), electron energy loss spectroscopy (EELS), and high-resolution transmission electron microscopy (HRTEM). The prepared nanotubes have uniform outer diameters in the range of 150 to 500 nm and a length of up to several micrometerss. The novel carbon hexagonal nanocages have a typical size ranging from 100 nm to 1.5 µm, which could be the giant fullerene cages of [Formula: see text] (N = 17∼148). So, high fullerenes are observed for the first time. The influences of reaction temperature and ZnBr2 on products and the formation mechanism of BCN nanotubes are discussed.

CuWO4 Nanoparticles: Investigation of Dielectric, Electrochemical Behaviour and Photodegradation of Pharmaceutical Waste

2019 ◽  
Vol 19 (11) ◽  
pp. 7026-7034 ◽  
Author(s):  
M. Thiruppathi ◽  
M. Vahini ◽  
P. Devendran ◽  
M. Arunpandian ◽  
K. Selvakumar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Electrochemical Impedance ◽  
Electrochemical Behaviour ◽  
Diclofenac Sodium ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Transmission Electron ◽  
Pharmaceutical Waste

The hydrothermally synthesized CuWO4 nanoparticles (NPs) were characterized with different analysis such as X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM), Energy Dispersive X-ray Spectroscopy (EDX), Cyclic Voltammetry (CV), UV-Visible and Photoluminescence (PL) analysis. The prepared CuWO4 NPs were examined with Electrochemical Impedance Spectroscopy (EIS). SEM images show that CuWO4 NPs are highly spherical shaped morphology and porous in nature. The optical band gap of prepared CuWO4 NPs is found to be 2.12 eV. Photodegradation of diclofenac sodium (DFS) (medical waste) in the aqueous medium with CuWO4 NPs under visible light irradiation shows 98% degradation. The CuWO4 NPs was stable up to 5th cycle it can be used as a reusable photocatalyst for the DFS degradation. The electrical conductivity and dielectric properties of the CuWO4 NPs at room temperature is analyzed by EIS studies. The bulk conductivity value of the prepared nanoparticles is 1.477×10-5 S/cm at room temperature. The conductivity of CuWO4 NPs is found to be due to electrons movement. The CuWO4 NPs shows higher photocatalytic and electrocatalytic activity for decomposition of DFS and methanol electro-oxidation in alkaline medium respectively.

Estimation of Quartz in Small Biological Specimens with Transmission Electron Microscopy at 100 KV

1974 ◽  
Vol 32 ◽  
pp. 70-71
Author(s):  
Glenn R. Smith ◽  
Krishna Seshan ◽  
Jerome J. Wesolowski ◽  
Axel G. Berner
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mass Concentration ◽  
Oxygen Plasma ◽  
Human Lung ◽  
X Ray Diffraction ◽  
X Ray ◽  
Biopsy Specimens ◽  
Transmission Electron

Determination of the mass concentration of quartz in small biopsy specimens for clinical diagnostic purposes often cannot be performed by x-ray diffraction and light microscopy. A technique utilizing transmission electron microscopy (TEM) was used to determine the quartz concentration in a human lung specimen taken from a patient suspected of having silicosis.The sample was prepared for examination by low temperature incineration in an oxygen plasma. The inorganic residue was suspended in 0.5 percent Parlodion in amyl acetate. Grids were coated with the sample suspension and subsequently shadowed with a thin film of carbon. Standard quartz particles were prepared in a similar manner.

Zn-rich smectite from the Silver Coin Mine, Nevada, USA

Clay Minerals ◽  
2015 ◽  
Vol 50 (4) ◽  
pp. 417-430 ◽  
Author(s):  
S. Kaufhold ◽  
G. Färber ◽  
R. Dohrmann ◽  
K. Ufer ◽  
G. Grathoff
Keyword(s):  
Electron Microscopy ◽  
Ir Spectroscopy ◽  
Fine Fraction ◽  
Structural Formula ◽  
X Ray Diffraction ◽  
Geochemical Environment ◽  
X Ray ◽  
Silver Coin ◽  
Transmission Electron

AbstractMore than 100 minerals have been reported from the Silver Coin Mine, Nevada USA; five new minerals have been discovered here, due to the unusual geochemical environment. The present study reports on the investigation of a greenish clayey sample from the Silver Coin Mine. After the separation of a fine fraction to enrich the clay minerals, sauconite, a rare Zn-rich smectite, was found by X-ray diffraction (XRD) and was further characterized by differential thermal analysis (DTA), infrared (IR) spectroscopy and scanning electron microscopy (SEM). The Zn-rich smectite is accompanied by illite, minor kaolinite/halloysite and traces of gibbsite (as was indicated by the IR spectroscopy). The occurrence indicates an acidic environment probably caused by oxidation of sulfides.The determination of the structural formula, to further characterize the Zn-rich smectite, was difficult because of the multi-clay mineral assembly. However, different SEM-EDX (energy dispersive X-ray) approaches as well as transmission electron microscopy (TEM)-EDX analysis helped to characterize the smectite as Al-rich sauconite with some exchangeable K+.

scholarly journals One-pot synthesis of cellulose/MoS2 composite for efficient visible-light photocatalytic reduction of Cr(VI)

BioResources ◽  
2019 ◽  
Vol 14 (3) ◽  
pp. 6114-6133
Author(s):  
Chunxiang Lin ◽  
Yushi Liu ◽  
Qiaoquan Su ◽  
Yifan Liu ◽  
Yuancai Lv ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Impedance ◽  
Photocatalytic Reduction ◽  
X Ray Diffraction ◽  
One Pot ◽  
Simultaneous Reduction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduction Efficiency ◽  
Hole Scavenger

An effective cellulose/MoS2 (Ce/MoS2) composite was synthesized via a one-pot microwave-assisted ionic liquid method for the photocatalytic reduction of toxic Cr(VI). Effects of ionic liquids (ILs) on the MoS2 nanostructure were considered, and the obtained composite was characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectrometry (XPS), and electrochemical impedance spectroscopy (EIS). The results indicated that the MoS2 nanoplates were anchored and dispersed on the surface of the cellulose. Compared with the pristine MoS2, the support of the cellulose greatly enhanced the photocatalytic reduction efficiency of Cr(VI) ions in solution, from 65.9% to nearly 100%. The reduction mechanism was considered, and the results implied that the simultaneous reduction of Cr(VI) during the initial dark adsorption process was observed due to the effect of citric acid as a hole scavenger. Finally, regeneration tests revealed that the Ce/MoS2 composite could be recycled and reused.

Sign in / Sign up

Export Citation Format

Share Document