Investigation of optoelectronic and thermoelectric properties of half-metallic BaRuO3 using DFT+U

2018 ◽  
Vol 07 (03) ◽  
pp. 1850018 ◽  
Author(s):  
A. Labdelli ◽  
A. Boukortt ◽  
S. Meskine ◽  
H. Abbassa ◽  
A. Zaoui
Keyword(s):  
Thermal Conductivity ◽  
Optical Properties ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Coulomb Repulsion ◽  
Full Potential ◽  
Thermoelectric Efficiency ◽  
Generalized Gradient ◽  
Metallic Behavior ◽  
Half Metallic

We have studied the structural, electronic, magnetic, thermoelectric and optical properties of the half-metal BaRuO3 using the accurate full-potential linearized augmented plane wave (FP-LAPW) method based on the density functional theory (DFT). The generalized gradient approximation (GGA) was used to treat the exchange and correlation potential. The GGA[Formula: see text] approximation was also used to enhance the description of the electronic structure after calculating theoretically the Coulomb repulsion ([Formula: see text][Formula: see text]eV). The ferromagnetic (FM) phase of BaRuO3 is more stable. This result is in accordance with experimental and theoretical calculations. The calculated magnetic moments in BaRuO3 were found to arise especially from the Ru-4d state electrons. We have obtained the semiconductor gap (0.9[Formula: see text]eV) in spin-up while in spin down, the metal character was dominant, and therefore BaRuO3 has a half-metallic behavior. The thermoelectric efficiency was 0.12 at room temperature. Here we have considered only the electronic thermal conductivity, we have not included the lattice thermal conductivity. The relaxation time was assumed constant. The [Formula: see text] approximation was also used to analyze the optical properties by determining the complex dielectric function from which are derived the other parameters.

Electronic Structure and Ferromagnetic Properties of Doped Calcium Sulfide Ca1−xTMxS (TM = V, Cr and Co)

SPIN ◽  
2020 ◽  
Vol 10 (02) ◽  
pp. 2050013 ◽  
Author(s):  
Amina Aiche ◽  
Abdelkader Tadjer ◽  
Hadj Moulay Ahmed Mazouz ◽  
Bendouma Doumi ◽  
Houari Khachai
Keyword(s):  
Magnetic Properties ◽  
Electronic Structure ◽  
Density Functional ◽  
Double Exchange ◽  
Ferromagnetic State ◽  
Spin Splitting ◽  
Full Potential ◽  
Generalized Gradient ◽  
Metallic Behavior ◽  
Half Metallic

The electronic structure and magnetic properties of diluted Ca[Formula: see text]TMxS (TM[Formula: see text][Formula: see text][Formula: see text]V, Cr and Co) in the rocksalt structure at concentrations [Formula: see text], 0.125 and 0.25 were studied using the full-potential linearized augmented plane wave approximation of the density functional theory with the Wu-Cohen generalized gradient approximation (WC-GGA) and the Tran–Blaha-modified Becke–Johnson (TB-mBJ) potential. Features such as lattice constant, bulk modulus, spin-polarized band structures, total and local densities of states and magnetic properties have been computed. The electronic structure show that Ca[Formula: see text](V, Cr)xS at all the studied concentrations and the diluted Ca[Formula: see text]CoxS with [Formula: see text] compounds are half-metallic ferromagnets with spin polarization of 100%. The calculated total magnetic moments for Ca[Formula: see text]VxS and Ca[Formula: see text]CoxS show the same integer value of 3[Formula: see text][Formula: see text] per formula unit and Ca[Formula: see text]CrxS exhibit a total magnetic moment of 4[Formula: see text][Formula: see text], which confirm the half-metallic behavior of these compounds. We also calculated the values of the band edge spin splitting of the valence and conduction bands and the exchange constants. We have found that the ferromagnetic state is stable by the p-d exchange associated with the double-exchange mechanism. The diluted Ca[Formula: see text](V,Cr,Co)xS are found to be new promising candidates for spintronic applications.

First principle investigations of the optical properties of Zn1-xMgxS, Zn1-xMgxSe and Zn1-xMgxTe ternary alloys

2014 ◽  
Vol 28 (31) ◽  
pp. 1450221 ◽  
Author(s):  
M. Dadsetani ◽  
A. Zeinivand
Keyword(s):  
Optical Properties ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Random Phase ◽  
Ternary Alloys ◽  
Optical Absorption Coefficient ◽  
Full Potential ◽  
Generalized Gradient ◽  
The Density Functional Theory ◽  
Ternary Semiconductor

Optical properties of Zn 1-x Mg x S , Zn 1-x Mg x Se and Zn 1-x Mg x Te (0 ≤ x ≤ 1) ternary semiconductor alloys are calculated using the full potential linearized augmented plane wave within the density functional theory. The exchange correlation potential is treated by the generalized gradient approximation (GGA) within Perdew et al. scheme. The real and imaginary parts of the dielectric function ε(ω), the refractive index n(ω), the extinction coefficient k(ω), the optical absorption coefficient α(ω), the reflectivity R(ω) and the electron energy loss function (EELS) are calculated within random phase approximation (RPA). Our results are compared with the previous theoretical calculations and available experimental data. Moreover, the interband transitions responsible for the structures seen in the spectra are specified. It is shown that, the chalcogen p states as initial and Zn 4s, Mg 3s, chalcogen d states as final states perform the major role in optical transitions.

High Spin Polarization and Thermoelectric Efficiency of Half-Metallic Ferromagnetic CrYSn (Y=Ca, Sr) of Half-Heusler Compounds

SPIN ◽  
2020 ◽  
Vol 10 (02) ◽  
pp. 2050010 ◽  
Author(s):  
B. Bouadjemi ◽  
T. Lantri ◽  
M. Matougui ◽  
M. Houari ◽  
R. Bentata ◽  
...  
Keyword(s):  
Thermoelectric Properties ◽  
Density Functional ◽  
Ferromagnetic State ◽  
Full Potential ◽  
Thermoelectric Efficiency ◽  
Generalized Gradient ◽  
Half Metallic ◽  
Theoretical Predictions ◽  
Thermodynamic Conditions ◽  
High Spin Polarization

In the present work we have performed self-consistent ab-initio calculation using the full-potential linearized augmented plane-wave method (FP-LAPW), based on the density functional theory (DFT) as implemented in the Wien2k code to study the structural, electronic, magnetic, thermodynamic and thermoelectric properties of the half-heusler compound CrYSn ([Formula: see text], Sr) using generalized gradient approximation (GGA) described by Perdew–Burke–Ernzerhof (PBE), GGA+U and the modified Beck–Johnson correction (mBJ), the obtained results show that the compound is stable in the ferromagnetic state (FM) in [Formula: see text] phase on one hand and has a half-metallic character (metallic nature in spin up channel and semiconductor one in spin down channel with an indirect gap) on the other hand thus, the compound is a good candidate for spintronic applications, moreover it shows a very interesting thermoelectric predisposition in the minority spin or spin down channel at room temperature consisting of a very high Seebeck coefficient, high electrical conductivity and figure of merit near unity for the two compounds. The thermodynamic properties of CrCaSn and CrSrSn compounds using Gibbs code are studied for the first time. This study showed that these compounds can be used in extreme thermodynamic conditions. Since no experimental data were reported until now concerning this compound, our theoretical predictions of electronic, thermodynamic and thermoelectric properties are likely to be experimentally verified.

AB INITIO STUDY OF STRUCTURAL, ELECTRONIC AND OPTICAL PROPERTIES OF MgxCd1-xX (X = S, Se, Te) ALLOYS

2012 ◽  
Vol 26 (30) ◽  
pp. 1250168 ◽  
Author(s):  
N. A. NOOR ◽  
A. SHAUKAT
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Ternary Alloys ◽  
Full Potential ◽  
Generalized Gradient ◽  
Calculated Density ◽  
Electronic And Optical Properties ◽  
Direct Band

This study describes structural, electronic and optical properties of Mg x Cd 1-x X (X = S, Se, Te) alloys in the complete range 0≤x ≤1 of composition x in the zinc-blende (ZB) phase with the help of full-potential linearized augmented plane wave plus local orbitals (FP-LAPW+lo) method within density functional theory (DFT). In order to calculate total energy, generalized gradient approximation (Wu–Cohen GGA) has been applied, which is based on optimization energy. For electronic structure calculations, the corresponding potential is being optimized by Engel–Vosko GGA formalism. Our calculations reveal the nonlinear variation of lattice constant and bulk modulus with different concentration for the end binary and their ternary alloys, which slightly deviates from Vegard's law. The calculated band structures show a direct band gap for all three alloys with increasing order in the complete range of the compositional parameter x. In addition, we have discussed the disorder parameter (gap bowing) and concluded that the total band gap bowing is substantially influenced by the chemical (electronegativity) contribution. The calculated density of states (DOS) of these alloys is discussed in terms of contribution from various s-, p- and d-states of the constituent atoms and charge density distributions plots are analyzed. Optical properties have been presented in the form of the complex dielectric function ε(ω), refractive index n(ω) and extinction coefficient k(ω) as function of the incident photon energy, and the results have been compared with existing experimental data and other theoretical calculations.

Theoretical investigations of the structural, electronic and optical properties of Hg1−xCdxS alloys

2016 ◽  
Vol 30 (11) ◽  
pp. 1650173 ◽  
Author(s):  
S. Al-Rajoub ◽  
B. Hamad
Keyword(s):  
Optical Properties ◽  
Density Functional ◽  
Local Density ◽  
Ternary Alloys ◽  
Full Potential ◽  
Generalized Gradient ◽  
Metallic Behavior ◽  
Electronic And Optical Properties ◽  
Lattice Constants ◽  
Theoretical Investigations

The structural, electronic and optical properties of mercury cadmium sulfide (Hg[Formula: see text]Cd[Formula: see text]S) alloys with [Formula: see text] = 0.0, 0.25, 0.5, 0.75 are studied using density functional theory (DFT) within full-potential linearized augmented plane wave (FPLAPW) method. We used the local density approximation (LDA), the generalized gradient approximation (GGA), Hubbard-corrected functionals (GGA/LDA[Formula: see text]+[Formula: see text][Formula: see text]) and the modified Becke–Johnson (LDA/GGA)-mjb hybrid potentials to treat the exchange-correlation functional [Formula: see text]. We found that LDA functional predicts better lattice constants than GGA functional. Mercury sulfide (HgS) binary alloy was found to exhibit a semi-metallic behavior using all functional with an inverted band gap close to the experimental value. However, the hybrid functionals were more successful than LDA and GGA functionals to predict the correct electronic structure of Hg[Formula: see text]Cd[Formula: see text]S ternary alloys. The results of the electronic and optical band gaps are consistent for Hg[Formula: see text]Cd[Formula: see text]S ternary alloys.

First principles calculations of structural, electronic and optical properties of InN compound

2015 ◽  
Vol 29 (05) ◽  
pp. 1550028 ◽  
Author(s):  
R. Graine ◽  
R. Chemam ◽  
F. Z. Gasmi ◽  
R. Nouri ◽  
H. Meradji ◽  
...  
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Density Functional ◽  
Local Density ◽  
Indium Nitride ◽  
Alternative Form ◽  
Full Potential ◽  
Generalized Gradient ◽  
Pressure Derivative ◽  
Electronic And Optical Properties

We carried out ab initio calculations of structural, electronic and optical properties of Indium nitride ( InN ) compound in both zinc blende and wurtzite phases, using the full-potential linearized augmented plane wave method (FP-LAPW), within the framework of density functional theory (DFT). For the exchange and correlation potential, local density approximation (LDA) and generalized gradient approximation (GGA) were used. Moreover, the alternative form of GGA proposed by Engel and Vosko (EV-GGA) and modified Becke–Johnson schemes (mBJ) were also applied for band structure calculations. Ground state properties such as lattice parameter, bulk modulus and its pressure derivative are calculated. Results obtained for band structure of these compounds have been compared with experimental results as well as other first principle computations. Our results show good agreement with the available data. The calculated band structure shows a direct band gap Γ → Γ. In the optical properties section, several optical quantities are investigated; in particular we have deduced the interband transitions from the imaginary part of the dielectric function.

Ab-Initio Investigation of Strain Effects on the Physical Properties of PdVTe Alloy

2021 ◽  
Author(s):  
Khodja Djamila ◽  
Djaafri Tayeb ◽  
Djaafri Abdelkader ◽  
Bendjedid Aicha ◽  
Hamada Khelifa ◽  
...  
Keyword(s):  
Optical Properties ◽  
Density Of States ◽  
Phonon Dispersion ◽  
Electronic Band Structure ◽  
Debye Model ◽  
Full Potential ◽  
Electronic Band ◽  
Metallic Behavior ◽  
Strain Effects ◽  
Half Metallic

The investigations of the strain effects on magnetism, elasticity, electronic, optical and thermodynamic properties of PdVTe half-Heusler alloy are carried out using the most accurate methods to electronic band structure, i.e. the full-potential linearized augmented plane wave plus a local orbital (FP-LAPW + lo) approach. The analysis of the band structures and the density of states reveals the Half-metallic behavior with a small indirect band gap Eg of 0.51 eV around the Fermi level for the minority spin channels. The study of magnetic properties led to the predicted value of total magnetic moment µtot = 3µB, which nicely follows the Slater–Pauling rule µtot = Zt -18. Several optical properties are calculated for the first time and the predicted values are in line with the Penn model. It is shown from the imaginary part of the complex dielectric function that the investigated alloy is optically metallic. The variations of thermodynamic parameters calculated using the quasi-harmonic Debye model, accord well with the results predicted by the Debye theory. Moreover, the dynamical stability of the investigated alloy is computed by means of the phonon dispersion curves, the density of states, and the formation energies. Finally, the analysis of the strain effects reveals that PdVTe alloy preserves its ferromagnetic half metallic behavior, it remains mechanically stable, the ionic nature dominates the atomic bonding, and the thermodynamic and the optical properties keep the same features in a large interval of pressure.

Ferrimagnetic Half-Metallicity of the New Quaternary Heusler Alloy CoCrScIn: FP-LAPW Method

SPIN ◽  
2021 ◽  
Vol 11 (02) ◽  
pp. 2150017
Author(s):  
Halima Hamada ◽  
Keltouma Boudia ◽  
Friha Khelfaoui ◽  
Kadda Amara ◽  
Toufik Nouri ◽  
...  
Keyword(s):  
Magnetic Moment ◽  
Density Functional ◽  
Structural Parameters ◽  
Magnetic Transition ◽  
Plane Waves ◽  
Full Potential ◽  
Half Metallicity ◽  
Metallic Behavior ◽  
Magnetic Transition Temperature ◽  
Half Metallic

The structural, electronic, elastic and magnetic properties of CoCrScIn were investigated using first principle calculations with applying the full-potential linearized augmented plane waves (FP-LAPW) method, based totally on the density functional theory (DFT). After evaluating the results, the calculated structural parameters reveal that CoCrScIn compound is stable in its ferrimagnetic configuration of the type-III structure. The mechanical properties show its brittle and stiffer behavior. The formation energy value showed that CoCrScIn can be experimentally synthesized. Additionally, the obtained band structures and density of states (DOS) reflect the half-metallic behavior of CoCrScIn, with an indirect bandgap of 0.43[Formula: see text]eV. The total magnetic moment of 3[Formula: see text][Formula: see text] and half-metallic ferrimagnetic state are maintained in the range 5.73–6,79 Å. The magnetic moment especially issues from the Cr-[Formula: see text] and Co-[Formula: see text] spin-polarizations. Furthermore, the calculations of Curie temperature reveal that CoCrScIn has high magnetic transition temperature of 836.7[Formula: see text]K.

First-Principles Studies of the Magnetic Properties of hcp Cr in Cr/Cu(111) and Cr/Ru(0001) Superlattices

2002 ◽  
Vol 721 ◽  
Author(s):  
G. Y. Guo
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Recent Observation ◽  
Theoretical Calculations ◽  
Ferromagnetic State ◽  
Full Potential ◽  
Generalized Gradient ◽  
Plane Wave Method ◽  
Wide Range ◽  
Linearized Augmented Plane Wave

AbstractLatest first-principles density functional theoretical calculations using the generalized gradient approximation and highly accurate all-eleectron full-potential linearized augmented plane wave method, show that bulk hcp Cr would be a paramagnet and that no ferromagnetic state could be stabilized over a wide range of volume [1]. To understand the recent observation of the weakly ferromagnetic state of Cr in hcp Cr/Ru (0001) superlattices [2], the same theoretical calculations have been carried out for the hcp Cr3/Ru7 (0001) and hcp Cr3/fcc Cu6 (111) superlattices. The Cr/Ru superlattice is found to be ferromagnetic with a small magnetic moment of ∼0.31μB/Cr while in contrast, Cr/Cu superlattice is found to be nonmagnetic.

DFT study of elastic, half-metallic and optical properties of Co2V(Al, Ge, Ga and Si) compounds

2017 ◽  
Vol 31 (14) ◽  
pp. 1750109 ◽  
Author(s):  
Heidar Khosravi ◽  
Arash Boochani ◽  
Golnaz Rasolian ◽  
Shahram Solaymani ◽  
Sirvan Naderi
Keyword(s):  
Optical Properties ◽  
Density Functional ◽  
Magnetic Moments ◽  
Elastic Stability ◽  
Metallic Behavior ◽  
Functional Theory ◽  
Spin Mode ◽  
Half Metallic ◽  
Lattice Constants ◽  
Optical Treatment

First-principles study of elastic, electronic and optical properties of full-Heusler Co2V(Al, Ge, Ga and Si) compounds are calculated through density functional theory (DFT) to obtain and compare the mentioned properties. Equilibrium lattice constants of these compounds are in good agreement with other works. Electronic calculations are shown full spin polarization at Fermi level for all compounds, so in the down spin, indirect bandgap is calculated as 0.33, 0.6, 0.2 and 0.8 eV for Co2V(Al, Ge, Ga and Si), respectively. The integer amounts of the magnetic moments are compatible with Slater–Pauling role. The optical treatment of Co2VGa is different from three other compounds. All mentioned compounds have metallic behavior by 22 eV plasmonic frequency. The imaginary part of the dielectric function for the up spin indicates that the main optical transitions occurred in this spin mode. Moreover, the elastic results show that the Co2VGa does not have elastic stability, but the other three compounds have fully elastic stability and the Co2V(Al, Ge and Si) belong to the hardness of materials.

Sign in / Sign up

Export Citation Format

Share Document