Recent developments in numerical techniques for treating material interfaces

1975 ◽  
Author(s):  
Hans M. Ruppel
Author(s):  
C. Bagault ◽  
D. Nélias ◽  
M.-C. Baietto

A contact model using semi analytical methods, relying on elementary analytical solutions, has been developed. It is based on numerical techniques adapted to contact mechanics, with strong potential for inelastic, inhomogeneous or anisotropic problems. Recent developments aim to quantify displacements and stresses of an anisotropic half space with an anisotropic coating which is in contact with a rigid sphere. The influence of symmetry axes on the contact problem solution will be more specifically analyzed.


2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Caroline Bagault ◽  
Daniel Nélias ◽  
Marie-Christine Baietto

A contact model using semi-analytical methods, relying on elementary analytical solutions, has been developed. It is based on numerical techniques adapted to contact mechanics, with strong potential for inelastic, inhomogeneous or anisotropic materials. Recent developments aim to quantify displacements and stresses of an anisotropic material contacting both an isotropic or anisotropic material. The influence of symmetry axes on the contact solution will be more specifically analyzed.


Author(s):  
C. Bagault ◽  
D. Nélias ◽  
M.-C. Baietto ◽  
T. Ovaert

For most composite and mono-crystal materials their compositions or the elaboration and manufacturing processes imply that it exists one or two main directions or even a general anisotropy. Moreover, coatings are often used to prevent or control wear. Coatings do not have, generally, the same properties as the substrate and may have various thicknesses. The influence of the anisotropy orientations (in the coating and in the substrate) have to be taken into account to better predict the distribution of the contact pressure and the subsurface stress-field in order to optimize the service life of industrial components. A contact model using semi analytical methods, relying on elementary analytical solutions, has been developed. It is based on numerical techniques adapted to contact mechanics. Recent developments aim to quantify displacements and stresses of a layered anisotropic elastic half space which is in contact with a rigid sphere. The influence of material properties and layer thickness on the contact problem solution will be more specifically analyzed.


2013 ◽  
Vol 22 (04) ◽  
pp. 1330005 ◽  
Author(s):  
ULRICH SPERHAKE

We present an overview of recent developments in numerical relativity studies of higher dimensional spacetimes with a focus on time evolutions of black hole (BH) systems. After a brief review of the numerical techniques employed for these studies, we summarize results grouped into the following three areas: (i) numerical studies of fundamental properties of BHs, (ii) applications of BH collisions to the modeling of Trans-Planckian scattering and (iii) numerical studies of asymptotically anti-de Sitter spacetimes in the context of the gauge-gravity duality.


1987 ◽  
Vol 40 (11) ◽  
pp. 1553-1561 ◽  
Author(s):  
M. Sathyamoorthy

This paper is concerned with the recent developments in the nonlinear vibrational analysis of plates of various geometries. Although most of the material presented here deals with geometric type nonlinearities, attention is also given to other types of nonlinearities such as nonlinear material behavior. Particular attention is given to the recent developments in the analytical methods of solution. Recent research leading to advances in numerical techniques is also included. Complicating effects such as the effects transverse shear deformation, rotatory inertia, anisotropy, initial imperfections, and variable rigidity on the vibration behavior of plates are reviewed and discussed. Finally, some general conclusions are presented along with the author’s views regarding the future research trends in this area.


1997 ◽  
Vol 491 ◽  
Author(s):  
Andrew Horsfield ◽  
Steven David Kenny

ABSTRACTTight binding is often seen as a middle ground method, lying between accurate ab iniiio methods, and fast empirical potential methods. The challenge is to make tight binding both as fast and as accurate as possible. One way to achieve this is to take established ab initio methods, and apply systematic approximations and efficient numerical techniques to obtain the greatest possible speed. A recently developed method, employing this approach, is described results presented for silicon, and recent developments (including fully self-consistent extensions) are reported.


Author(s):  
C. Colliex ◽  
P. Trebbia

The physical foundations for the use of electron energy loss spectroscopy towards analytical purposes, seem now rather well established and have been extensively discussed through recent publications. In this brief review we intend only to mention most recent developments in this field, which became available to our knowledge. We derive also some lines of discussion to define more clearly the limits of this analytical technique in materials science problems.The spectral information carried in both low ( 0<ΔE<100eV ) and high ( >100eV ) energy regions of the loss spectrum, is capable to provide quantitative results. Spectrometers have therefore been designed to work with all kinds of electron microscopes and to cover large energy ranges for the detection of inelastically scattered electrons (for instance the L-edge of molybdenum at 2500eV has been measured by van Zuylen with primary electrons of 80 kV). It is rather easy to fix a post-specimen magnetic optics on a STEM, but Crewe has recently underlined that great care should be devoted to optimize the collecting power and the energy resolution of the whole system.


Author(s):  
Kent McDonald

At the light microscope level the recent developments and interest in antibody technology have permitted the localization of certain non-microtubule proteins within the mitotic spindle, e.g., calmodulin, actin, intermediate filaments, protein kinases and various microtubule associated proteins. Also, the use of fluorescent probes like chlorotetracycline suggest the presence of membranes in the spindle. Localization of non-microtubule structures in the spindle at the EM level has been less rewarding. Some mitosis researchers, e.g., Rarer, have maintained that actin is involved in mitosis movements though the bulk of evidence argues against this interpretation. Others suggest that a microtrabecular network such as found in chromatophore granule movement might be a possible force generator but there is little evidence for or against this view. At the level of regulation of spindle function, Harris and more recently Hepler have argued for the importance of studying spindle membranes. Hepler also believes that membranes might play a structural or mechanical role in moving chromosomes.


Author(s):  
G.Y. Fan ◽  
J.M. Cowley

In recent developments, the ASU HB5 has been modified so that the timing, positioning, and scanning of the finely focused electron probe can be entirely controlled by a host computer. This made the asynchronized handshake possible between the HB5 STEM and the image processing system which consists of host computer (PDP 11/34), DeAnza image processor (IP 5000) which is interfaced with a low-light level TV camera, array processor (AP 400) and various peripheral devices. This greatly facilitates the pattern recognition technique initiated by Monosmith and Cowley. Software called NANHB5 is under development which, instead of employing a set of photo-diodes to detect strong spots on a TV screen, uses various software techniques including on-line fast Fourier transform (FFT) to recognize patterns of greater complexity, taking advantage of the sophistication of our image processing system and the flexibility of computer software.


Sign in / Sign up

Export Citation Format

Share Document