scholarly journals Magnetic Separation in South Africa

1985 ◽  
Vol 1 (4) ◽  
pp. 205-232 ◽  
Author(s):  
Ian James Corrans ◽  
Jan Svoboda

The use of magnetic separators in the various mineral processing facilities in South Africa is described. A large number are used to recover medium in dense medium plants. The manufacture of various types of magnetic separation machines by three local suppliers is highlighted. The potential use of highgradient and/or high–intensity magnetic separation in the recovery of gold, uranium, and phosphate minerals is discussed.

2013 ◽  
Vol 826 ◽  
pp. 34-37 ◽  
Author(s):  
Guo Zhen Liu ◽  
Shu Juan Dai ◽  
Li Mei Bai ◽  
Yu Xin Ma ◽  
Yong Zhang

The main elements can be recovered for mineral processing in a mineral containing titanium of Baoding area were Ti, Fe and V, and the elements in the main gangue minerals were Si and Al. Gravity concentration, gravity concentration-high intensity magnetic separation and gravity concentration-flotation tests were performed on the ore sample respectively. The results showed that, in the test of shaking table, when the grinding fineness was -0.074mm 93%, the productivity of concentrate can reach 32.24%; when grinding fineness was -0.074mm 93%, after gravity concentration-magnetic separation, 30.25% of concentrate productivity can be attained; when the grinding fineness was -0.074mm 85%, after gravity concentration-flotation, the productivity of concentrate was 3.31%. Maybe it's the condition of the tests wasn't controlled well, especially adjusting pH value in the flotation stage, it's hard to control, so the results were not very good.


2012 ◽  
Vol 550-553 ◽  
pp. 2831-2834
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang

The mineral processing experimental research was carried out on a high mud content lean hematite. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation for obtaining concentrate - high-intensity magnetic separation for discarding tailings-gravity separation(shaking table)”,a final iron concentrate with TFe grade of 65.89% ,yield of 19.35% and iron recovery of 52.32% from the raw ores with TFe grade of 24.07% was obtained, with the first stage grinding size being 50% -200 mesh and the second stage,95% -200 mesh.


2019 ◽  
Vol 116 (3) ◽  
pp. 324 ◽  
Author(s):  
Kuranga Ibrahim Ayinla ◽  
Alafara Abdullahi Baba ◽  
Bankim Chandra Tripathy ◽  
Malay Kumar Ghosh ◽  
Rajan Kumar Dwari ◽  
...  

This study, focused on the beneficiation of a Nigerian complex chromite ore sourced from Tunga-Kaduka, Anka Local Government of Zamfara State, Nigeria, assaying 45.85% Cr2O4 and 54.15% mineral impurities, was enriched concurrently through sink floatation and magnetic separation techniques. The chromite ore initially analyzed to contain silicate impurities was found not suitable for metallurgical purposes. Thus, enrichment was examined through gravity separation studies using organic liquid with different specific gravities at 2.8, 3.3, and 4.0. The separation of chromite ore with lowest particle size fraction was done using Mozley mineral separator followed by the magnetic separation of the sink product by magnetic separator. The results obtained revealed about 77% of the total material containing 300 μm particle size, 52% ˂ 212 μm and 17% below 75 μm. Subsequent analysis of the beneficiated ore was carried out by wet chemical analysis and atomic absorption spectrophotometer. The results showed that Cr2O4 content increased to 78.34% from initial 45.83% with maximum Cr:Fe ratio of 3.2:1, representing 84.27% of chromium metal present in the ore. The enrichment of Cr2O4 obtained in this study could be found metallurgically applicable in the electro-deposition and ferro-chromium alloy production practices.


2017 ◽  
Vol 27 (1) ◽  
Author(s):  
RM Garland ◽  
M Naidoo ◽  
B Sibiya ◽  
R Oosthuizen

In responding to deteriorating air quality, many countries, including South Africa, have implemented national programmes that aim to manage and regulate ambient air quality, and the emissions of air pollutants. One aspect within these management strategies is effective communication to stakeholders, including the general public, with regard to the state and trend of ambient air quality in South Africa. Currently, information on ambient air quality is communicated through ambient mass concentration values, as well as number of exceedances of South African National Ambient Standards. However, these do not directly communicate the potential impact on human health and the ecosystem. To this end, the use of air quality indicators is seen as a potential way to achieve communication to stakeholders in a simplified, yet scientifically defensible manner. Air quality indicators and their source data from the Environmental Performance Index (EPI) were interrogated to understand their potential use in South Africa. An assessment of four air quality indicators, together with their source data, showed improvements in air quality over the time period studied, though the input data do have uncertainties. The source data for the PM indicators, which came from a global dataset, underestimated the annual PM2.5 concentrations in the Highveld Priority Area and Vaal Triangle Airshed Priority Area over the time period studied (2009-2014) by ~3.7 times. This highlights a key limitation of national-scale indicators and input data, that while the data used by the EPI are a well-thought out estimate of a country’s air quality profile, they remain a generalised estimate. The assumptions and uncertainty inherent in such an ambitious global-wide attempt make the estimates inaccurate for countries without proper emissions tracking and accounting and few monitoring stations, such as South Africa. Thus, the inputs and resultant indicators should be used with caution until such a time that local and ground-truthed data and inputs can be utilised.


2015 ◽  
Vol 50 (11) ◽  
pp. 1689-1694 ◽  
Author(s):  
Huifen Zhang ◽  
Luzheng Chen ◽  
Jianwu Zeng ◽  
Li Ding ◽  
Jian Liu

2015 ◽  
Vol 1094 ◽  
pp. 397-400
Author(s):  
Xian Xie ◽  
Zi Xuan Yang ◽  
Xiong Tong ◽  
Ji Yong Li

Iron ore minerals are mainly silicate-type iron minerals in raw ore, and its distribution rate was 51.93%; followed by magnetic iron, and its distribution rate was 36.81%; content and distribution rate of other minerals was very low; element grade of iron, phosphorus, sulfur, silica were 11.90%, 0.043%, 0.013% and 45.23%, the main gangue were silica and calcium oxide, recyclable iron minerals mainly is magnetic iron mineral. Due to the grade of iron of raw ore and the amounts of optional magnetite was relatively little, in order to investigate the optional of low-grade ore, weak magnetic separation test and weak magnetic separation tailings-strong magnetic separation test were put into effect.


Sign in / Sign up

Export Citation Format

Share Document