scholarly journals Span Length Variance Effect on the Fatigue Life of FRP Bridge Deck

2013 ◽  
Vol 2013 ◽  
pp. 1-10
Author(s):  
Ki-Tae Park ◽  
Young-Jun Yu ◽  
Hyunseop Shin
Keyword(s):  
Fatigue Life ◽  
Life Cycle Cost ◽  
Bridge Deck ◽  
Safety Margin ◽  
Fatigue Tests ◽  
Span Length ◽  
Reinforced Composite ◽  
Frp Bridge Deck ◽  
Change Trend ◽  
Truck Load

Fiber reinforced composite materials have the merits of light weight and durability for bridge deck and are estimated to be superior in economy to conventional deck materials considering the life-cycle cost of bridge. In this study, fatigue tests were conducted for the span lengths of 2.0 m and 2.5 m in order to investigate the change trend of fatigue characteristics of composite material deck according to the change in the span length. The result showed that the fatigue life rapidly reduces to about 25% when the span increases by 25%. However, considering that the fatigue performance safety margin was approximately 1.6 times more than the design axle load of the DB-24 design truck load in Korea, even at the span of 2.5 m, it is judged that the FRP decks being considered can be effectively used at a span length of 2.5 m.

FRP bridge deck life cycle cost analyzer

2008 ◽  
pp. 883-888
Author(s):  
Hota GangaRao ◽  
Robert Creese ◽  
Sidharta Sahirman
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Bridge Deck ◽  
Frp Bridge Deck

Study of Fatigue Tests on the Structural Details of Welding Joints of Integral Bridge Deck and Main Girder Gusset Plates

2011 ◽  
Vol 243-249 ◽  
pp. 1638-1645
Author(s):  
Cai Ping Huang ◽  
Zhong Xian Zhang ◽  
Ji Zhang ◽  
Jin Zhou Chen
Keyword(s):  
Fatigue Life ◽  
Bridge Deck ◽  
Fatigue Tests ◽  
Fatigue Performance ◽  
Scale Model ◽  
Gusset Plates ◽  
Integral Bridge ◽  
Structural Details ◽  
Tensile Forces ◽  
Welding Joints

Under the action of both dead and live loads, the welding joints of the integral bridge deck and the main truss gusset plates of a steel truss bridge in the transverse and longitudinal directions are all subjected to tensile force, the fatigue performance of which greatly influence the safety and durability of the bridge during operation. Fatigue tests were carried out on a full-scale model designed and made in accordance with the structural details of the welding joints of the integral bridge deck and the main truss gusset plates of Dashengguan Changjiang River Bridge. On the basis of the results of the fatigue tests, the stress distribution of the welding joints was analyzed, the fatigue life of the welding joints under load cycles with constant amplitude was discussed and the fatigue performance of the welding joints under the condition of two-way tensile forces was studied. It is concluded that under the effect of fatigue loading with given amplitude, the fatigue life of the welding joints is more than 200 million numbers of load cycles, the structural details of welding joints have ample fatigue resistant ability under the condition of two-way tensile forces, and the maximum main stress value of the fatigue tests is lower than the allowable fatigue stress value given in various codes and relevant references and the fatigue strength meets requirement.

Life-cycle cost assessment model for fiber reinforced polymer bridge deck panels

2007 ◽  
Vol 34 (8) ◽  
pp. 976-991 ◽  
Author(s):  
TaeHoon Hong ◽  
Makarand Hastak
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Bridge Deck ◽  
Assessment Model ◽  
Fiber Reinforced Polymer ◽  
Cost Assessment ◽  
Fiber Reinforced ◽  
Deck Panels ◽  
Reinforced Polymer ◽  
Frp Bridge Deck

To enhance the application of fiber reinforced polymer (FRP) bridge deck panels in the infrastructure area, a practical method is required that would allow probable assessment of the life-cycle cost of advanced composite applications in construction compared with that of conventional materials, at various discount rates, while integrating the available reference data. The overall objective of this research is to develop a performance-based probable life-cycle cost assessment model for FRP bridge deck panels. The life-cycle cost assessment model for FRP bridge deck panels comprises a life-cycle performance module (module-1) and a life-cycle cost optimization module (module-2). The model thus developed in this paper can then be used for other applications of composites in construction. The objective of module-1 is to develop an analytical model that is capable of predicting the structural deterioration over time to assess the deterioration rating per year of FRP bridge deck panels. The objective of module-2 is to develop an analytical model that is capable of assessing the optimal life-cycle cost of FRP bridge deck panels. Three case studies were conducted to validate the logic and results of the process algorithm for the life-cycle cost assessment. The model will be very helpful for the construction industry in evaluating various material options and to justify or deny the feasibility of using composite materials on specific construction projects. Since the life-cycle cost assessment of composite materials in construction has not been dealt with as proposed, it is anticipated that many of the procedures and systems mentioned would include fundamental research and possible innovations.Key words: fiber reinforced materials, Monte Carlo method, life-cycle cost, performance valuation.

scholarly journals A Comprehensive Life-Cycle Cost Analysis Approach Developed for Steel Bridge Deck Pavement Schemes

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 565
Author(s):  
Changbo Liu ◽  
Zhendong Qian ◽  
Yang Liao ◽  
Haisheng Ren
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Bridge Deck ◽  
Analysis Approach ◽  
Steel Bridge ◽  
User Cost ◽  
Construction Quality ◽  
Concrete System ◽  
Traffic Conditions ◽  
Bridge Deck Pavement

This study aims to evaluate the economy of a steel bridge deck pavement scheme (SBDPS) using a comprehensive life-cycle cost (LCC) analysis approach. The SBDPS are divided into the “epoxy asphalt concrete system”(EA system) and“ Gussasphalt concrete system”(GA system) according to the difference in the material in the lower layer of the SBDPS. A targeted LCC checklist, including manager cost and user cost was proposed, and a Markov-based approach was applied to establish a life-cycle performance model with clear probability characteristics for SBDPS. Representative traffic conditions were designed using a uniform design method, and the LCC of SBDPS under representative traffic conditions and different credibility (construction quality as a random factor) was compared. The reliability of the LCC analysis approach was verified based on the uncertainty analysis method. Based on an expert-scoring approach, a user cost weight was obtained to ensure it is considered reasonably in the LCC analysis. Compared with the cumulative traffic volume, the cumulative equivalent single axle loads (CESAL) have a closer relationship with the LCC. The GA system has better LCC when the CESAL is less, while the EA system is just the opposite. The breaking point of CESAL for the LCC of the EA system and the GA system is 15 million times. The LCC analysis of SBDPS should consider the influence of random factors such as construction quality. The comprehensive LCC analysis approach in this paper can provide suggestions for bridge-management departments to make a reasonable selection on SBDPS.

scholarly journals Experimental study on fatigue performance of Q420qD high-performance steel cross joint in complex environment

2021 ◽  
Author(s):  
Haigen Cheng ◽  
Cong Hu ◽  
Yong Jiang
Keyword(s):  
Fatigue Life ◽  
High Performance ◽  
Steel Structure ◽  
Steel Structures ◽  
Fatigue Tests ◽  
Fatigue Performance ◽  
Corrosive Media ◽  
Joint Connection ◽  
High Performance Steel ◽  
The Cross

AbstractThe steel structure under the action of alternating load for a long time is prone to fatigue failure and affects the safety of the engineering structure. For steel structures in complex environments such as corrosive media and fires, the remaining fatigue life is more difficult to predict theoretically. To this end, the article carried out fatigue tests on Q420qD high-performance steel cross joints under three different working conditions, established a 95% survival rate $$S{ - }N$$ S - N curves, and analyzed the effects of corrosive media and high fire temperatures on its fatigue performance. And refer to the current specifications to evaluate its fatigue performance. The results show that the fatigue performance of the cross joint connection is reduced under the influence of corrosive medium, and the fatigue performance of the cross joint connection is improved under the high temperature of fire. When the number of cycles is more than 200,000 times, the design curves of EN code, GBJ code, and GB code can better predict the fatigue life of cross joints without treatment, only corrosion treatment, and corrosion and fire treatment, and all have sufficient safety reserve.

scholarly journals Fatigue Testing of Wearable Sensing Technologies: Issues and Opportunities

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4070
Author(s):  
Andrea Karen Persons ◽  
John E. Ball ◽  
Charles Freeman ◽  
David M. Macias ◽  
Chartrisa LaShan Simpson ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Prediction Models ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Wearable Sensors ◽  
Fatigue Tests ◽  
Proof Of Concept ◽  
Cycle Fatigue ◽  
Wearable Sensing ◽  
Failure Data

Standards for the fatigue testing of wearable sensing technologies are lacking. The majority of published fatigue tests for wearable sensors are performed on proof-of-concept stretch sensors fabricated from a variety of materials. Due to their flexibility and stretchability, polymers are often used in the fabrication of wearable sensors. Other materials, including textiles, carbon nanotubes, graphene, and conductive metals or inks, may be used in conjunction with polymers to fabricate wearable sensors. Depending on the combination of the materials used, the fatigue behaviors of wearable sensors can vary. Additionally, fatigue testing methodologies for the sensors also vary, with most tests focusing only on the low-cycle fatigue (LCF) regime, and few sensors are cycled until failure or runout are achieved. Fatigue life predictions of wearable sensors are also lacking. These issues make direct comparisons of wearable sensors difficult. To facilitate direct comparisons of wearable sensors and to move proof-of-concept sensors from “bench to bedside,” fatigue testing standards should be established. Further, both high-cycle fatigue (HCF) and failure data are needed to determine the appropriateness in the use, modification, development, and validation of fatigue life prediction models and to further the understanding of how cracks initiate and propagate in wearable sensing technologies.

Sign in / Sign up

Export Citation Format

Share Document