scholarly journals Particle-Size Distribution Models for the Conversion of Chinese Data to FAO/USDA System

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Wei Shangguan ◽  
YongJiu Dai ◽  
Carlos García-Gutiérrez ◽  
Hua Yuan
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Soil Texture ◽  
Texture Classification ◽  
Geometric Mean ◽  
Coefficient Of Determination ◽  
Logistic Growth ◽  
United States Department ◽  
Data Points

We investigated eleven particle-size distribution (PSD) models to determine the appropriate models for describing the PSDs of 16349 Chinese soil samples. These data are based on three soil texture classification schemes, including one ISSS (International Society of Soil Science) scheme with four data points and two Katschinski’s schemes with five and six data points, respectively. The adjusted coefficient of determinationr2, Akaike’s information criterion (AIC), and geometric mean error ratio (GMER) were used to evaluate the model performance. The soil data were converted to the USDA (United States Department of Agriculture) standard using PSD models and the fractal concept. The performance of PSD models was affected by soil texture and classification of fraction schemes. The performance of PSD models also varied with clay content of soils. The Anderson, Fredlund, modified logistic growth, Skaggs, and Weilbull models were the best.

scholarly journals Laser Diffraction as An Innovative Alternative to Standard Pipette Method for Determination of Soil Texture Classes in Central Europe

Water ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1232
Author(s):  
Dušan Igaz ◽  
Elena Aydin ◽  
Miroslava Šinkovičová ◽  
Vladimír Šimanský ◽  
Andrej Tall ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Soil Texture ◽  
Polynomial Regression ◽  
Texture Classification ◽  
Size Fraction ◽  
Laser Diffraction ◽  
Classification Systems ◽  
Particle Size Fraction

The paper presents the comparison of soil particle size distribution determined by standard pipette method and laser diffraction. Based on the obtained results (542 soil samples from 271 sites located in the Nitra, Váh and Hron River basins), regression models were calculated to convert the results of the particle size distribution by laser diffraction to pipette method. Considering one of the most common soil texture classification systems used in Slovakia (according to Novák), the emphasis was placed on the determination accuracy of particle size fraction <0.01 mm. Analysette22 MicroTec plus and Mastersizer2000 devices were used for laser diffraction. Polynomial regression model resulted in the best approximation of measurements by laser diffraction to values obtained by pipette method. In the case of particle size fraction <0.01 mm, the differences between the measured values by pipette method and both laser analyzers ranged in average from 3% up to 9% and from 2% up to 11% in the case of Analysette22 and Mastersizer2000, respectively. After correction, the differences decreased to average 3.28% (Analysette22) and 2.24% (Mastersizer2000) in comparison with pipette method. After recalculation of the data, laser diffraction can be used alongside the sedimentation methods.

X-ray fluorescence spectrometry for rapid screening of particle size in soils

2021 ◽  
Author(s):  
Maame Croffie ◽  
Paul N. Williams ◽  
Owen Fenton ◽  
Anna Fenelon ◽  
Karen Daly
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Soil Texture ◽  
Particle Size Analysis ◽  
Parent Material ◽  
Fluorescence Spectrometry ◽  
Rapid Screening ◽  
Size Analysis ◽  
X Ray

&lt;p&gt;Soil texture is an essential factor for effective land management in agricultural production. Knowledge of soil texture and particle size at field scale can aid with on-going soil management decisions. Standard soil physical and gravimetric methods for particle size analysis are time-consuming and X-ray fluorescence spectrometry (XRF) provides a rapid and cost-effective alternative. The objective of this study was to explore the use of XRF as a predictor for particle size. An extensive archive of Irish soils with particle size and soil texture data was used to select samples for XRF analysis. Regression and correlation analyses on XRF determined results showed that the relationship between Rb and % clay varied with soil type and was dependent on the parent material. There was a strong relationship (R &gt; 0.62, R&lt;sup&gt;2&lt;/sup&gt;&gt;0.30, p&lt;0.05) between Rb and clay for soils originating from bedrock such as limestones and slate. Contrastingly, no significant relationship (R&lt;0.03, R&lt;sup&gt;2&lt;/sup&gt;=0.00, p&gt;0.05) exists between Rb and % clay for soils originating from granite and gneiss. Furthermore, there was a significant negative correlation (p&lt;0.05) between Rb and % sand. The XRF is a useful technique for rough screening of particle size distribution in soils originating from certain parent materials. Thus, this may contribute to the rapid prediction of soil texture based on knowledge of the particle size distribution.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;

scholarly journals Change in Soil Particle Size Distribution and Erodibility with Latitude and Vegetation Restoration Chronosequence on the Loess Plateau, China

2020 ◽  
Vol 17 (3) ◽  
pp. 822 ◽  
Author(s):  
Jiaying Zhai ◽  
Yahui Song ◽  
Wulan Entemake ◽  
Hongwei Xu ◽  
Yang Wu ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Loess Plateau ◽  
Soil Texture ◽  
Steppe Zone ◽  
Soil Erodibility ◽  
The Loess Plateau ◽  
Capacity Dimension ◽  
Restoration Age

Analyzing the dynamics of soil particle size distribution (PSD) and erodibility is important for understanding the changes of soil texture and quality after cropland abandonment. This study aimed to determine how restoration age and latitude affect soil erodibility and the multifractal dimensions of PSD during natural recovery. We collected soil samples from grassland, shrubland, and forests with different restoration ages in the steppe zone (SZ), forest-steppe zone (FSZ), and forest zone (FZ). Various analyses were conducted on the samples, including multifractal analysis and erodibility analysis. Our results showed that restoration age had no significant effect on the multifractal dimensions of PSD (capacity dimension (D0), information dimension (D1), information dimension/capacity dimension ratio (D1/D0), correlation dimension (D2)), and soil erodibility. Multifractal dimensions tended to increase, while soil erodibility tended to decrease, with restoration age. Latitude was negatively correlated with fractal dimensions (D0, D2) and positively correlated with K and D1/D0. During vegetation restoration, restoration age, precipitation, and temperature affect the development of vegetation, resulting in differences in soil organic carbon, total nitrogen, soil texture, and soil enzyme activity, and by affecting soil structure to change the soil stability. This study revealed the impact of restoration age and latitude on soil erosion in the Loess Plateau.

Determination of Particle-Size Distribution and Concentration of Cigarette Smoke by a Light-Scattering Method

1977 ◽  
Vol 9 (3) ◽  
Author(s):  
T. Okada ◽  
Y. Ishizu ◽  
K. Matsunuma
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Cigarette Smoke ◽  
Scattered Light ◽  
Geometric Mean ◽  
Number Concentration ◽  
Scattering Method ◽  
Working Standard

AbstractA new method for determining particle-size distribution of cigarette smoke particles was developed by simultaneous measurement of scattered light at three angles for a fixed wavelength. A theoretical chart useful for this purpose, which was made of the relative intensities of scattered light at the angles 45° and 135° to that at the angle 90°, was calculated on the basis of the Mie theory. The number concentration was determined from the Rayleigh ratio using the working standard method. The measurements were rapidly performed, without change of particle size during measuring time, with a device for dilution. The geometric mean diameter, the logarithmic standard deviation and the number concentration of mainstream smoke were found to be about 0.18 um, 0.4 and 3 X 10

The role of permanent site factors in the assessment of soil treatment effects: A case study with a site preparation trial in jack pine plantations on glacial outwashes

2009 ◽  
Vol 89 (1) ◽  
pp. 81-91 ◽  
Author(s):  
F. Marquis ◽  
D. Paré
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Tree Growth ◽  
Soil Texture ◽  
Quality Index ◽  
Jack Pine ◽  
Site Preparation ◽  
Pine Plantations ◽  
Site Quality

In silvicultural trials, the confounding influence of permanent soil properties is assumed to be minimal. A covariance analysis using total elemental concentrations of parent material (geochemistry) and soil particle size distribution (texture) was used to understand the role that these variables could play in tree growth and foliar nutrient status, and in the growth response to site preparation of 16- to18-yr-old jack pine plantations growing on seemingly homogeneous glacial outwash deposits. Three treatments were tested in a replicated design: direct plantation, and site preparation with TTS or with Bräcke. The combination of particle size distribution and soil geochemistry explained the site quality index (SQI) in control plots (R2 = 0.94) better than soil texture alone. In all plots, SQI was strongly related to K and Mg concentrations in foliage and in humus and, to a lesser degree, to foliar N concentrations. A covariance analysis using soil texture and geochemical composition indicated that while site preparation had an effect on tree growth, the sites that responded the most to site preparation were the ones with the lowest growth potential as determined by soil texture and geochemistry. Key words: Silviculture, site preparation, site quality index, growth, permanent soil factors, texture, geochemistry, nutrition

Size Distributions of Particles Extracted from Different Materials Compared with the MIL-STD-1246 Particle Size Distribution

2000 ◽  
Vol 43 (4) ◽  
pp. 25-29
Author(s):  
Roger Welker
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Geometric Mean ◽  
Industrial Applications ◽  
Distribution Analysis ◽  
Size Distributions ◽  
Naturally Occurring ◽  
History Of ◽  
Log Normal

MIL-STD-1246 particle-size distribution is the basis for specifying the particle cleanliness of surfaces for many governmental and industrial applications. MIL-STD-1246 states that naturally occurring particle contamination on surfaces follows a log-normal particle-size distribution, with a geometric mean of 1 μm, following a very precise size specification. However, the naturally occurring particle-size distribution may be a function of the material under examination or the prior cleaning or surface treatment history of the material. This paper explores the relation between the MIL-STD-1246 particle-size distribution and particle-size distributions measured after extraction followed by liquidborne particle-size distribution analysis.

scholarly journals Particle size distributions from laboratory-scale biomass fires using fast response instruments

2010 ◽  
Vol 10 (16) ◽  
pp. 8065-8076 ◽  
Author(s):  
S. Hosseini ◽  
Q. Li ◽  
D. Cocker ◽  
D. Weise ◽  
A. Miller ◽  
...  
Keyword(s):  
United States ◽  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Geometric Mean ◽  
The United States ◽  
Biomass Combustion ◽  
Size Distributions ◽  
Particle Size Distributions ◽  
Mean Diameter

Abstract. Particle size distribution from biomass combustion is an important parameter as it affects air quality, climate modelling and health effects. To date, particle size distributions reported from prior studies vary not only due to difference in fuels but also difference in experimental conditions. This study aims to report characteristics of particle size distributions in well controlled repeatable lab scale biomass fires for southwestern United States fuels with focus on chaparral. The combustion laboratory at the United States Department of Agriculture-Forest Service's Fire Science Laboratory (USDA-FSL), Missoula, MT provided a repeatable combustion and dilution environment ideal for measurements. For a variety of fuels tested the major mode of particle size distribution was in the range of 29 to 52 nm, which is attributable to dilution of the fresh smoke. Comparing mass size distribution from FMPS and APS measurement 51–68% of particle mass was attributable to the particles ranging from 0.5 to 10 μm for PM10. Geometric mean diameter rapidly increased during flaming and gradually decreased during mixed and smoldering phase combustion. Most fuels produced a unimodal distribution during flaming phase and strong biomodal distribution during smoldering phase. The mode of combustion (flaming, mixed and smoldering) could be better distinguished using the slopes in MCE (Modified Combustion Efficiency) vs. geometric mean diameter than only using MCE values.

scholarly journals Evolution of Aerosol Particles in the Rainfall Process via Method of Moments

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Fangyang Yuan ◽  
Fujun Gan
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Method Of Moments ◽  
Particle Number ◽  
Aerosol Particles ◽  
Geometric Mean ◽  
Number Concentration ◽  
Brownian Diffusion ◽  
Particle Number Concentration

The method of moments is employed to predict the evolution of aerosol particles in the rainfall process. To describe the dynamic properties of particle size distribution, the population balance equation is converted to moment equations by the method of moments and the converted equations are solved numerically. The variations of particle number concentration, geometric mean diameter, and geometric standard deviation are given in the cases that the Brownian diffusion and inertial impaction of particles dominate, respectively. The effects of raindrop size distribution on particle size distribution are analyzed in nine cases. The results show that the particle number concentration decreases as time goes by, and particles dominated by Brownian diffusion are removed more significantly. The particle number concentration decreases much more rapidly when particle geometric mean diameter is smaller, and the particle size distribution tends to be monodisperse. For the same water content, the raindrops with small geometric mean diameters can remove particles with much higher efficiency than those with large geometric mean diameters. Particles in the “Greenfield gap” are relatively difficult to scavenge, and a new method is needed to remove it from the air.

scholarly journals Particle size distributions from laboratory-scale biomass fires using fast response instruments

2010 ◽  
Vol 10 (4) ◽  
pp. 8595-8621 ◽  
Author(s):  
S. Hosseini ◽  
L. Qi ◽  
D. Cocker ◽  
D. Weise ◽  
A. Miller ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Geometric Mean ◽  
Biomass Combustion ◽  
Climate Modelling ◽  
Size Distributions ◽  
Particle Size Distributions ◽  
Mean Diameter ◽  
Particle Sizer

Abstract. Particle size distribution from biomass combustion is an important parameter as it affects air quality, climate modelling and health effects. To date particle size distributions reported from prior studies vary not only due to difference in fuels but also difference in experimental conditions. This study aims to report characteristics of particle size distribution in a well controlled repeatable lab scale biomass fires for southwestern US fuels. The combustion facility at the USDA Forest Service's Fire Science Laboratory (FSL), Missoula, MT provided repeatable combustion and dilution environment ideal for particle size distribution study. For a variety of fuels tested the major mode of particle size distribution was in the range of 29 to 52 nm, which was attributable to dilution of the fresh smoke. Comparing volume size distribution from Fast Mobility Particle Sizer (FMPS) and Aerodynamic Particle Sizer (APS) measurements, ~30% of particle volume was attributable to the particles ranging from 0.5 to 10 μm for PM10. Geometric mean diameter rapidly increased during flaming and gradually decreased during mixed and smoldering phase combustion. Most of fuels gave unimodal distribution during flaming phase and strong biomodal distribution during smoldering phase. The mode of combustion (flaming, mixed and smoldering) could be better distinguished using slopes in Modified Combustion Efficiency (MCE) vs. geometric mean diameter from each mode of combustion than only using MCE values.

Sign in / Sign up

Export Citation Format

Share Document