scholarly journals Scenario Simulation of the Influence of Land Use Change on the Regional Temperature in a Rapidly Urbanizing Region: A Case Study in Southern-Jiangsu, China

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Xinli Ke ◽  
Enjun Ma ◽  
Yongwei Yuan
Keyword(s):  
Land Use ◽  
Heat Flux ◽  
Land Use Change ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Regional Climate ◽  
Radiation Budget ◽  
Net Radiation ◽  
Regional Temperature

It has been shown that land use change in urbanized region, especially urban land expansion, will influence regional climate. However, there has been very little research on the climate effects of the future land use change in a rapidly urbanizing region. Taking the southern part of Jiangsu province in China as the study area and through a scenario analysis, the influence of land use change on the regional temperature was analyzed from the perspective of land surface radiation budget and energy balance. The results indicated that (1) the monthly average temperature is significantly higher under the Rapid Economic Growth (REG) scenario than under the Cooperate Environmental Sustainability (CES) scenario in 2050, especially in the hottest month (July). (2) The range of high-temperature regions is much wider under the REG scenario than it is under the CES scenario in 2050. (3) The land surface net radiation and latent heat flux are two key factors through which land use change influences the regional temperature in the study area, and the latent heat flux plays a dominant role. (4) Land use change mainly influences the land surface net radiation by altering the land surface albedo and emissivity. These results are helpful to mitigate regional climate change effects caused by land use change.

Evaluation of Two Land Surface Schemes Used in Terrains of Increasing Aridity in West Africa

2008 ◽  
Vol 9 (2) ◽  
pp. 173-193 ◽  
Author(s):  
D. Schüttemeyer ◽  
A. F. Moene ◽  
A. A. M. Holtslag ◽  
H. A. R. de Bruin
Keyword(s):  
Heat Flux ◽  
West Africa ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Semiarid Region ◽  
Canopy Conductance ◽  
Net Radiation

Abstract In this study different parameterizations for land surface models currently employed in meteorological models at ECMWF [Tiled ECMWF Surface Scheme for Exchange Processes over Land (TESSEL)] and NCEP (Noah) are evaluated for a semiarid region in Ghana, West Africa. Both schemes utilize the Jarvis–Stewart approach to calculate canopy conductance as the critical variable for partitioning the available energy into sensible and latent heat flux. Additionally, an approach within Noah is tested to calculate canopy conductance based on plant physiology (A-gs method), where the photosynthetic assimilation is coupled to the leaf stomatal conductance. All parameterizations were run offline for a seasonal cycle in 2002/03 using observations as forcings at two test sites. The two locations are in the humid tropical southern region and in the drier northern region. For the purpose of forcing and evaluation, a new set of data has been utilized to include surface fluxes obtained by scintillometry. The measurements include the rapid wet-to-dry transition after the wet season at both sites. As a general trend, it has been found that during the wet period of a season net radiation is described well by all parameterizations. During the drying process the errors in modeled net radiation increased at both sites. The models perform poorly in simulating soil heat fluxes with larger errors for TESSEL for both sites. The evolution in time for sensible heat flux and latent heat flux was tackled in different ways by the utilized parameterizations and sites with enhanced model performance for the more southern site. Soil moisture in the upper soil layers is modeled with small errors for the different parameterizations. Key adjustments for reducing net radiation during the dry period of a season are discussed. In particular, the ratio of roughness length of momentum and heat was found to be an important parameter, but will require seasonal adjustments.

scholarly journals Distinguishing between early- and late-covering crops in the land surface model Noah-MP: impact on simulated surface energy fluxes and temperature

2020 ◽  
Vol 17 (10) ◽  
pp. 2791-2805
Author(s):  
Kristina Bohm ◽  
Joachim Ingwersen ◽  
Josipa Milovac ◽  
Thilo Streck
Keyword(s):  
Land Use ◽  
Heat Flux ◽  
Surface Energy ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Land Surface Model ◽  
Surface Model ◽  
Energy Fluxes ◽  
Surface Energy Fluxes

Abstract. Land surface models are essential parts of climate and weather models. The widely used Noah-MP land surface model requires information on the leaf area index (LAI) and green vegetation fraction (GVF) as key inputs of its evapotranspiration scheme. The model aggregates all agricultural areas into a land use class termed “cropland and pasture”. In a previous study we showed that, on a regional scale, the GVF has a bimodal distribution formed by two crop groups differing in phenology and growth dynamics: early-covering crops (ECC; e.g., winter wheat, winter rapeseed, winter barley) and late-covering crops (LCC; e.g., corn, silage maize, sugar beet). That result can be generalized for central Europe. The present study quantifies the effect of splitting the land use class cropland and pasture of Noah-MP into ECC and LCC on surface energy fluxes and temperature. We further studied the influence of increasing the LCC share, which in the study area (the Kraichgau region, southwest Germany) is mainly the result of heavily subsidized biomass production, on energy partitioning at the land surface. We used the GVF dynamics derived from high-resolution (5 m × 5 m) RapidEye satellite data and measured LAI data for the simulations. Our results confirm that the GVF and LAI strongly influence the partitioning of surface energy fluxes, resulting in pronounced differences between simulations of ECC and LCC. Splitting up the generic crop into ECC and LCC had the strongest effect on land surface exchange processes in July–August. During this period, ECC are at the senescence growth stage or already harvested, while LCC have a well-developed ground-covering canopy. The generic crop resulted in humid bias, i.e., an increase in evapotranspiration by +0.5 mm d−1 (latent heat flux is 1.3 MJ m−2 d−1), decrease in sensible heat flux (H) by 1.2 MJ m−2  d−1 and decrease in surface temperature by −1 ∘C. The bias increased as the shares of ECC and LCC became similar. The observed differences will impact the simulations of processes in the planetary boundary layer. Increasing the LCC share from 28 % to 38 % in the Kraichgau region led to a decrease in latent heat flux (LE) and a heating up of the land surface in the early growing season. Over the second part of the season, LE increased and the land surface cooled down by up to 1 ∘C.

scholarly journals Quantifying the Contribution of LUCC to Surface Energy Budget: A Case Study of Four Typical Cities in the Yellow River Basin in China

Atmosphere ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1374
Author(s):  
Qian Chi ◽  
Shenghui Zhou ◽  
Lijun Wang ◽  
Mengyao Zhu ◽  
Dandan Liu ◽  
...  
Keyword(s):  
Land Use ◽  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Human Activities ◽  
Yellow River ◽  
Yellow River Basin ◽  
The Yellow River ◽  
Net Radiation ◽  
The Yellow River Basin

With social changes and economic development, human activities inevitably lead to significant changes in land use types. Land use and land cover change (LUCC) leads to a series of changes in energy balance and surface temperature, which has an impact on the regional climate. In this study, MODIS remote sensing data were used to quantify the results of the biological and geophysical effects caused by LUCC in four typical cities in the Yellow River Basin of China: Jinan, Zhengzhou, Lanzhou and Xining. The results showed the following: (1) The latent heat flux and the net radiation of the four cities were both increasing on the whole. The latent heat flux of water and forest was higher, which played a key role in energy consumption on the ground. The net radiation value of the old urban and urban expansion areas was higher, while that of the forest was lower, which indicated that human activities increased the input of surface energy. (2) The differences between latent heat flux and net radiation in areas greatly affected by human activities were much smaller than those in natural areas such as forest and grassland. This indicted that human activities increased the warming trend. In addition, most of the differences between latent heat flux and net radiation in the four cities showed a downward trend. (3) Different cities have different regulating factors for land surface temperature (LST). In Jinan and Zhengzhou, the regulation of LST by net radiation was more obvious, while in Lanzhou and Xining, the regulation of LST by latent heat flux was more pronounced. By comparing LUCC and the forced balance between energy intake and consumption in four typical cities along the Yellow River Basin, this study emphasizes the difference of energy budgets under different land use types, which has important reference value for judging the spatial difference of urban thermal environments.

scholarly journals The Sensitivity of Latent Heat Flux to Changes in the Radiative Forcing: A Framework for Comparing Models and Observations

2010 ◽  
Vol 23 (9) ◽  
pp. 2345-2356 ◽  
Author(s):  
Jonathan M. Winter ◽  
Elfatih A. B. Eltahir
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Radiative Forcing ◽  
Climate Model ◽  
Regional Climate ◽  
Surface Model ◽  
Transfer Scheme ◽  
Available Energy

Abstract A climate model must include an accurate surface physics scheme in order to examine the interactions between the land and atmosphere. Given an increase in the surface radiative forcing, the sensitivity of latent heat flux to available energy plays an important role in determining the energy budget and has a significant impact on the response of surface temperature. The Penman–Monteith equation is used to construct a theoretical framework for evaluating the climatology of evapotranspiration and the sensitivity of latent heat flux to available energy. Regional Climate Model version 3 coupled to Integrated Biosphere Simulator (RegCM3–IBIS); RegCM3 with its native land surface model, Biosphere–Atmosphere Transfer Scheme 1e (RegCM3–BATS1e); and Flux Network (FLUXNET) micrometeorological tower observations are compared and contrasted using the developed methodology. RegCM3–IBIS and RegCM3–BATS1e simulate the observed sensitivity of latent heat flux to available energy reasonably well during the summer on average; however, there are significant variations in the monthly values. Additional information provided by the physically based Penman–Monteith framework is employed for identifying deficiencies and guiding improvements in models, allowing calibration of both the climatology of evapotranspiration and the sensitivity of latent heat flux to available energy.

The Effect of Soil on the Summertime Surface Energy Budget of a Humid Subarctic Tundra in Northern Quebec, Canada

2021 ◽  
Vol 22 (10) ◽  
pp. 2547-2564
Author(s):  
Georg Lackner ◽  
Daniel F. Nadeau ◽  
Florent Domine ◽  
Annie-Claude Parent ◽  
Gonzalo Leonardini ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Arctic Region ◽  
Heat Fluxes ◽  
Surface Energy Budget ◽  
Turbulent Heat ◽  
Turbulent Heat Fluxes

AbstractRising temperatures in the southern Arctic region are leading to shrub expansion and permafrost degradation. The objective of this study is to analyze the surface energy budget (SEB) of a subarctic shrub tundra site that is subject to these changes, on the east coast of Hudson Bay in eastern Canada. We focus on the turbulent heat fluxes, as they have been poorly quantified in this region. This study is based on data collected by a flux tower using the eddy covariance approach and focused on snow-free periods. Furthermore, we compare our results with those from six Fluxnet sites in the Arctic region and analyze the performance of two land surface models, SVS and ISBA, in simulating soil moisture and turbulent heat fluxes. We found that 23% of the net radiation was converted into latent heat flux at our site, 35% was used for sensible heat flux, and about 15% for ground heat flux. These results were surprising considering our site was by far the wettest site among those studied, and most of the net radiation at the other Arctic sites was consumed by the latent heat flux. We attribute this behavior to the high hydraulic conductivity of the soil (littoral and intertidal sediments), typical of what is found in the coastal regions of the eastern Canadian Arctic. Land surface models overestimated the surface water content of those soils but were able to accurately simulate the turbulent heat flux, particularly the sensible heat flux and, to a lesser extent, the latent heat flux.

scholarly journals Inter-comparison of two land-surface models applied at different scales and their feedbacks while coupled with a regional climate model

2012 ◽  
Vol 16 (3) ◽  
pp. 1017-1031 ◽  
Author(s):  
F. Zabel ◽  
W. Mauser ◽  
T. Marke ◽  
A. Pfeiffer ◽  
G. Zängl ◽  
...  
Keyword(s):  
Land Use ◽  
Land Surface ◽  
Regional Climate ◽  
Moderate Increase ◽  
Net Radiation ◽  
Land Surface Models ◽  
Near Surface ◽  
Temporal Behaviour ◽  
Surface Models ◽  
The Alps

Abstract. Downstream models are often used in order to study regional impacts of climate and climate change on the land surface. For this purpose, they are usually driven offline (i.e., 1-way) with results from regional climate models (RCMs). However, the offline approach does not allow for feedbacks between these models. Thereby, the land surface of the downstream model is usually completely different to the land surface which is used within the RCM. Thus, this study aims at investigating the inconsistencies that arise when driving a downstream model offline instead of interactively coupled with the RCM, due to different feedbacks from the use of different land surface models (LSM). Therefore, two physically based LSMs which developed from different disciplinary backgrounds are compared in our study: while the NOAH-LSM was developed for the use within RCMs, PROMET was originally developed to answer hydrological questions on the local to regional scale. Thereby, the models use different physical formulations on different spatial scales and different parameterizations of the same land surface processes that lead to inconsistencies when driving PROMET offline with RCM output. Processes that contribute to these inconsistencies are, as described in this study, net radiation due to land use related albedo and emissivity differences, the redistribution of this net radiation over sensible and latent heat, for example, due to different assumptions about land use impermeability or soil hydraulic reasons caused by different plant and soil parameterizations. As a result, simulated evapotranspiration, e.g., shows considerable differences of max. 280 mm yr−1. For a full interactive coupling (i.e., 2-way) between PROMET and the atmospheric part of the RCM, PROMET returns the land surface energy fluxes to the RCM and, thus, provides the lower boundary conditions for the RCM subsequently. Accordingly, the RCM responses to the replacement of the LSM with overall increased annual mean near surface air temperature (+1 K) and less annual precipitation (−56 mm) with different spatial and temporal behaviour. Finally, feedbacks can set up positive and negative effects on simulated evapotranspiration, resulting in a decrease of evapotranspiration South of the Alps a moderate increase North of the Alps. The inconsistencies are quantified and account for up to 30% from July to Semptember when focused to an area around Milan, Italy.

Sensitivity of Latent Heat Flux from PILPS Land-Surface Schemes to Perturbations of Surface Air Temperature

1998 ◽  
Vol 55 (11) ◽  
pp. 1909-1927 ◽  
Author(s):  
Weiqing Qu ◽  
A. Henderson-Sellers ◽  
A. J. Pitman ◽  
T. H. Chen ◽  
F. Abramopoulos ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Air Temperature ◽  
Land Surface ◽  
Surface Air Temperature

Characteristics of Long-term Surface Heat Source and Its Climate Influence Factors in Central Tibetan Plateau

2021 ◽  
Author(s):  
Zeyong Hu ◽  
Xiaoqiang Yan
Keyword(s):  
Heat Flux ◽  
Heat Source ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Sensible Heat ◽  
Net Radiation ◽  
Maximum Value

<p>Based on multi-level AWS data during 2001 to 2015 and eddy covariance data during 2011 to 2014 at Nagqu Station of Plateau Climate and Environment, the turbulent fluxes were calculated by a surface energy balance combination (CM) and eddy covariance ( EC) method. A long-term heat fluxes and surface heat source were obtained with comparison and correction of EC and CM fluxes. The surface energy closure ratio is close to 1 in spring, summer and autumn. But it reaches to 1.34 in winter due to low net radiation observation value on snow surface. The sensible heat flux shows a ascend trend while latent heat flux shows a descend trend during 2002 to 2015. The surface heat source shows a descend trend. The analysis of the surface heat source indicates that it has a significant relationship with net radiation flux, surface temperature, soil moisture and wind speed. Particularly, the surface heat source has a significant response to net radiation flux throughout the year. There are obvious influences of surface temperature and soil moisture on the surface heat source in spring, autumn and winter. And the influence of wind speeds on surface heat source is strong only in spring. The annual variation of sensible heat flux and latent heat flux are obvious. Sensible heat flux reaches the maximum value of the year in April and the minimum value in July. however, latent heat flux shows the maximum value in July and the minimum value in January. </p>

scholarly journals Diurnal Energy Balance in a Mango Orchard in the Northeast of Pará, Brazil

2018 ◽  
Vol 33 (3) ◽  
pp. 537-546 ◽  
Author(s):  
Paulo Jorge de Oliveira Ponte de Souza ◽  
Juliana Chagas Rodrigues ◽  
Adriano Marlisom Leão de Sousa ◽  
Everaldo Barreiros de Souza
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Soil Cover ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Net Radiation ◽  
Growing Seasons ◽  
Available Energy

Abstract This study aimed to evaluate the diurnal energy balance during the reproductive stage of two growing seasons of a mango orchard in the northeast of Pará, Brazil. Therefore, a micrometeorological tower was installed and instrumented, in the center of the experimental area, to monitor meteorological variables, besides the phenological evaluation of the mango orchard, which was carried out during growing seasons of 2010-2011 (October 2010 to January 2011) and of 2011-2012 (September 2011 to January 2012). The energy balance was obtained by the bowen ration technique, and the available energy partitioned into heat flux to the ground, sensible heat and latent heat. The amount of rainfall was crucial to the partition of the net radiation in the energy balance components. It provided the variation in the consumption of available energy between 69% and 78% as latent heat flux, and between 23% and 32% as sensible heat flux. The heat flux to the ground was small, representing less than 1% of the net radiation, showing that the mango orchard exhibits good soil cover preventing large variations in soil heating.

scholarly journals Simulation of Land Surface Climate over China with RegCM4.5: Verification and Analysis

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Minghao Yang ◽  
Ruiting Zuo ◽  
Liqiong Wang ◽  
Xiong Chen
Keyword(s):  
Heat Flux ◽  
Soil Moisture ◽  
Surface Temperature ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface Temperature ◽  
South China ◽  
Land Surface ◽  
Reanalysis Data ◽  
Surface Evaporation

The ability of RegCM4.5 using land surface scheme CLM4.5 to simulate the physical variables related to land surface state was investigated. The NCEP-NCAR reanalysis data for the period 1964–2003 were used to drive RegCM4.5 to simulate the land surface temperature, precipitation, soil moisture, latent heat flux, and surface evaporation. Based on observations and reanalysis data, a few land surface variables were analyzed over China. The results showed that some seasonal features of land surface temperature in summer and winter as well as its magnitude could be simulated well. The simulation of precipitation was sensitive to region and season. The model could, to a certain degree, simulate the seasonal migration of rainband in East China. The overall spatial distribution of the simulated soil moisture was better in winter than in summer. The simulation of latent heat flux was also better in winter. In summer, the latent heat flux bias mainly arose from surface evaporation bias in Northwest China, and it primarily arose from vegetation evapotranspiration bias in South China. In addition, the large latent heat flux bias in South China during summer was probably due to less precipitation generated in the model and poor representation of vegetation cover in this region.

Sign in / Sign up

Export Citation Format

Share Document