scholarly journals Photocatalysis of WO3Nanoplates Synthesized by Conventional-Hydrothermal and Microwave-Hydrothermal Methods and of Commercial WO3Nanorods

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Jarupat Sungpanich ◽  
Titipun Thongtem ◽  
Somchai Thongtem
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Hydrothermal ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Bet Analysis ◽  
Uv Visible ◽  
Hydrothermal Methods

The degradation of methylene blue (MB) dye by tungsten oxide (WO3) photocatalyst synthesized by the 200°C conventional-hydrothermal (C-H) and 270 W microwave-hydrothermal (M-H) methods and commercial WO3was studied under UV light irradiation for 360 min. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectrophotometry, and UV visible spectroscopy to determine phase, morphology, vibration mode, and optical property. The BET analysis revealed the specific surface area of 29.74, 37.25, and 33.56 m2/g for the C-H WO3nanoplates, M-H WO3nanoplates, and commercial WO3nanorods, respectively. In this research, the M-H WO3nanoplates have the highest photocatalytic efficiency of 90.07% within 360 min, comparing to the C-H WO3nanoplates and even commercial WO3nanorods.

Solvothermal Synthesis of Novel 3D Peony-Like TiO2 Microstructures and its Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (05) ◽  
pp. 1850056 ◽  
Author(s):  
Yugan He ◽  
Qi Yan ◽  
Xiaoyu Chang ◽  
Meiying Zhu ◽  
Weiwei Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Irradiation Power ◽  
Degussa P25

A TiO2 photocatalyst with peony-like microstructures and a large percentage of exposed {001} facets was synthesized using a facile solvethermal method. The peony-like TiO2 was obtained using HF as a capping agent, TiCl4 as the precursor and ethanol as the solvothermal agent. The parameters which influence the mophology and formation mechanism of the products including the HF concentration, the reaction time and temperature and the solvothermal solvent, were investigated. The samples were characterized using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption analysis. As the reaction time or reaction temperature increased, the morphology TiO2 changed from hexagonally assembled microspheres to peony-like microflowers which were composed of stacks of ultrathin nanosheets. The other reaction parameters also play a crucial role in the formation of the TiO2 microstuctures. Photocatalytic experiments showed that the synthesized TiO2 outperformed Degussa P25 in the photodegradation of methelene blue under a very weak UV light irradiation (power: 8[Formula: see text]W, light intensity: 0.4[Formula: see text]mW[Formula: see text]cm[Formula: see text]).

Hydrothermal Synthesis and Photocatalytic Properties of ZnO Nanorods

2011 ◽  
Vol 374-377 ◽  
pp. 956-959
Author(s):  
Li Yun Yang ◽  
Gui Peng Feng ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance ◽  
Uv Light ◽  
Zno Nanorods ◽  
Distilled Water ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Degradation Of Methyl Orange

ZnO2 nanorods were synthesized via hydrothermal treatment of 2ZnCO3•3Zn(OH)2 powder in 30 mass% H2O2 aqueous solution at 170 °C for 12 h, and characterized by means of X-ray diffraction, transmission electron microscopy and UV–vis diffuse reflectance spectra. Besides, the photocatalytic activity of the as-synthesized ZnO2 nanorods was tested for the degradation of methyl orange in distilled water under UV light irradiation.

Hydrothermal Synthesis, Characterization and Photocatalytic Properties of Zn/Sn-Composite Oxides

2010 ◽  
Vol 148-149 ◽  
pp. 1204-1207
Author(s):  
Jing Hu ◽  
Ming Guo Ma ◽  
Jian Zhang Li
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Hydrothermal Temperature ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Composite Oxides ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Degradation Of Methyl Orange

The Zn/Sn-composite oxide nanogranules were synthesized via a simple hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the hydrothermal temperature significantly influences the morphology, microstructure, and composition of the as-prepared samples. And the nano-sized ZnO/Zn2SnO4 exhibited high photocatalytic activities on the degradation of methyl orange (MO) under ultraviolet (UV) light irradiation.

Sonochemistry: a good, fast and clean method to promote the removal of Cu(ii) and Cr(vi) by MWCNT/CoFe2O4@PEI nanocomposites: optimization study

2018 ◽  
Vol 42 (19) ◽  
pp. 16307-16328 ◽  
Author(s):  
Mohammad Hassan Omidi ◽  
Mohammad Hossein Ahmadi Azqhandi ◽  
Bahram Ghalami-Choobar
Keyword(s):  
Electron Microscopy ◽  
X Ray Diffraction ◽  
Multiwalled Carbon ◽  
X Ray ◽  
Transmission Electron ◽  
Optimization Study ◽  
Bet Analysis ◽  
Branched Polyethylenimine ◽  
Magnetic Multiwalled Carbon Nanotubes ◽  
Scanning Electron

In this study, branched polyethylenimine (PEI) loaded on magnetic multiwalled carbon nanotubes (MWCNT/CoFe2O4) was synthesized and characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) analysis and Fourier transform infrared spectroscopy (FTIR).

scholarly journals Hydrothermal synthesis of ZnO quantum dot/KNb3O8 nanosheet photocatalysts for reducing carbon dioxide to methanol

2017 ◽  
Vol 8 ◽  
pp. 2264-2270 ◽  
Author(s):  
Xiao Shao ◽  
Weiyue Xin ◽  
Xiaohong Yin
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Uv Light ◽  
Formation Rate ◽  
X Ray Diffraction ◽  
Methanol Production ◽  
X Ray ◽  
Transmission Electron ◽  
Methanol Formation ◽  
Zno Quantum Dots

ZnO quantum dots and KNb3O8 nanosheets were synthesized by a two-step hydrothermal method for the photocatalytic reduction of CO2 to methanol where isopropanol is simultaneously oxidized to acetone . The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis absorption spectroscopy (UV–vis). The photocatalytic activity of the materials was evaluated by formation rate of methanol under UV light irradiation at ambient temperature and pressure. The methanol formation rate of pure KNb3O8 nanosheets was found to be 1257.21 μmol/g/h, and after deposition of 2 wt % ZnO quantum dots on the surface of KNb3O8 nanosheets, the methanol production rate was found to increase to 1539.77 μmol/g/h. Thus, the ZnO quantum dots obviously prompted separation of charge carriers, which was explained by a proposed mechanism for this photocatalytic reaction.

Mixed-Solvothermal Preparation of Mace-Like CdS Nanocrystals

2012 ◽  
Vol 502 ◽  
pp. 164-168
Author(s):  
Ling Xu ◽  
Han Mei Hu ◽  
Hai Yan Xu
Keyword(s):  
Electron Microscopy ◽  
Large Scale ◽  
Volume Ratio ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures ◽  
Uv Visible ◽  
Solvothermal Preparation

Novel mace-like (wolf-teeth clubs) CdS nanostructures were successfully prepared on a large scale using CdCl2•2.5H2O and NH2CSNH2 as starting materials through a convenient mixed-solvothermal route. The as-synthesized products were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDX), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and UV-visible absorption spectroscopy. The experimental results reveal that the morphology of CdS products was greatly affected by the volume ratio of anhydrous ethanol and distilled water. The possible mechanism for the formation of mace-like CdS nanostructures is simply discussed.

scholarly journals Synthesis, Characterization, and Photocatalytic Performance of Mesoporous α-Mn2O3 Microspheres Prepared via a Precipitation Route

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Manoj Pudukudy ◽  
Zahira Yaakob
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
Thermal Transformation ◽  
Xrd Analysis ◽  
Structural Deformation ◽  
Blue Dye ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
X Ray ◽  
Transmission Electron

α-Mn2O3 microspheres with high phase purity, crystallinity, and surface area were synthesized by the thermal decomposition of precipitated MnCO3 microspheres without the use of any structure directing agents and tedious reaction conditions. The prepared Mn2O3 microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) and photoluminescence (PL) studies. The complete thermal transformation of MnCO3 to Mn2O3 was clearly shown by the FTIR and XRD analysis. The electron microscopic images clearly confirmed the microsphere-like morphology of the products with some structural deformation for the calcined Mn2O3 sample. The mesoporous texture generated from the interaggregation of subnanoparticles in the microstructures is visibly evident from the TEM and BET studies. Moreover, the Mn2O3 microstructures showed a moderate photocatalytic activity for the degradation of methylene blue dye pollutant under UV light irradiation, using air as the potential oxidizing agent.

A Facile Method for the Synthesis of Silver Nanoparticles in the Presence of Sodium Phosphate

2011 ◽  
Vol 109 ◽  
pp. 174-177 ◽  
Author(s):  
Yu Li Shi ◽  
Qi Zhou ◽  
Li Yun Lv ◽  
Wang Hong
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Sodium Phosphate ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Stabilizing Agents ◽  
Transmission Electron ◽  
Silver Nps ◽  
Uv Visible

A facile method for the synthesis of silver nanoparticles (NPs) has been developed by using sodium phosphate (Na3PO4) as stabilizing agents and glucose the reducing agent, respectively. The obtained silver NPs have been characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis) and transmission electron microscopy (TEM). It was found that in the presence of sodium phosphate, silver NPs with different morphologies and sizes were obtained. The formation mechanism of diverse silver NPs was studied preliminarily.

Optical and Structural Properties of PVP/Bi2S3 Nanoparticles by Chemical Method

2013 ◽  
Vol 678 ◽  
pp. 248-252
Author(s):  
K. Kavi Rasu ◽  
Dhandapani Vishnushankar ◽  
V. Veeravazhuthi
Keyword(s):  
Electron Microscopy ◽  
Diffraction Spectrum ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Ir Studies ◽  
Transmission Electron ◽  
Ft Ir ◽  
Crystalline Nature ◽  
Uv Visible

Bismuth sulfide (Bi2S3) and Polyvinyl pyrrolidone (PVP) encapsulated Bi2S3 Nanoparticles are synthesized from aqueous solutions at room temperature. Synthesized samples are subjected to UV-Visible Spectroscopy, X-Ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive Analysis of X-ray (EDAX), Transmission Electron Microscopy (TEM) and FT-IR studies and their results are compared. X-ray diffraction spectrum reveals the crystalline nature of the synthesized samples. Grain size value of PVP/ Bi2S3 nanoparticles show a decrease when compared to Bi2S3 nanoparticles and this ensures the good encapsulant effect of PVP on Bi2S3 nanoparticles. SEM images show that all the particles in the synthesized sample are nearly equal in size. From the TEM image we conclude that the particle size lies between 30nm to 70nm. Finally the samples are subjected to EDAX studies for determining their composition.

Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures

2011 ◽  
Vol 335-336 ◽  
pp. 460-463 ◽  
Author(s):  
Hong Mei Wang ◽  
Da Peng Zhou ◽  
Yuan Lian ◽  
Ming Pang ◽  
Dan Liu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures

Hexagonal flower-like CdS nanostructures were successfully synthesized through a facile hydrothermal method with thiourea as sulfur source. By combining the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), the structural and morphological characterizations of the products were performed. The photocatalytic activity of CdS nanostructures had been tested by degradation of Rhodamine B (RB) under UV light compared to commercial CdS powders, which indicated that the as-syntherized CdS nanostructures exhibited enhanced photocatalytic activity for degradation of RB. The possible growth mechanism of CdS nanostructures was proposed in the end.

Sign in / Sign up

Export Citation Format

Share Document