Hydrothermal Synthesis and Photocatalytic Properties of ZnO Nanorods

2011 ◽  
Vol 374-377 ◽  
pp. 956-959
Author(s):  
Li Yun Yang ◽  
Gui Peng Feng ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance ◽  
Uv Light ◽  
Zno Nanorods ◽  
Distilled Water ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Degradation Of Methyl Orange

ZnO2 nanorods were synthesized via hydrothermal treatment of 2ZnCO3•3Zn(OH)2 powder in 30 mass% H2O2 aqueous solution at 170 °C for 12 h, and characterized by means of X-ray diffraction, transmission electron microscopy and UV–vis diffuse reflectance spectra. Besides, the photocatalytic activity of the as-synthesized ZnO2 nanorods was tested for the degradation of methyl orange in distilled water under UV light irradiation.

Hydrothermal Synthesis, Characterization and Photocatalytic Properties of Zn/Sn-Composite Oxides

2010 ◽  
Vol 148-149 ◽  
pp. 1204-1207
Author(s):  
Jing Hu ◽  
Ming Guo Ma ◽  
Jian Zhang Li
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Hydrothermal Temperature ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Composite Oxides ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Degradation Of Methyl Orange

The Zn/Sn-composite oxide nanogranules were synthesized via a simple hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the hydrothermal temperature significantly influences the morphology, microstructure, and composition of the as-prepared samples. And the nano-sized ZnO/Zn2SnO4 exhibited high photocatalytic activities on the degradation of methyl orange (MO) under ultraviolet (UV) light irradiation.

Solvothermal Synthesis of Novel 3D Peony-Like TiO2 Microstructures and its Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (05) ◽  
pp. 1850056 ◽  
Author(s):  
Yugan He ◽  
Qi Yan ◽  
Xiaoyu Chang ◽  
Meiying Zhu ◽  
Weiwei Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Irradiation Power ◽  
Degussa P25

A TiO2 photocatalyst with peony-like microstructures and a large percentage of exposed {001} facets was synthesized using a facile solvethermal method. The peony-like TiO2 was obtained using HF as a capping agent, TiCl4 as the precursor and ethanol as the solvothermal agent. The parameters which influence the mophology and formation mechanism of the products including the HF concentration, the reaction time and temperature and the solvothermal solvent, were investigated. The samples were characterized using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption analysis. As the reaction time or reaction temperature increased, the morphology TiO2 changed from hexagonally assembled microspheres to peony-like microflowers which were composed of stacks of ultrathin nanosheets. The other reaction parameters also play a crucial role in the formation of the TiO2 microstuctures. Photocatalytic experiments showed that the synthesized TiO2 outperformed Degussa P25 in the photodegradation of methelene blue under a very weak UV light irradiation (power: 8[Formula: see text]W, light intensity: 0.4[Formula: see text]mW[Formula: see text]cm[Formula: see text]).

Preparation of SnO2-TiO2/Zeolite Y Composites with Enhanced Photocatalytic Activity

2016 ◽  
Vol 852 ◽  
pp. 1493-1498 ◽  
Author(s):  
Jing Yang ◽  
Xiao Wen Xu
Keyword(s):  
Diffuse Reflectance ◽  
Zeolite Y ◽  
Uv Light ◽  
Tetrabutyl Titanate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tin Chloride ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Subsequent Calcination

SnO2-TiO2/zeolite Y composites were prepared by the impregnation of tin chloride and tetrabutyl titanate solution with zeolite Y and subsequent calcination at 500. SnO2-TiO2 heterostructures coated on zeolite Y is ascertained by X-ray diffraction, high-resolution transmission electron microscopy and UV-vis diffuse reflectance spectra characterization. The photocatalytic studies suggested that the SnO2-TiO2/zeolite Y showed enhanced photocatalytic efficiency of photodegradation of methyl orange compared with TiO2/ zeolite Y and SnO2/zeolite Y under UV light irradiation.

A Novel CuO-TiO2 Composite Photocatalyst and its Degradation of Methyl Orange under UV Irradiation

2011 ◽  
Vol 295-297 ◽  
pp. 1129-1132 ◽  
Author(s):  
Shi De Wu ◽  
You Qi Zhu ◽  
Chao Li ◽  
Ying Liang Wei
Keyword(s):  
Electron Microscopy ◽  
Methyl Orange ◽  
Uv Light ◽  
Sol Gel ◽  
High Catalytic Activity ◽  
X Ray Diffraction ◽  
Composite Photocatalyst ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Degradation Of Methyl Orange

A novel CuO-TiO2 composite photocatalyst was prepared by a redox process coupling with sol-gel method. The morphology and structure of the as-prepared samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Photocatalytic activity of the CuO-TiO2 composite photocatalyst was evaluated in terms of the degradation of Methyl orange (MO) in aqueous solution under UV light irradiation. The results show that the as-prepared composite consisted of monoclinic-phase CuO-nanotubes and TiO2 nanoparticles, in which TiO2 nanoparticles were dramatically decorated on the CuO-nanotubes, exhibits a high catalytic activity to decolorize MO. According to the experimental results, 1.27wt % was the optimal loading for CuO-doped TiO2 photocatalyst.

scholarly journals Photocatalysis of WO3Nanoplates Synthesized by Conventional-Hydrothermal and Microwave-Hydrothermal Methods and of Commercial WO3Nanorods

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Jarupat Sungpanich ◽  
Titipun Thongtem ◽  
Somchai Thongtem
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Hydrothermal ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Bet Analysis ◽  
Uv Visible ◽  
Hydrothermal Methods

The degradation of methylene blue (MB) dye by tungsten oxide (WO3) photocatalyst synthesized by the 200°C conventional-hydrothermal (C-H) and 270 W microwave-hydrothermal (M-H) methods and commercial WO3was studied under UV light irradiation for 360 min. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectrophotometry, and UV visible spectroscopy to determine phase, morphology, vibration mode, and optical property. The BET analysis revealed the specific surface area of 29.74, 37.25, and 33.56 m2/g for the C-H WO3nanoplates, M-H WO3nanoplates, and commercial WO3nanorods, respectively. In this research, the M-H WO3nanoplates have the highest photocatalytic efficiency of 90.07% within 360 min, comparing to the C-H WO3nanoplates and even commercial WO3nanorods.

Synthesis and Characterization of Lead Sulfide Nanostructures with Different Morphologies via Simple Hydrothermal Method

2016 ◽  
Vol 35 (6) ◽  
pp. 559-566 ◽  
Author(s):  
Elaheh Esmaeili ◽  
Mohammad Sabet ◽  
Masoud Salavati-Niasari ◽  
Kamal Saberyan
Keyword(s):  
Electron Microscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Product Size ◽  
X Ray ◽  
Transmission Electron ◽  
Hydrothermal Approach ◽  
Size And Morphology

AbstractPbS nanostructures were synthesized successfully via hydrothermal approach with a new precursor. The products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–Vis diffuse reflectance spectroscopy (DRS). The effect of different sulfur sources were investigated on product size and morphology.

Hydrothermal Synthesis of Hexagonal Phase Zn1-XMnxS (x = 0–0.05) Nanorods Using Single-Source Precursors

2010 ◽  
Vol 663-665 ◽  
pp. 100-103
Author(s):  
Zhen Ni Du ◽  
Yong Cai Zhang ◽  
Zhi You Xu ◽  
Ming Zhang
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
Diffuse Reflectance ◽  
Hexagonal Phase ◽  
Single Source ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

The synthesis of hexagonal phase Zn1-xMnxS (x = 0–0.05) nanorods was achieved by hydrothermal treatment of zinc manganese diethyldithiocarbamates (Zn1-xMnx-(DDTC)2, x=0–0.05) in 40 mass % hydrate hydrazine aqueous solution at 180 °C for 12 h. The structure, composition and optical property of the obtained products were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis diffuse reflectance spectra.

scholarly journals Hydrothermal synthesis of ZnO quantum dot/KNb3O8 nanosheet photocatalysts for reducing carbon dioxide to methanol

2017 ◽  
Vol 8 ◽  
pp. 2264-2270 ◽  
Author(s):  
Xiao Shao ◽  
Weiyue Xin ◽  
Xiaohong Yin
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Uv Light ◽  
Formation Rate ◽  
X Ray Diffraction ◽  
Methanol Production ◽  
X Ray ◽  
Transmission Electron ◽  
Methanol Formation ◽  
Zno Quantum Dots

ZnO quantum dots and KNb3O8 nanosheets were synthesized by a two-step hydrothermal method for the photocatalytic reduction of CO2 to methanol where isopropanol is simultaneously oxidized to acetone . The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis absorption spectroscopy (UV–vis). The photocatalytic activity of the materials was evaluated by formation rate of methanol under UV light irradiation at ambient temperature and pressure. The methanol formation rate of pure KNb3O8 nanosheets was found to be 1257.21 μmol/g/h, and after deposition of 2 wt % ZnO quantum dots on the surface of KNb3O8 nanosheets, the methanol production rate was found to increase to 1539.77 μmol/g/h. Thus, the ZnO quantum dots obviously prompted separation of charge carriers, which was explained by a proposed mechanism for this photocatalytic reaction.

Preparation and Spectral Properties of PVP-Modified ZnO Nanorods

2008 ◽  
Vol 368-372 ◽  
pp. 329-332 ◽  
Author(s):  
Yang Feng Huang ◽  
Han Ning Xiao ◽  
Shu Guang Chen
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Reaction ◽  
Uv Spectroscopy ◽  
Zno Nanorods ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Emission ◽  
Transmission Electron ◽  
Light Region ◽  
Uv Absorption Spectrum

ZnO nanorods were prepared by a hydrothermal reaction in the presence or absence of PVP (polyvinyl pyrrolidone). The obtained products were characterized by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, UV-Vis absorption (UV) spectroscopy and photoluminescence (PL) spectroscopy. The results suggest that PVP plays an important role in the preparation of ZnO nanorods. The UV absorption spectrum showed PVP increases the UV-shielding ability but doesn’t influence the transparency in the visible light region. A weak UV emission at 353 nm of PL spectra exhibit the surface of ZnO nanorods is passivated and oxygen-related defects is supplied by PVP.

Synthesis of ZnO Nanorods with Tunable Aspect Ratio

2012 ◽  
Vol 724 ◽  
pp. 205-208
Author(s):  
Li Yan Zhang ◽  
Fen Wang ◽  
Jian Feng Zhu
Keyword(s):  
Electron Microscopy ◽  
Aspect Ratio ◽  
Ph Value ◽  
Zno Nanorods ◽  
Heat Treating ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preferred Direction ◽  
Transmission Electron ◽  
Scanning Electron

ZnO nanorods were prepared by heat treating of aqueous zinc acetate treated with organic of PVA. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM). The results indicate that the as synthesized ZnO are hexagonal wurtzite nanorods with the maximum aspect ratio of 10:1 (100 nm in diameter and about 1 μm in length). The morphology of nanorods was formed by the regulation of appropriate organic under a pH value of 8.5. The growth mechanism of ZnO is proposed that the nanocrystals grow along a preferred direction in a growth tunnel provided by organics.

Sign in / Sign up

Export Citation Format

Share Document