scholarly journals An Improved Approach for Reduction of Defect Density Using Optimal Module Sizes

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Dinesh Verma ◽  
Shishir Kumar
Keyword(s):  
Goodness Of Fit ◽  
Defect Density ◽  
Optimal Size ◽  
Data Sets ◽  
Density Parameter ◽  
Proposed Model ◽  
Module Size ◽  
Curve Fitting Method ◽  
Improved Model ◽  
Effective Distribution

Nowadays, software developers are facing challenges in minimizing the number of defects during the software development. Using defect density parameter, developers can identify the possibilities of improvements in the product. Since the total number of defects depends on module size, so there is need to calculate the optimal size of the module to minimize the defect density. In this paper, an improved model has been formulated that indicates the relationship between defect density and variable size of modules. This relationship could be used for optimization of overall defect density using an effective distribution of modules sizes. Three available data sets related to concern aspect have been examined with the proposed model by taking the distinct values of variables and parameter by putting some constraint on parameters. Curve fitting method has been used to obtain the size of module with minimum defect density. Goodness of fit measures has been performed to validate the proposed model for data sets. The defect density can be optimized by effective distribution of size of modules. The larger modules can be broken into smaller modules and smaller modules can be merged to minimize the overall defect density.

scholarly journals Extended Generalized Sinh-Normal Distribution

Mathematics ◽  
2021 ◽  
Vol 9 (21) ◽  
pp. 2793
Author(s):  
Guillermo Martínez-Flórez ◽  
David Elal-Olivero ◽  
Carlos Barrera-Causil
Keyword(s):  
Reaction Time ◽  
Normal Distribution ◽  
Spatial Data ◽  
Goodness Of Fit ◽  
Natural Extension ◽  
Asymmetric Distribution ◽  
Data Sets ◽  
Agricultural Engineering ◽  
Proposed Model ◽  
Distribution Family

Positively skewed data sets are common in different areas, and data sets such as material fatigue, reaction time, neuronal reaction time, agricultural engineering, and spatial data, among others, need to be fitted according to their features and maintain a good quality of fit. Skewness and bimodality are two of the features that data sets like this could present simultaneously. So, flexible statistical models should be proposed in this sense. In this paper, a general extended class of the sinh-normal distribution is presented. Additionally, the asymmetric distribution family is extended, and as a natural extension of this model, the extended Birnbaum–Saunders distribution is studied as well. The proposed model presents a better goodness of fit compared to the other studied models.

scholarly journals A Novel Support Vector Machine with Globality-Locality Preserving

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Cheng-Long Ma ◽  
Yu-Bo Yuan
Keyword(s):  
Support Vector Machine ◽  
Recognition Rate ◽  
Support Vector ◽  
Data Sets ◽  
Data Space ◽  
Locality Preserving ◽  
Proposed Model ◽  
Improved Model ◽  
Model Support ◽  
Learning Data

Support vector machine (SVM) is regarded as a powerful method for pattern classification. However, the solution of the primal optimal model of SVM is susceptible for class distribution and may result in a nonrobust solution. In order to overcome this shortcoming, an improved model, support vector machine with globality-locality preserving (GLPSVM), is proposed. It introduces globality-locality preserving into the standard SVM, which can preserve the manifold structure of the data space. We complete rich experiments on the UCI machine learning data sets. The results validate the effectiveness of the proposed model, especially on the Wine and Iris databases; the recognition rate is above 97% and outperforms all the algorithms that were developed from SVM.

Human Activity Recognition using Fourier Transform Inspired Deep Learning Combination Model

2019 ◽  
Vol 9 (1) ◽  
pp. 16-31
Author(s):  
Kyungkoo Jun
Keyword(s):  
Fourier Transform ◽  
Deep Learning ◽  
Short Term Memory ◽  
Window Size ◽  
Sensor Data ◽  
Data Sets ◽  
Data Set ◽  
Proposed Model ◽  
Testing Data ◽  
Labeling Scheme

Background & Objective: This paper proposes a Fourier transform inspired method to classify human activities from time series sensor data. Methods: Our method begins by decomposing 1D input signal into 2D patterns, which is motivated by the Fourier conversion. The decomposition is helped by Long Short-Term Memory (LSTM) which captures the temporal dependency from the signal and then produces encoded sequences. The sequences, once arranged into the 2D array, can represent the fingerprints of the signals. The benefit of such transformation is that we can exploit the recent advances of the deep learning models for the image classification such as Convolutional Neural Network (CNN). Results: The proposed model, as a result, is the combination of LSTM and CNN. We evaluate the model over two data sets. For the first data set, which is more standardized than the other, our model outperforms previous works or at least equal. In the case of the second data set, we devise the schemes to generate training and testing data by changing the parameters of the window size, the sliding size, and the labeling scheme. Conclusion: The evaluation results show that the accuracy is over 95% for some cases. We also analyze the effect of the parameters on the performance.

scholarly journals Goodness-of-Fit Tests for Bivariate Time Series of Counts

Econometrics ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 10
Author(s):  
Šárka Hudecová ◽  
Marie Hušková ◽  
Simos G. Meintanis
Keyword(s):  
Goodness Of Fit ◽  
Probability Generating Function ◽  
Parametric Bootstrap ◽  
Real Data ◽  
Data Sets ◽  
Test Statistics ◽  
Finite Sample ◽  
Generalized Poisson ◽  
Goodness Of Fit Tests ◽  
Monte Carlo Experiments

This article considers goodness-of-fit tests for bivariate INAR and bivariate Poisson autoregression models. The test statistics are based on an L2-type distance between two estimators of the probability generating function of the observations: one being entirely nonparametric and the second one being semiparametric computed under the corresponding null hypothesis. The asymptotic distribution of the proposed tests statistics both under the null hypotheses as well as under alternatives is derived and consistency is proved. The case of testing bivariate generalized Poisson autoregression and extension of the methods to dimension higher than two are also discussed. The finite-sample performance of a parametric bootstrap version of the tests is illustrated via a series of Monte Carlo experiments. The article concludes with applications on real data sets and discussion.

An alternative distribution to Lindley and Power Lindley distributions with characterizations, different estimation methods and data applications

2020 ◽  
Vol 70 (4) ◽  
pp. 953-978
Author(s):  
Mustafa Ç. Korkmaz ◽  
G. G. Hamedani
Keyword(s):  
Hazard Function ◽  
Mixture Distribution ◽  
Real Data ◽  
Quantile Function ◽  
Estimation Methods ◽  
Data Sets ◽  
Unknown Parameters ◽  
Lorenz Curves ◽  
Proposed Model ◽  
New Distribution

AbstractThis paper proposes a new extended Lindley distribution, which has a more flexible density and hazard rate shapes than the Lindley and Power Lindley distributions, based on the mixture distribution structure in order to model with new distribution characteristics real data phenomena. Its some distributional properties such as the shapes, moments, quantile function, Bonferonni and Lorenz curves, mean deviations and order statistics have been obtained. Characterizations based on two truncated moments, conditional expectation as well as in terms of the hazard function are presented. Different estimation procedures have been employed to estimate the unknown parameters and their performances are compared via Monte Carlo simulations. The flexibility and importance of the proposed model are illustrated by two real data sets.

scholarly journals A Hypothesis Test for the Goodness-of-Fit of the Marginal Distribution of a Time Series with Application to Stablecoin Data

2021 ◽  
Vol 5 (1) ◽  
pp. 10
Author(s):  
Mark Levene
Keyword(s):  
Time Series ◽  
Goodness Of Fit ◽  
Marginal Distribution ◽  
Hypothesis Test ◽  
Data Sets ◽  
Test Statistic ◽  
Sample Test ◽  
Kolmogorov Smirnov ◽  
Heavy Tailed ◽  
Jensen Shannon Divergence

A bootstrap-based hypothesis test of the goodness-of-fit for the marginal distribution of a time series is presented. Two metrics, the empirical survival Jensen–Shannon divergence (ESJS) and the Kolmogorov–Smirnov two-sample test statistic (KS2), are compared on four data sets—three stablecoin time series and a Bitcoin time series. We demonstrate that, after applying first-order differencing, all the data sets fit heavy-tailed α-stable distributions with 1<α<2 at the 95% confidence level. Moreover, ESJS is more powerful than KS2 on these data sets, since the widths of the derived confidence intervals for KS2 are, proportionately, much larger than those of ESJS.

scholarly journals Neural Decoding Using a Parallel Sequential Monte Carlo Method on Point Processes with Ensemble Effect

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Kai Xu ◽  
Yiwen Wang ◽  
Fang Wang ◽  
Yuxi Liao ◽  
Qiaosheng Zhang ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Point Process ◽  
Goodness Of Fit ◽  
Point Processes ◽  
Sequential Monte Carlo ◽  
Neuronal Response ◽  
Position Estimation ◽  
Monte Carlo Algorithm ◽  
Sequential Monte Carlo Method ◽  
Proposed Model

Sequential Monte Carlo estimation on point processes has been successfully applied to predict the movement from neural activity. However, there exist some issues along with this method such as the simplified tuning model and the high computational complexity, which may degenerate the decoding performance of motor brain machine interfaces. In this paper, we adopt a general tuning model which takes recent ensemble activity into account. The goodness-of-fit analysis demonstrates that the proposed model can predict the neuronal response more accurately than the one only depending on kinematics. A new sequential Monte Carlo algorithm based on the proposed model is constructed. The algorithm can significantly reduce the root mean square error of decoding results, which decreases 23.6% in position estimation. In addition, we accelerate the decoding speed by implementing the proposed algorithm in a massive parallel manner on GPU. The results demonstrate that the spike trains can be decoded as point process in real time even with 8000 particles or 300 neurons, which is over 10 times faster than the serial implementation. The main contribution of our work is to enable the sequential Monte Carlo algorithm with point process observation to output the movement estimation much faster and more accurately.

scholarly journals Investigating the Temporal Effect of User Preferences with Application in Movie Recommendation

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Wen-Jun Li ◽  
Qiang Dong ◽  
Yan Fu
Keyword(s):  
Rapid Development ◽  
User Preferences ◽  
Mobile Internet ◽  
Smart Devices ◽  
Data Sets ◽  
Rating Data ◽  
Temporal Effect ◽  
Proposed Model ◽  
Target User ◽  
The Difference

As the rapid development of mobile Internet and smart devices, more and more online content providers begin to collect the preferences of their customers through various apps on mobile devices. These preferences could be largely reflected by the ratings on the online items with explicit scores. Both of positive and negative ratings are helpful for recommender systems to provide relevant items to a target user. Based on the empirical analysis of three real-world movie-rating data sets, we observe that users’ rating criterions change over time, and past positive and negative ratings have different influences on users’ future preferences. Given this, we propose a recommendation model on a session-based temporal graph, considering the difference of long- and short-term preferences, and the different temporal effect of positive and negative ratings. The extensive experiment results validate the significant accuracy improvement of our proposed model compared with the state-of-the-art methods.

scholarly journals Bivariate Nonlinear Diffusion Degradation Process Modeling via Copula and MCMC

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Huibing Hao ◽  
Chun Su
Keyword(s):  
Nonlinear Diffusion ◽  
Goodness Of Fit ◽  
Real Data ◽  
Degradation Process ◽  
Copula Function ◽  
Assessment Method ◽  
Unknown Parameters ◽  
Degradation Data ◽  
Proposed Model ◽  
Frank Copula

A novel reliability assessment method for degradation product with two dependent performance characteristics (PCs) is proposed, which is different from existing work that only utilized one dimensional degradation data. In this model, the dependence of two PCs is described by the Frank copula function, and each PC is governed by a random effected nonlinear diffusion process where random effects capture the unit to unit differences. Considering that the model is so complicated and analytically intractable, Markov Chain Monte Carlo (MCMC) method is used to estimate the unknown parameters. A numerical example about LED lamp is given to demonstrate the usefulness and validity of the proposed model and method. Numerical results show that the random effected nonlinear diffusion model is very useful by checking the goodness of fit of the real data, and ignoring the dependence between PCs may result in different reliability conclusion.

Sign in / Sign up

Export Citation Format

Share Document