scholarly journals A Facile Synthesis of Graphene-WO3Nanowire Clusters with High Photocatalytic Activity for O2Evolution

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
M.-J. Zhou ◽  
N. Zhang ◽  
Z. H. Hou
Keyword(s):  
Photocatalytic Activity ◽  
Water Splitting ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Charge Transfer Rate ◽  
Ft Ir

In the present work, graphene-WO3nanowire clusters were synthesizedviaa facile hydrothermal method. The obtained graphene-WO3nanowire clusters were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic oxygen (O2) evolution properties of the as-synthesized samples were investigated by measuring the amount of evolved O2from water splitting. The graphene-WO3nanowire clusters exhibited enhanced performance compared to pure WO3nanowire clusters for O2evolution. The amount of evolved O2from water splitting after 8 h for the graphene-WO3nanowire clusters isca.0.345 mmol/L, which is more than 1.9 times as much as that of the pure WO3nanowire clusters (ca.0.175 mmol/L). The high photocatalytic activity of the graphene-WO3nanowire clusters was attributed to a high charge transfer rate in the presence of graphene.

scholarly journals Hydrothermal Synthesis of Iodine-Doped Nanoplates with Enhanced Visible and Ultraviolet-Induced Photocatalytic Activities

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Jiang Zhang ◽  
Zheng-Hong Huang ◽  
Yong Xu ◽  
Feiyu Kang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Oxygen Vacancies ◽  
Diffuse Reflectance Spectroscopy ◽  
Synergetic Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities

The iodine-doped Bi2WO6(I-BWO) photocatalyst was prepared via a hydrothermal method using potassium iodide as the source of iodine. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The photocatalytic activity of I-BWO for the degradation of rhodamine B (RhB) was higher than that of pure BWO and I2-BWO regardless of visible light (>420 nm) or ultraviolet light (<400 nm) irradiation. The results of DRS analysis showed that the I-BWO and I2-BWO catalysts had narrower band gaps. XPS analysis proved that the multivalent iodine species including I0and were coadsorbed on the defect surface of Bi2WO6in I-BWO. The enhanced PL intensity revealed that a large number of defects of oxygen vacancies were formed by the doping of iodine. The enhanced photocatalytic activity of I-BWO for degradation of RhB was caused by the synergetic effect of a small crystalline size, a narrow band gap, and plenty of oxygen vacancies.

scholarly journals Preparation and photocatalytic activity of the layered titanates

2010 ◽  
Vol 4 (2) ◽  
pp. 69-73 ◽  
Author(s):  
Marija Milanovic ◽  
Ivan Stijepovic ◽  
Ljubica Nikolic
Keyword(s):  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Bet Method ◽  
Ft Ir

Titanate structures were synthesized in highly alkaline solution using hydrothermal procedure. As-prepared powders were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). A specific surface area of the powders was measured by BET method. Results confirmed formation of layered trititanates, already after one hour of hydrothermal synthesis. To examine the photocatalytic activity of the as-prepared layered titanates, methylene blue (MB) was employed as a target compound in response to visible light at ambient temperature. It was observed that the specific surface area, size distribution and crystallinity are important factors to get high photocatalytic activity for the decomposition of MB. .

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

The Construction of the Heterostructural Bi2O3/g-C3N4 Composites with an Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (06) ◽  
pp. 1850063 ◽  
Author(s):  
Jinhua Zhang ◽  
Huiyue Qian ◽  
Wencheng Liu ◽  
Hao Chen ◽  
Yang Qu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Photogenerated Electron ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Air Atmosphere ◽  
Transmission Electron ◽  
Ft Ir ◽  
The One

A heterostructural composite composed of g-C3N4 and Bi2O3 was achieved by the one-pot and thermal-induced polycondensation method using melamine and Bi(NO[Formula: see text] as precursor at 550[Formula: see text]C under air atmosphere. The crystalline phase, components and morphologies of the as-prepared composites were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Besides, the photocatalytic activity of composites was evaluated by degrading RhB aqueous solution at room temperature under visible light irradiation. Compared with bulk g-C3N4, the photocatalytic efficiency of the 0.5% Bi2O3/g-C3N4 (Bi–CN) was increased by up to four times. The introduction of Bi2O3 enhances not only the light absorption ability, but also the separation of photogenerated electron–hole pairs.

Dye-Sensitized-Assisted, Enhanced Photocatalytic Activity of TiO2/Bi4V2O11

NANO ◽  
2018 ◽  
Vol 13 (03) ◽  
pp. 1850028 ◽  
Author(s):  
Mengjun Liang ◽  
Zhiyuan Yang ◽  
Ying Mei ◽  
Haoran Zhou ◽  
Shuijin Yang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Sensitized ◽  
Transmission Electron ◽  
Efficient Charge ◽  
Degradation Activity ◽  
Adsorption Desorption

In this study, the TiO2/Bi4V2O[Formula: see text] nanocomposite photocatalysts were prepared by loading different amount of TiO2 nanoparticles onto the surface of Bi4V2O[Formula: see text] nanospheres via a facile hydrothermal method. Afterwards, the as-synthesized samples were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), N2 adsorption–desorption isotherms, X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS) and photocurrent techniques. The optimal TiO2/Bi4V2O[Formula: see text] composite with 20[Formula: see text]wt.% TiO2 loading (TB2) exhibited the best photocatalytic activity, which could degrade almost RhB completely within 30[Formula: see text]min under visible light irradiation. The enhanced photocatalytic activity of TiO2/Bi4V2O[Formula: see text] composites for RhB degradation could be mainly ascribed to the efficient charge separation over dye-induced sensitized and the increased specific surface area. Also, the photocatalytic activities of TiO2/Bi4V2O[Formula: see text] for CIP degradation were tested. After five consecutive recycling experiments, the photocatalytic degradation activity of TB2 could still reach 99% which indicated that the catalysts had superior stability. Based on the experimental and bandgap calculations, a possible photocatalytic mechanism of TiO2/Bi4V2O[Formula: see text] for RhB degradation was proposed.

scholarly journals Synthesis, Characterization, and Photocatalytic Activity of Microspheres Functionalized with Porphyrin

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Jin-Hua Cai ◽  
Jin-Wang Huang ◽  
Han-Cheng Yu ◽  
Liang-Nian Ji
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
Model Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

In order to utilize visible light more efficiently in the photocatalytic reaction, microspheres sensitized by 5-(4-allyloxy)phenyl-10,15,20-tri(4-methylphenyl)porphyrin (APTMPP) were prepared and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and UV-vis diffuse reflectance spectroscopy, and so forth, The characterization results indicated that APTMPP-MPS- was composed of the anatase crystal phase. The morphology of the composite materials was spheriform with size of 0.3–0.7 μm and the porphyrin was chemisorbed on the surface of through a Si–O–Ti bond. The photooxidation ofα-terpinene was employed as the model reaction to evaluate the photocatalytic activity of APTMPP-MPS- microspheres under visible light. The results indicated that the photodegradation ofα-terpinene was significantly enhanced in the presence of the APTMPP-MPS- compared with the nonmodified under visible light.

scholarly journals Enhanced Photocatalytic Activity of W-Doped and W-La-Codoped TiO2Nanomaterials under Simulated Sunlight

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Chenghe Hua ◽  
Xiaoli Dong ◽  
Xiuying Wang ◽  
Mang Xue ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Absorption Edge ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Methyl Orange Solution ◽  
High Photocatalytic Activity ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

W-doped TiO2and W-La-codoped TiO2nanomaterials were successfully synthesized via the sol-gel method. The products were characterized by X-ray diffraction, UV-vis diffuse reflectance spectrophotometer, transmission electron microscopy, and X-ray photoelectron spectroscopy. The presence of W and La results in significant red shift of absorption edge for TiO2-based nanomaterials. The weight ratios of La and W in the composites play important roles in the absorption edge for TiO2-based nanomaterials. The photocatalytic activities of both W-doped TiO2and W-La-codoped TiO2photocatalysts for decolorization of methyl orange solution were evaluated under simulated sunlight irradiation. The results showed that both W-doped and W-La-codoped can effectively improve the photocatalytic behaviors of TiO2nanomaterials ascribed to the improved photoinduced charge carriers separation, enhanced light absorption, and large surface area. Furthermore, W-La-codoped TiO2exhibited higher photocatalytic activity than W-doped TiO2. Considering their high photocatalytic activity, the doped TiO2nanomaterials could be applied in wastewater treatment and environmental purification.

scholarly journals Study of the Effect of TiO2 Layer on the Adsorption and Photocatalytic Activity of TiO2-MoS2 Heterostructures under Visible-Infrared Light

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
N. Cruz-González ◽  
O. Calzadilla ◽  
J. Roque ◽  
F. Chalé-Lara ◽  
J. K. Olarte ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Nitrogen Adsorption ◽  
High Photocatalytic Activity ◽  
Infrared Light ◽  
Polluted Water ◽  
Light Spectrum ◽  
X Ray

In the last decade, the urgent need to environmental protection has promoted the development of new materials with potential applications to remediate air and polluted water. In this work, the effect of the TiO2 thin layer over MoS2 material in photocatalytic activity is reported. We prepared different heterostructures, using a combination of electrospinning, solvothermal, and spin-coating techniques. The properties of the samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), and X-ray photoelectron spectroscopy (XPS). The adsorption and photocatalytic activity were evaluated by discoloration of rhodamine B solution. The TiO2-MoS2/TiO2 heterostructure presented three optical absorption edges at 1.3 eV, 2.28 eV, and 3.23 eV. The high adsorption capacity of MoS2 was eliminated with the addition of TiO2 thin film. The samples show high photocatalytic activity in the visible-IR light spectrum.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

scholarly journals Photocatalytic Degradation of Estriol Using Iron-Doped TiO2 under High and Low UV-Irradiation

2018 ◽  
Author(s):  
Irwing M. Ramírez-Sánchez ◽  
Erick R. Bandala
Keyword(s):  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Uv Irradiation ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Bet Surface Area ◽  
Doped Tio2 ◽  
X Ray ◽  
Transmission Electron ◽  
Iron Doped

Iron Doped TiO2 nanoparticles (Fe-TiO2) were synthesized and photocatalitically investigated under high and low fluence values of UV-radiation. The Fe-TiO2 physical characterization was performed using X-ray Powder Diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Diffuse Reflectance Spectroscopy (DRS), and X-Ray Photoelectron Spectroscopy (XPS) technique. The XPS evidenced that ferric ion (Fe3+) was in the lattice of TiO2 and co-dopants no intentionally added were also present due to the precursors of the synthetic method. The Fe3+ concentration played a key role in the photocatalytic generation of hydroxyl radical (&bull;OH) and estriol (E3) degradation. Fe-TiO2 materials accomplished E3 degradation, and it was found that the catalyst with 0.3 at. % content of Fe (0.3 Fe-TiO2) enhanced the photocatalytic activity under low UV-irradiation compared with no intentionally Fe-added TiO2 (zero-iron TiO2) and Aeroxide&reg; TiO2 P25. Furthermore, the enhanced photocatalytic activity of 0.3 Fe-TiO2 under low UV-irradiation may have applications when radiation intensity must be controlled, as in medical applications, or when strong UV absorbing species are present in water.

Sign in / Sign up

Export Citation Format

Share Document