scholarly journals Water Absorption and Thermomechanical Characterization of Extruded Starch/Poly(lactic acid)/Agave Bagasse Fiber Bioplastic Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
F. J. Aranda-García ◽  
R. González-Núñez ◽  
C. F. Jasso-Gastinel ◽  
E. Mendizábal
Keyword(s):  
Lactic Acid ◽  
Water Absorption ◽  
Impact Resistance ◽  
Thermoplastic Starch ◽  
Thermomechanical Behavior ◽  
Poly Lactic Acid ◽  
Content Increase ◽  
Fiber Fracture ◽  
Bagasse Fiber

Water absorption and thermomechanical behavior of composites based on thermoplastic starch (TPS) are presented in this work, wherein the concentration of agave bagasse fibers (ABF, 0–15 wt%) and poly(lactic acid) (PLA, 0–30 wt%) is varied. Glycerol (G) is used as starch (S) plasticizer to form TPS. Starch stands as the polymer matrix (70/30 wt/wt, S/G). The results show that TPS hygroscopicity decreases as PLA and fiber content increase. Storage, stress-strain, and flexural moduli increase with PLA and/or agave bagasse fibers (ABF) content while impact resistance decreases. The TPS glass transition temperature increases with ABF content and decreases with PLA content. Micrographs of the studied biocomposites show a stratified brittle surface with a rigid fiber fracture.

scholarly journals In Vitro Characterization of Poly(Lactic Acid)/ Poly(Hydroxybutyrate)/ Thermoplastic Starch Blends for Tissue Engineering Application

2021 ◽  
Vol 30 ◽  
pp. 096368972110210
Author(s):  
Martina Culenova ◽  
Ivana Birova ◽  
Pavol Alexy ◽  
Paulina Galfyova ◽  
Andreas Nicodemou ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Thermoplastic Starch ◽  
Biological Behavior ◽  
Poly Lactic Acid ◽  
Cytotoxicity Test ◽  
In Vitro Characterization ◽  
Custom Made

Complex in vitro characterization of a blended material based on Poly(Lactic Acid), Poly(Hydroxybutyrate), and Thermoplastic Starch (PLA/PHB/TPS) was performed in order to evaluate its potential for application in the field of tissue engineering. We focused on the biological behavior of the material as well as its mechanical and morphological properties. We also focused on the potential of the blend to be processed by the 3D printer which would allow the fabrication of the custom-made scaffold. Several blends recipes were prepared and characterized. This material was then studied in the context of scaffold fabrication. Scaffold porosity, wettability, and cell-scaffold interaction were evaluated as well. MTT test and the direct contact cytotoxicity test were applied in order to evaluate the toxic potential of the blended material. Biocompatibility studies were performed on the human chondrocytes. According to our results, we assume that material had no toxic effect on the cell culture and therefore could be considered as biocompatible. Moreover, PLA/PHB/TPS blend is applicable for 3D printing. Printed scaffolds had highly porous morphology and were able to absorb water as well. In addition, cells could adhere and proliferate on the scaffold surface. We conclude that this blend has potential for scaffold engineering.

scholarly journals Mechanical, Morphological and Thermal Characterization of Compatibilized Poly(lactic acid)/Thermoplastic Starch Blends

2020 ◽  
Vol 13 (1) ◽  
pp. 1-13
Author(s):  
László Lendvai ◽  
Dávid Brenn
Keyword(s):  
Lactic Acid ◽  
Interfacial Adhesion ◽  
Thermal Characterization ◽  
Thermoplastic Starch ◽  
Chain Extender ◽  
Coupling Agents ◽  
Poly Lactic Acid ◽  
Binary Blends ◽  
Starch Blends

A two-step compounding procedure was used to produce binary blends composed of poly(lactic acid) (PLA)  and thermoplastic starch (TPS) with varying component ratios. Subsequently, three different chemical connectors were introduced in order to enhance the interfacial adhesion between the PLA and the TPS. Maleic anhydride, blocked isocyanate, and chain extender were used as coupling agents. Mechanical, morphological and thermal properties of PLA/TPS blends were determined. It was revealed that the initial interfacial adhesion between the components is weak. Out of the three coupling agents introduced, the chain extender proved to be the most effective, however, the improvement achieved in the mechanical properties was still marginal. According to the thermogravimetric analysis thermal stability was not significantly affected by any of the coupling agents.

scholarly journals Synthesis and Characterization of Polyphosphazenes Modified with Hydroxyethyl Methacrylate and Lactic Acid

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Evelyn Carolina Martínez Ceballos ◽  
Ricardo Vera Graziano ◽  
Gonzalo Martínez Barrera ◽  
Oscar Olea Mejía
Keyword(s):  
Lactic Acid ◽  
Ring Opening ◽  
Room Temperature ◽  
Block Structure ◽  
Ring Opening Polymerization ◽  
Synthesis And Characterization ◽  
Poly Lactic Acid ◽  
Hydroxyethyl Methacrylate ◽  
H Nmr

Poly(dichlorophosphazene) was prepared by melt ring-opening polymerization of the hexachlorocyclotriphosphazene. Poly[bis(2-hydroxyethyl-methacrylate)-phosphazene] and poly[(2-hydroxyethyl-methacrylate)-graft-poly(lactic-acid)-phosphazene] were obtained by nucleophilic condensation reactions at different concentrations of the substituents. The properties of the synthesized copolymers were assessed by FTIR,1H-NMR and31P-NMR, thermal analysis (DSC-TGA), and electron microscopy (SEM). The copolymers have a block structure and show twoTg's below room temperature. They are stable up to a temperature of 100°C. The type of the substituents attached to the PZ backbone determines the morphology of the polymers.

Mechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) Blends

2014 ◽  
Vol 970 ◽  
pp. 312-316
Author(s):  
Sujaree Tachaphiboonsap ◽  
Kasama Jarukumjorn
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Interfacial Adhesion ◽  
Tensile Modulus ◽  
Thermoplastic Starch ◽  
Morphological Properties ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Elongation At Break ◽  
Blending Method

Thermoplastic starch (TPS)/poly (lactic acid) (PLA) blend and thermoplastic starch (TPS)/poly (lactic acid) (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blend were prepared by melt blending method. PLA grafted with maleic anhydride (PLA-g-MA) was used as a compatibilizer to improve the compatibility of the blends. As TPS was incorporated into PLA, elongation at break was increased while tensile strength, tensile modulus, and impact strength were decreased. Tensile properties and impact properties of TPS/PLA blend were improved with adding PLA-g-MA indicating the enhancement of interfacial adhesion between PLA and TPS. With increasing PBAT content, elongation at break and impact strength of TPS/PLA blends were improved. The addition of TPS decreased glass transition temperature (Tg), crystallization temperature (Tc), and melting temperature (Tm) of PLA. Tgand Tcof TPS/PLA blend were decreased by incorporating PLA-g-MA. However, the presence of PBAT reduced Tcof TPS/PLA blend. Thermal properties of TPS/PLA/PBAT blends did not change with increasing PBAT content. SEM micrographs revealed that the compatibilized TPS/PLA blends exhibited finer morphology when compared to the uncompatibilized TPS/PLA blend.

Biological Oxidative Mechanisms for Degradation of Poly(lactic acid) Blended with Thermoplastic Starch

2015 ◽  
Vol 3 (11) ◽  
pp. 2756-2766 ◽  
Author(s):  
Carlos A. Rodrigues ◽  
Aryane Tofanello ◽  
Iseli L. Nantes ◽  
Derval S. Rosa
Keyword(s):  
Lactic Acid ◽  
Thermoplastic Starch ◽  
Poly Lactic Acid

Tensile and water absorption properties of solvent cast biofilms of sugarcane leaves fibre-filled poly(lactic) acid

2018 ◽  
Vol 33 (3) ◽  
pp. 289-304 ◽  
Author(s):  
Kuhananthan Nanthakumar ◽  
Chan Ming Yeng ◽  
Koay Seong Chun
Keyword(s):  
Tensile Strength ◽  
Lactic Acid ◽  
Water Absorption ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Poly Lactic Acid ◽  
Infrared Analysis ◽  
Absorption Properties ◽  
Elongation At Break ◽  
Bleaching Treatment

This research covers the preparation of poly(lactic acid) (PLA)/sugarcane leaves fibre (SLF) biofilms via a solvent-casting method. The results showed that the tensile strength and Young’s modulus of PLA/SLF biofilms increased with the increasing of SLF content. Nevertheless, the elongation at break showed an opposite trend as compared to tensile strength and Young’s modulus of biofilms. Moreover, water absorption properties of PLA/SLF biofilms increased with the increasing of SLF content. In contrast, the tensile strength and Young’s modulus of biofilms were enhanced after bleaching treatment with hydrogen peroxide on SLF, but the elongation at break and water absorption properties of bleached biofilms were reduced due to the improvement of filler–matrix adhesion in biofilms. The tensile and water properties were further discussed using B-factor and Fick’s law, respectively. Furthermore, the functional groups of unbleached and bleached SLF were characterized by Fourier transform infrared analysis.

Sign in / Sign up

Export Citation Format

Share Document