scholarly journals Influence of Trabecular Bone on Peri-Implant Stress and Strain Based on Micro-CT Finite Element Modeling of Beagle Dog

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Sheng-hui Liao ◽  
Xing-hao Zhu ◽  
Jing Xie ◽  
Vikesh Kumar Sohodeb ◽  
Xi Ding
Keyword(s):  
Finite Element ◽  
Trabecular Bone ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
Simplified Model ◽  
Stress And Strain ◽  
Refined Model ◽  
Bone Interface ◽  
Trabecular Microstructure ◽  
Trabecular Bone Microstructure

The objective of this investigation is to analyze the influence of trabecular microstructure modeling on the biomechanical distribution of the implant-bone interface. Two three-dimensional finite element mandible models, one with trabecular microstructure (a refined model) and one with macrostructure (a simplified model), were built. The values of equivalent stress at the implant-bone interface in the refined model increased compared with those of the simplified model and strain on the contrary. The distributions of stress and strain were more uniform in the refined model of trabecular microstructure, in which stress and strain were mainly concentrated in trabecular bone. It was concluded that simulation of trabecular bone microstructure had a significant effect on the distribution of stress and strain at the implant-bone interface. These results suggest that trabecular structures could disperse stress and strain and serve as load buffers.

scholarly journals Accuracy of Individual Trabecula Segmentation Based Plate and Rod Finite Element Models in Idealized Trabecular Bone Microstructure

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Hong Wang ◽  
X. Sherry Liu ◽  
Bin Zhou ◽  
Ji Wang ◽  
Baohua Ji ◽  
...  
Keyword(s):  
Finite Element ◽  
Trabecular Bone ◽  
Computational Cost ◽  
Three Dimensional ◽  
Failure Behavior ◽  
Micro Computed Tomography ◽  
Promising Tool ◽  
Fold Reduction ◽  
Trabecular Microstructure ◽  
Trabecular Bone Microstructure

Currently, specimen-specific micro finite element (μFE) analysis based micro computed tomography (μCT) images have become a major computational tool for the assessment of the mechanical properties of human trabecular bone. Despite the fine characterization of the three-dimensional (3D) trabecular microstructure based on high-resolution μCT images, conventional μFE models with each voxel converted to an element are not efficient in predicting the nonlinear failure behavior of bone due to a prohibitive computational cost. Recently, a highly efficient individual trabecula segmentation (ITS)-based plate and rod (PR) modeling technique has been developed by substituting individual plates and rods with shell and beam elements, respectively. In this technical brief, the accuracy of novel PR μFE models was examined in idealized microstructure models over a broad range of trabecular thicknesses. The Young's modulus and yield strength predicted by simplified PR models strongly correlated with those of voxel models at various voxel sizes. The conversion from voxel models to PR models resulted in an ∼762-fold reduction in the largest model size and significantly accelerated the nonlinear FE analysis. The excellent predictive power of the PR μFE models, demonstrated in an idealized trabecular microstructure, provided a quantitative mechanical basis for this promising tool for an accurate and efficient assessment of trabecular bone mechanics and fracture risk.

Study on Stress and Strain of Anchorage Using Finite Element Method

2013 ◽  
Vol 325-326 ◽  
pp. 1314-1317
Author(s):  
Cong Sheng Chen ◽  
Ping He ◽  
Cheng Yong Wang ◽  
Xue Hui Chen ◽  
Lei Huang ◽  
...  
Keyword(s):  
Finite Element ◽  
Strain Distribution ◽  
Maximum Stress ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Integrated Modeling ◽  
Stress And Strain ◽  
Steel Strand ◽  
Prestressed State ◽  
Stress And Strain Distribution

Three-dimensional integrated modeling method and the numerical simulation of elastoplastic finite element are adopted in the paper. The mechanical response of the five holes anchorage is analyzed in certain prestressed state. The stress and strain distribution information of the anchor ring, clip and steel strand is obtained respectively, and the structure safety is discussed by investigating on the maximum stress and strain.

The Effect of Trabecular Bone on the Mechanical Response of Human Mandible with Implant

2014 ◽  
Vol 695 ◽  
pp. 588-591
Author(s):  
Khairul Salleh Basaruddin ◽  
Ruslizam Daud
Keyword(s):  
Computed Tomography ◽  
Finite Element ◽  
Trabecular Bone ◽  
Static Analysis ◽  
Load Distribution ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Fe Model ◽  
Micro Computed Tomography ◽  
Bone Specimen

This study aims to investigate the influence of trabecular bone in human mandible bone on the mechanical response under implant load. Three dimensional voxel finite element (FE) model of mandible bone was reconstructed from micro-computed tomography (CT) images that were captured from bone specimen. Two FE models were developed where the first consists of cortical bone, trabecular bone and implants, and trabecular bone part was excluded in the second model. A static analysis was conducted on both models using commercial software Voxelcon. The results suggest that trabecular bone contributed to the strength of human mandible bone and to the effectiveness of load distribution under implant load.

scholarly journals Finite Element Analysis of Needle Insertion Angle in Insulin Therapy

2019 ◽  
Vol 16 (4) ◽  
pp. 7512-7523
Author(s):  
Syakirah Mohamed Amin ◽  
Muhammad Hanif Ramlee ◽  
Hadafi Fitri Mohd Latip ◽  
Gan Hong Seng ◽  
Mohammed Rafiq Abdul Kadir
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Insulin Therapy ◽  
Maximum Stress ◽  
Three Dimensional ◽  
Needle Insertion ◽  
Stress And Strain ◽  
Medical Doctors ◽  
Element Analysis ◽  
Biomechanical Evaluation

Millions in the world suffering diabetes mellitus depends on insulin therapy to control their blood glucose level daily. However, the painful daily injections they need to take could lead to other complications if it is not done correctly. To date, it is suggested by many researchers and medical doctors that the needles should be inserted at any angles of 90º or 45º. Nevertheless, this recommendation has not been supported by clinical or biomechanical evaluation. Hence, this study evaluates the needle insertion for insulin therapy to find the favourable angles in order to reduce injury and pain onto the skin. Finite element analysis was done by  simulating the injection of three-dimensional (3D) needle model into a 3D skin model. The insertions were simulated at two different angles, which are 45ºand 90º with two different lengths of needles; 4 mm and 6 mm. This study concluded the favourable angle for 4 mm needle to be 90º while 6 mm needle was best to be inserted at 45º as these angles exerted the least maximum stress and strain onto the skin.

Three-Dimensional Finite Element Analysis of Elastic-Plastic Layered Media Under Thermomechanical Surface Loading

2002 ◽  
Vol 125 (1) ◽  
pp. 52-59 ◽  
Author(s):  
N. Ye ◽  
K. Komvopoulos
Keyword(s):  
Finite Element ◽  
Layered Medium ◽  
Numerical Solutions ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
Layered Media ◽  
Thin Layers ◽  
Surface Loading ◽  
Elastic Plastic ◽  
Thermomechanical Surface

The simultaneous effects of mechanical and thermal surface loadings on the deformation of layered media were analyzed with the finite element method. A three-dimensional model of an elastic sphere sliding over an elastic-plastic layered medium was developed and validated by comparing finite element results with analytical and numerical solutions for the stresses and temperature distribution at the surface of an elastic homogeneous half-space. The evolution of deformation in the layered medium due to thermomechanical surface loading is interpreted in light of the dependence of temperature, von Mises equivalent stress, first principal stress, and equivalent plastic strain on the layer thickness, Peclet number, and sliding distance. The propensity for plastic flow and microcracking in the layered medium is discussed in terms of the thickness and thermal properties of the layer, sliding speed, medium compliance, and normal load. It is shown that frictional shear traction and thermal loading promote stress intensification and plasticity, especially in the case of relatively thin layers exhibiting low thermal conductivity.

BIOMECHANICAL STABILITY OF THE CERVICAL SPINE AFTER UNCINATE PROCESS RESECTION: A FINITE ELEMENT ANALYSIS

2015 ◽  
Vol 15 (06) ◽  
pp. 1540049 ◽  
Author(s):  
XUEFENG BO ◽  
XI MEI ◽  
HUI WANG ◽  
WEIDA WANG ◽  
ZAN CHEN ◽  
...  
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
Element Model ◽  
Uncinate Process ◽  
Total Deformation ◽  
Maximum Equivalent Stress ◽  
Left And Right ◽  
The Stability

When performing anterolateral foraminotomy for the treatment of cervical spondylotic radiculopathy, the extent of uncinate process resection affects the stability of the cervical spine. The aim of this study was to determine the stability of the cervical spine after resection of various amounts of the uncinate process. Based on computed tomography (CT) scans of an adult male volunteer, a three-dimensional geometric model of the cervical spine (C4-C6) was established using Mimics 13.1, SolidWorks 2012, and ANSYS 15.0 software packages. Next, the mechanical parameters of the tissues were assigned according to their different material characteristics. Using the tetrahedral mesh method, a three-dimensional finite element model of the cervical spine was then established. In modeling uncinated process resection, two excision protocols were compared. The first excision protocol, protocol A, mimicked the extent of resection used in current clinical surgical practice. The second excision protocol, protocol B, employed an optimal resection extent as predicted by the finite element model. Protocols A and B were then used to resect the left uncinate process of the C5 vertebra to either 50% or 60% of the total height of the uncinate process. The stability of the cervical spine was assessed by evaluating values of deformation and maximum equivalent stress during extension, flexion, lateral bending, and rotation. After protocol A resection, the total deformation was increased as was the maximum equivalent stress during left and right rotation. After protocol B resection, the total deformation was little changed and the maximum equivalent stress was visibly decreased during left and right rotation. As evidenced by these results, protocol B resection had relatively little effect on the stability of the cervical spine, suggesting that resection utilizing the limits proposed in protocol B appears to better maintain the stability of the cervical spine when compared with current clinical surgical practice as replicated in protocol A.

Sign in / Sign up

Export Citation Format

Share Document