scholarly journals Complex Characteristics of Multichannel Household Appliance Supply Chain with the Price Competition

Complexity ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Junhai Ma ◽  
Wandong Lou

This paper studies the complex characteristics caused by the price competition in multichannel household appliance supply chains. We consider a two-level household appliance supply chain system consisting of a manufacturer with an Internet channel and a retailer with a traditional channel and an Internet channel. Each channel’s price-setting follows the bounded rational decision process in order to obtain the optimal profit or more market share. Considering that the price competition often leads to the demand and order fluctuation, we also investigate the bullwhip effect of the multichannel supply chains on the basis of the order-up-to-inventory policy. From the numerical simulation, we find a system in a chaotic state will suffer larger bullwhip effect than a stable system, and the manufacturer’s Internet channel is helpful to mitigate the bullwhip effect. Our results provide some useful managerial inspirations for the household manufacturer and retailers. Firstly, each channel should make their retail price with a suitable price adjustment speed in the stable region, and each time pricing cannot exceed the domain of attraction. Secondly, the manufacturer can adopt a more radical pricing strategy in their Internet channel to mitigate the bullwhip effect. Thirdly, the price adjustment should be reviewed and be appropriately reduced if the price adjustment is too large.

2020 ◽  
Author(s):  
Zhan Qu ◽  
Horst Raff

This paper shows that decentralized supply chains, in which upstream firms use linear wholesale prices, may experience lower upstream production and downstream sales volatility than vertically integrated supply chains and may be less susceptible to the bullwhip effect by which the variance of upstream production exceeds the variance of downstream sales. The reason is that decentralized supply chains exhibit a price effect, whereby upstream producers raise wholesale prices in the case of positive demand shocks and lower wholesale prices in the case of negative demand shocks. Whereas upstream producers benefit from the price effect and, thus, from a dampening of the bullwhip effect, downstream firms may lose, and overall supply chain profit may decrease. This paper was accepted by Vishal Gaur, operations management.


2021 ◽  
Author(s):  
Mounir Bensalem

The evolution towards Industry 4.0 is driving the need for innovative solutions in the area of network management, considering the complex, dynamic and heterogeneous nature of ICT supply chains. To this end, Intent-Based networking (IBN) which is already proven to evolve how network management is driven today, can be implemented as a solution to facilitate the management of large ICT supply chains. In this paper, we first present a comparison of the main architectural components of typical IBN systems and, then, we study the key engineering requirements when integrating IBN with ICT supply chain network systems while considering AI methods. We also propose a general architecture design that enables intent translation of ICT supply chain specifications into lower level policies, to finally show an example of how the access control is performed in a modeled ICT supply chain system.


2019 ◽  
Vol 14 (2) ◽  
pp. 360-384 ◽  
Author(s):  
Maria Drakaki ◽  
Panagiotis Tzionas

PurposeInformation distortion results in demand variance amplification in upstream supply chain members, known as the bullwhip effect, and inventory inaccuracy in the inventory records. As inventory inaccuracy contributes to the bullwhip effect, the purpose of this paper is to investigate the impact of inventory inaccuracy on the bullwhip effect in radio-frequency identification (RFID)-enabled supply chains and, in this context, to evaluate supply chain performance because of the RFID technology.Design/methodology/approachA simulation modeling method based on hierarchical timed colored petri nets is presented to model inventory management in multi-stage serial supply chains subject to inventory inaccuracy for various traditional and information sharing configurations in the presence and absence of RFID. Validation of the method is done by comparing results obtained for the bullwhip effect with published literature results.FindingsThe bullwhip effect is increased in RFID-enabled multi-stage serial supply chains subject to inventory inaccuracy. The information sharing supply chain is more sensitive to the impact of inventory inaccuracy.Research limitations/implicationsInformation sharing involves collaboration in market demand and inventory inaccuracy, whereas RFID is implemented by all echelons. To obtain the full benefits of RFID adoption and collaboration, different collaboration strategies should be investigated.Originality/valueColored petri nets simulation modeling of the inventory management process is a novel approach to study supply chain dynamics. In the context of inventory errors, information on RFID impact on the dynamic behavior of multi-stage serial supply chains is provided.


2020 ◽  
Vol 40 (10) ◽  
pp. 1649-1660 ◽  
Author(s):  
Robert B. Handfield ◽  
Gary Graham ◽  
Laird Burns

PurposeUsing the constructal law of physics this study aims to provide guidance to future scholarship on global supply chain management. Further, through two case studies the authors are developing, the authors report interview findings with two senior VPs from two multi-national corporations being disrupted by COVID-19. This study suggests how this and recent events will impact on the design of future global supply chains.Design/methodology/approachThe authors apply the constructal law to explain the recent disruptions to the global supply chain orthodoxy. Two interviews are presented from case studies the authors are developing in the USA and UK – one a multi-national automobile parts supplier and the other is a earth-moving equipment manufacture. Specifically, this is an exploratory pathway work trying to make sense of the COVID-19 pandemic and its impact on supply chain scholarship.FindingsAdopting the approach of Bejan, the authors believe that what is happening today with COVID-19 and other trade disruptions such as Brexit and the USA imposing tariffs is creating new obstacles that will redirect the future flow of supply chains.Research limitations/implicationsIt is clear that the COVID-19 response introduced a bullwhip effect in the manufacturing sector on a scale never-before seen. For scholars, the authors would suggest there are four pathway topics going forward. These topics include: the future state of global sourcing, the unique nature of a combined “demand” and “supply shortage” bullwhip effect, the resurrection of lean and local production systems and the development of risk-recovery contingency strategies to deal with pandemics.Practical implicationsSupply chain managers tend to be iterative and focused on making small and subtle changes to their current system and way of thinking, very often seeking to optimize cost or negotiate better contracts with suppliers. In the current environment, however, such activities have proved to be of little consequence compared to the massive forces of economic disruption of the past three years. Organizations that have more tightly compressed supply chains are enjoying a significant benefit during the COVID-19 crisis and are no longer being held hostage to governments of another country.Social implicationsAn implicit assumption in the press is that COVID-19 caught everyone by surprise, and that executives foolishly ignored the risks of outsourcing to China and are now paying the price. However, noted scholars and epidemiologists have been warning of the threats of pandemics since the severe acute respiratory syndrome (SARS) virus. The pundits would further posit that in their pursuit of low-cost production, global corporations made naive assumptions that nothing could disrupt them. Both the firms the authors have interviewed had to close plants to protect their workforce. It was indicated in the cases the authors are developing that it is going to take manufacturers on average one month to recover from 4–6 days of disruption. These companies employ many thousands of people, and direct and ancillary workers are now temporarily laid off and face an uncertain future as/when they will recover back to normal production.Originality/valueUsing the constructal law of physics, the authors seek to provide guidance to future scholarship on global supply chain management. Further, through two case studies, the authors provide the first insight from two senior VPs from two leading multi-national corporations in their respective sectors being disrupted by COVID-19. This study is the first indication to how this and recent disruptive events will impact on the design of future global supply chains. Unlike the generic work, which has recently appeared in HBR and Forbes, it is grounded in real operational insight.


2019 ◽  
Vol 11 (15) ◽  
pp. 4237 ◽  
Author(s):  
Xiaodong Zhu ◽  
Lingfei Yu ◽  
Wei Li

The closed-loop supply chain management model is an effective way to promote sustainable economic development and environmental protection. Increasing the sales volume of remanufactured products to stimulate green growth is a key issue in the development of closed-loop supply chains. By designing an effective warranty strategy, customer’s perceived value can be enhanced and market demand can be stimulated. This study cuts through the warranty period of closed-loop supply chain products. Based on the perspective of consumer behavior, game theory is used to construct the optimal decision-making model for closed-loop supply chains. The optimal warranty decision making for new products and remanufactured products under centralized and decentralized decision-making models is discussed. Further, the impact of the closed-loop supply chain system with warranty services and the design of contract coordination is also shown. We show that consumer preference has a positive impact on the sales of remanufactured products and the profits of enterprises; with the extension of the new product and remanufacturing warranty period, the profit of the supply chain system first increases and then decreases, and the value is maximized at the extreme point in the manufacturer-led decision-making model. Furthermore, the leader gains higher profits with bargaining power, but the profit of the supply chain system under decentralized decision model is less than that of the centralized decision model, reflecting the double marginalization effect. The revenue sharing contract and the two-charge contract designed in this study coordinate the closed-loop supply chain system with warranty services, so that the member companies in the supply chain can achieve Pareto improvement.


2019 ◽  
Vol 6 (1) ◽  
pp. 19-26 ◽  
Author(s):  
Prabhat Mittal

The present study is an attempt to quantify the Bullwhip Effect (BWE) -the phenomenon in which information on demand is distorted in moving up a supply chain. Assuming that the retailer employs an order-up-to level policy with auto-regressive process (AR), the paper investigates the influence of forecasting methods on bullwhip effect. Determining the order-up-to levels and the orders for the retailers’ demands in an isolated manner neglects the correlation of the demands and the relevant risk pooling effects associated with the network structure of the supply chains are disregarded. It is illustrated that the bullwhip effects are significantly reduced with consideration of potential correlation between the retailers’ demand.


2015 ◽  
Vol 734 ◽  
pp. 216-219
Author(s):  
Hai Feng Guo

Through the effective integration of the traditional channel and Internet channel, Dual-channel E-commerce is so important in the supply chain. In this paper, a state space dynamic model of a Dual-channel E-commerce closed-loop supply chain networks is established, which includes the manufacturer, the distributor, the consumer and the reverse logistics including the remanufacturing and the gratuitous return. An l2 norm of the model’s transfer function is described as a method to quantify the bullwhip effect. In order to minimize of the up bound of the bullwhip effect, the linear matrix inequality approach is applied to design H∞ control strategy under the uncertain conditions. A simulation number example indicates the proposed algorithm is effective and feasible.


Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Junhai Ma ◽  
Liqing Zhu ◽  
Ye Yuan ◽  
Shunqi Hou

With the purpose of researching the bullwhip effect when there is a callback center in the supply chain system, this paper establishes a new supply chain model with callback structure, which has a material supplier, a manufacture, and two retailers. The manufacture and retailers all employ AR(1) demand processes and use order-up-to inventory policy when they make order decisions. Moving average forecasting method is used to measure the bullwhip effect of each retailer and manufacture. We investigate the impact of lead-times of retailers and manufacture, forecasting precision, callback index, and marketing share on the bullwhip effect of both retailers and manufacture. Then we use the method of numerical simulation to indicate the different parameters in this supply chain. Furthermore, this paper puts forward some suggestions to help the enterprises to control the bullwhip effect in the supply chain with callback structure.


2021 ◽  
Vol 4 ◽  
pp. 45-69
Author(s):  
Houssein Hellani ◽  
Layth Sliman ◽  
Abed Ellatif Samhat ◽  
Ernesto Exposito

Modern IT technologies shaped the shift in economic models with many advantages on cost, optimization, and time to market. This economic shift has increased the need for transparency and traceability in supply chain platforms to achieve trust among partners. Distributed ledger technology (DLT) is proposed to enable supply chains systems with trust requirements. In this paper, we investigate the existing DLT-based supply chain projects to show their technical part and limitations and extract the tools and techniques used to avoid the DLT scalability issue. We then set the requirements for a typical DLT-based supply chain in this context. The analyses are based on the scalability metrics such as computing, data storage, and transaction fees that fit the typical supply chain system. This paper highlights the effects of Blockchain techniques on scalability and their incorporation in supply chains systems. It also presents other existing solutions that can be applied to the supply chain. The investigation shows the necessity of having such tools in supply chains and developing them to achieve an efficient and scalable system. The paper calls for further scalability enhancements throughout introducing new tools and/or reutilize the current ones. Doi: 10.28991/esj-2021-SP1-04 Full Text: PDF


Sign in / Sign up

Export Citation Format

Share Document