scholarly journals A Comprehensive Presentation of the Turbulent Plane Jet Theory with Passive Scalar

2017 ◽  
Vol 2017 ◽  
pp. 1-11
Author(s):  
D. Violeau

We present a unified vision of the existing theoretical models for the turbulent plane jet, leading to new analytical profiles for scalar concentration and turbulent quantities, including a complete turbulent kinetic energy budget. Integrals of the budget terms are also computed. The present model is split into two variants. Both compare fairly well with referenced experimental data.

2002 ◽  
Vol 473 ◽  
pp. 103-145 ◽  
Author(s):  
C. B. da SILVA ◽  
O. MÉTAIS

The influence of the coherent structures on grid/subgrid-scale (GS/SGS) interactions in free shear layers is analysed through the application of a top-hat filter to several plane jet direct numerical simulations (DNS). The Reynolds number based on the plane jet inlet slot width is Reh = 3000. The study deals with energy containing (Kelvin–Helmholtz) and inertial range (streamwise) vortices, from the far field of the turbulent plane jet. The most intense kinetic energy exchanges between GS and SGS occur near these structures and not randomly in the space. The GS kinetic energy is dominated by GS advection and GS pressure/velocity interactions which appear located next to the Kelvin–Helmholtz rollers. Surprisingly, GS/SGS transfer is not very well correlated with the coherent vortices and GS/SGS diffusion plays an important role in the local dynamics of both GS and SGS kinetic energy. The so-called ‘local equilibrium assumption’ holds globally but not locally as most viscous dissipation of SGS kinetic energy takes place within the vortex cores whereas forward and backward GS/SGS transfer occurs at quite different locations. Finally, it was shown that SGS kinetic energy advection may be locally large as compared to the other terms of the SGS kinetic energy transport equation.


2014 ◽  
Vol 5 (3) ◽  
pp. 982-992 ◽  
Author(s):  
M AL-Jalali

Resistivity temperature – dependence and residual resistivity concentration-dependence in pure noble metals(Cu, Ag, Au) have been studied at low temperatures. Dominations of electron – dislocation and impurity, electron-electron, and electron-phonon scattering were analyzed, contribution of these mechanisms to resistivity were discussed, taking into consideration existing theoretical models and available experimental data, where some new results and ideas were investigated.


AIAA Journal ◽  
2001 ◽  
Vol 39 ◽  
pp. 1509-1516 ◽  
Author(s):  
C. Le Ribault ◽  
S. Sarkar ◽  
S. A. Stanley

1985 ◽  
Vol 50 (4) ◽  
pp. 920-929 ◽  
Author(s):  
Jiří Sedláček

CNDO/2 calculations for simple models of adsorption and dehydration reactions of secondary aliphatic and aromatic alcohols on polar catalysts are presented. The models involve selected stages of elimination mechanisms of various types (E1, E2 and E1cB elimination). Calculated quantum chemical quantities were correlated with reported experimental data. It is shown that reactivities for the series of substituted phenylethanols correlate very well with the ease of carbonium ion formation. In the case of aliphatic alcohols, calculated quantities correlate generally with the reactivities on SiO2 and are in anticorrelation with the reactivities on Al2O3.NaOH.


Author(s):  
Hossein Gholizadeh ◽  
Doug Bitner ◽  
Richard Burton ◽  
Greg Schoenau

It is well known that the presence of entrained air bubbles in hydraulic oil can significantly reduce the effective bulk modulus of hydraulic oil. The effective bulk modulus of a mixture of oil and air as pressure changes is considerably different than when the oil and air are not mixed. Theoretical models have been proposed in the literature to simulate the pressure sensitivity of the effective bulk modulus of this mixture. However, limited amounts of experimental data are available to prove the validity of the models under various operating conditions. The major factors that affect pressure sensitivity of the effective bulk modulus of the mixture are the amount of air bubbles, their size and the distribution, and rate of compression of the mixture. An experimental apparatus was designed to investigate the effect of these variables on the effective bulk modulus of the mixture. The experimental results were compared with existing theoretical models, and it was found that the theoretical models only matched the experimental data under specific conditions. The purpose of this paper is to specify the conditions in which the current theoretical models can be used to represent the real behavior of the pressure sensitivity of the effective bulk modulus of the mixture. Additionally, a new theoretical model is proposed for situations where the current models fail to truly represent the experimental data.


2021 ◽  
Author(s):  
Chris Holloway ◽  
Jian-Feng Gu ◽  
Bob Plant ◽  
Todd Jones

<div> <div> <div> <div> <p>The normalized distributions of thermodynamic and dynamical variables both within and outside shallow clouds are investigated through a composite algorithm using large eddy simulation of the BOMEX case. The normalized magnitude is maximum near cloud center and decreases outwards. While relative humidity (RH) and cloud liquid water (<em>q<sub>l </sub></em>) decrease smoothly to match the environment, the vertical velocity, virtual potential temperature (<em>θ<sub>v </sub></em>) and potential temperature (<em>θ</em>) perturbations have more complicated behaviour towards the cloud boundary. Below the inversion layer, <em>θ<sub>v</sub></em> becomes <span>negative before the vertical velocity has turned from updraft to subsiding shell outside the cloud, indicating the presence of a transition zone where the updraft is negatively buoyant. Due to the downdraft outside the cloud and the enhanced horizontal turbulent mixing across the edge, the normalized turbulence kinetic energy (TKE) and horizontal turbulence kinetic energy (HTKE) decrease more slowly from the cloud center outwards than the thermodynamic variables. The distributions all present asymmetric structures in response to the vertical wind shear, with more negatively buoyant air, stronger downdrafts and larger TKE on the downshear side. We discuss several implications of the distributions for theoretical models and parameterizations. Positive buoyancy near cloud base is mostly due to </span><span>the virtual effect of water vapor, emphasising the role of moisture in triggering. The mean vertical velocity is found </span><span>to be approximately half the maximum vertical velocity within each cloud, providing a constraint on some models. Finally, products of normalized distributions for different variables are shown to be able to well represent the vertical heat and moisture fluxes, but they underestimate fluxes in the inversion layer because they do not capture cloud top downdrafts.</span></p> </div> </div> </div> </div>


Sign in / Sign up

Export Citation Format

Share Document