scholarly journals Rational Boreholes Arrangement of Gas Extraction from Unloaded Coal Seam

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chaojun Fan ◽  
Sheng Li ◽  
Haohao Zhang ◽  
Zhenhua Yang
Keyword(s):  
Coal Seam ◽  
Coupling Model ◽  
Extraction Process ◽  
Gas Extraction ◽  
Coal Seams ◽  
Extraction Area ◽  
Mechanical Coupling ◽  
Blind Area ◽  
Blind Extraction ◽  
Seam Mining

In order to enhance gas extraction from unloaded coal seam by drilling borehole in the floor roadway, the mechanism of stress relief improving permeability by protective coal seam mining was analyzed. Based on the multiphysics field theory, the hydraulic-mechanical coupling model of gas extraction in the unloading coal seam was established, and the gas extraction process by drilling borehole in the floor roadway in the overburden of Panyi Coal Mine 1551 (1) panel was simulated. The influence of different drilling arrangements on the gas extraction effect was analyzed. The results show that the permeability of protected coal seams is characterized by zoning and can be divided into the permeability-enhanced zone, the permeability-reduced zone, and the original permeability zone according to the stress state of coal seam. Under the condition of uniform borehole distribution, the gas pressure decreased slowly in the permeability-reduced zone and is still greater than 0.74 MPa after 180 days of extraction, and there is a large extraction blind area in the protected panel. Under the condition of nonuniform borehole distribution arrangement according to the characteristics of permeability zoning, the effective extraction area can almost cover the protected panel, and the blind extraction area is reduced by 91.22% when compared to uniform borehole distribution. These can provide a reference for unloading gas extraction under similar conditions.

scholarly journals Hydraulic-Mechanical Coupling Model with Dual-Porosity Dual-Permeability for Anisotropy Coal Seams and Its Application in Mine Gas Extraction

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Bingjie Huo ◽  
Xuedong Jing ◽  
Aiping He ◽  
Chaojun Fan
Keyword(s):  
Coal Seam ◽  
Pressure Gradient ◽  
Coupling Model ◽  
Dual Porosity ◽  
Gas Extraction ◽  
Anisotropy Coefficient ◽  
Fracture Permeability ◽  
Coal Seams ◽  
Mechanical Coupling ◽  
Matrix Permeability

The parameters of pore-fracture structure and permeability have a controlling effect on the behaviors of gas adsorption/desorption and transportation in coal reservoir. A mathematic model for coal seams is of great significance to evaluate the mass migration within the coal fracture-matrix system. In this paper, the hydraulic-mechanical coupling model considering both dual-porosity dual-permeability and anisotropy characteristics is first established by using the methods of theoretical analysis, nuclear magnetic resonance (NMR) test, and numerical simulation. Then, this model is applied to simulate the gas migration characteristics of No. 3 coal seam in Changping Mine, China. Results show that the pore structure of No. 3 coal seam is characterized by small radius of pores and pore throats, which is determined by the NMR test, verifying the dual-permeability dual-porosity of coal seams. Both matrix permeability and fracture permeability increase approximately linearly with the process of mine gas extraction. The increased magnitude of the matrix permeability is greater than that of the fracture permeability. The permeability is inversely proportional to the anisotropy coefficient. The pressure gradient within the coal matrix and fracture increases first and then decreases with the extraction time. This pressure gradient is proportional to the anisotropy coefficient at the early stage of extraction and is inversely proportional to the anisotropy coefficient at the later stage. The seepage and diffusion flux are proportional to the anisotropy coefficient. The proportion of matrix-to-fracture seepage flux to the total flux increases first and then decreases to a certain value. The proposed model provides a guide for accurate designation of gas extraction from coal seams.

scholarly journals Numerical simulation investigations of coalbed methane drainage performance with multilateral well

2021 ◽  
Vol 11 (3) ◽  
pp. 1303-1321
Author(s):  
Songze Liu ◽  
Jianguang Wei ◽  
Yuanyuan Ma ◽  
Hongliang Liu ◽  
Xuemei Liu ◽  
...  
Keyword(s):  
Coalbed Methane ◽  
Length Distribution ◽  
Coupling Model ◽  
Extraction Process ◽  
Gas Extraction ◽  
Intersection Angle ◽  
Ratio Distribution ◽  
Mechanical Coupling ◽  
Cumulative Production ◽  
Positive Effect

AbstractA novel multilateral well for coalbed methane extraction was proposed in the study. There is a main wellbore at the longitudinal center of coal seam and four lateral wells at the horizontal center in the multilateral-well system. Compared with traditional drainage holes, multilateral-well system has a better performance on coalbed methane development. A hydraulic-mechanical coupling model of multilateral well was established, the pressure and permeability ratio distribution of the gas extraction process were analyzed comprehensively. The sensitivity analysis of lateral number, length distribution and intersection angle of multilateral-well system were studied. The results indicate that there is a minimum gas pressure distribution around the multilateral well and the overall permeability of coal seams increases with production time and the permeability around the multilateral well is larger than the area away from the multilateral well which induced by the gas desorb and matrix shrink. The quantity of lateral wells has a positive effect on cumulative production. When the total length of lateral wells is equal, the uniformity and symmetry of lateral length distribution are two key factors on the gas extraction performance. The minimum intersection angle has a positive effect on cumulative production. This study provides a better alternative for traditional drainage hole to obtain greater coalbed methane performance.

scholarly journals Coal Seam Gas Extraction by Integrated Drillings and Punchings from the Floor Roadway considering Hydraulic-Mechanical Coupling Effect

Geofluids ◽  
2022 ◽  
Vol 2022 ◽  
pp. 1-10
Author(s):  
Chaojun Fan ◽  
Haiou Wen ◽  
Sheng Li ◽  
Gang Bai ◽  
Lijun Zhou
Keyword(s):  
Coal Seam ◽  
Coal Mines ◽  
Coupling Model ◽  
Gas Pressure ◽  
Gas Content ◽  
Engineering Practice ◽  
Gas Extraction ◽  
Coal Seam Gas ◽  
Mechanical Coupling ◽  
Gas Disasters

Owing to the exhaustion of shallow coal resources, deep mining has been occupied in coal mines. Deep buried coal seams are featured by the great ground stress, high gas pressure, and low permeability, which boost the risk of gas disasters and thus dramatically threaten the security about coal mines. Coal seam gas pressure and gas content can be decreased by gas extraction, which is the primary measure to prevent and control mine gas disasters. The coal mass is simplified into a continuous medium with dual structure of pores and fractures and single permeability. In consideration of the combined effects of gas slippage and two-phase flow, a hydraulic-mechanical coupling model for gas migration in coals is proposed. This model involves the equations of gas sorption and diffusion, gas and water seepage, coal deformation, and evolution of porosity and permeability. Based on these, the procedure of gas extraction through the floor roadway combined with hydraulic punching and ordinary drainage holes was simulated, and the gas extraction results were used to evaluate the outburst danger of roadway excavation and to verify the engineering practice. Results show that gas extraction can reduce coal seam gas pressure and slow down the rate of gas release, and the established hydraulic-mechanical coupling model can accurately reveal the law of gas extraction by drilling and punching boreholes. After adopting the gas extraction technology of drilling and hydraulic punching from the floor roadway, the remaining gas pressure and gas content are reduced to lower than 0.5 MPa and 5.68 m3/t, respectively. The achievements set a theoretical foundation to the application of drilling and punching integrated technology to enhance gas extraction.

scholarly journals Fully Coupled Multi-Scale Model for Gas Extraction from Coal Seam Stimulated by Directional Hydraulic Fracturing

2019 ◽  
Vol 9 (21) ◽  
pp. 4720 ◽  
Author(s):  
Ge ◽  
Zhang ◽  
Sun ◽  
Hu
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Scale Model ◽  
Gas Extraction ◽  
Coal Seams ◽  
Directional Hydraulic Fracturing ◽  
Coal Mine Methane ◽  
Multi Scale ◽  
Fully Coupled

Although numerous studies have tried to explain the mechanism of directional hydraulic fracturing in a coal seam, few of them have been conducted on gas migration stimulated by directional hydraulic fracturing during coal mine methane extraction. In this study, a fully coupled multi-scale model to stimulate gas extraction from a coal seam stimulated by directional hydraulic fracturing was developed and calculated by a finite element approach. The model considers gas flow and heat transfer within the hydraulic fractures, the coal matrix, and cleat system, and it accounts for coal deformation. The model was verified using gas amount data from the NO.8 coal seam at Fengchun mine, Chongqing, Southwest China. Model simulation results show that slots and hydraulic fracture can expand the area of gas pressure drop and decrease the time needed to complete the extraction. The evolution of hydraulic fracture apertures and permeability in coal seams is greatly influenced by the effective stress and coal matrix deformation. A series of sensitivity analyses were performed to investigate the impacts of key factors on gas extraction time of completion. The study shows that hydraulic fracture aperture and the cleat permeability of coal seams play crucial roles in gas extraction from a coal seam stimulated by directional hydraulic fracturing. In addition, the reasonable arrangement of directional boreholes could improve the gas extraction efficiency. A large coal seam dip angle and high temperature help to enhance coal mine methane extraction from the coal seam.

scholarly journals Failure Mechanism and Control Technology of Thick and Soft Coal Fully Mechanized Caving Roadway under Double Gobs in Close Coal Seams

2020 ◽  
Vol 2020 ◽  
pp. 1-23
Author(s):  
Shengrong Xie ◽  
Xiaoyu Wu ◽  
Dongdong Chen ◽  
Yaohui Sun ◽  
En Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Field Distribution ◽  
Control Technology ◽  
Coal Seams ◽  
Anchor Bolt ◽  
Anchor Cable ◽  
Coal Pillars ◽  
Seam Mining ◽  
And Control

The surrounding rock of the roadway under double gobs in the lower coal seams is partially damaged by the mining of the upper coal seam and the stress superimposition of the stepped coal pillars. What is worse, the upper layer of the roof is collapse gangue in double gobs, which makes the anchor cable unable to anchor the reliable bearing layer, so the anchoring performance is weakened. The actual drawing forces of the anchor bolt and anchor cable are only approximately 50 kN and 80 kN, respectively. The roadway develops cracks and large deformations with increasing difficulty in achieving safe ventilation. In view of the above problems, taking the close coal seam mining in the Zhengwen Coal Mine as the engineering background, a theoretical calculation is used to obtain the loading of the step coal pillars and the slip line field distribution of the floor depth. The numerical simulation monitors the stress superimposition of stepped coal pillars and the distribution of elastoplastic areas to effectively evaluate the layout of mining roadways. The numerical simulation also analyzes the effective prestress field distribution of the broken roof and grouting roof anchor cable. A laboratory test was used to monitor the strength of the grouting test block of the broken coal body. Then, we proposed that grouting anchor cable be used to strengthen the weak surface of the roof and block the roof cracks. From on-site measurement, the roadway was seen to be arranged in the lateral stress stabilization area of the stepped coal pillars, the combined support technology of the grouting anchor cable (bolt) + U type steel + a single prop was adopted, the roadway deformation was small, the gas influx was reduced, and the drawing force of the anchor bolt and the anchor cable was increased to approximately 160 kN and 350 kN, respectively. The overall design and control technology of the roadway can meet the site safety and efficient production requirements.

scholarly journals Investigation of Large-Diameter Borehole for Enhancing Permeability and Gas Extraction in Soft Coal Seam

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yongwen Wang ◽  
Wanjun Yan ◽  
Zhongjiu Ren ◽  
Zhiqiang Yan ◽  
Ziwen Liu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Shear Failure ◽  
Large Diameter ◽  
Gas Content ◽  
Gas Extraction ◽  
Extraction Area ◽  
Damage Area ◽  
Soft Coal ◽  
Coal Deformation ◽  
Soft Coal Seam

The efficiency of gas extraction from the soft coal seam with ultralow permeability is low. Gas extraction with large-diameter borehole is proposed to deplete gas content for preventing gas outburst disaster in this study. The fractures around the large borehole will enhance the permeability in the damage area to promote gas extraction. We established a damage-stress-seepage coupling model for large-diameter borehole gas extraction in soft coal seam. This mathematical model contains governing equations of gases sorption and transport, coal deformation, and damage, reflecting the coupling responses between gas and coal seam. The model is solved by the finite element method to simulate the gas drainage large-diameter borehole through roadway. Distributions of elastic modulus, damage area, and maximum principal stress in soft coal seam with different borehole diameters including 94 mm, 133 mm, 200 mm, and 300 mm are analyzed. The gas pressure, gas content, and effective extraction area in soft coal seam are discussed. Results show that the shear failure zone appears around the large-diameter borehole, and its permeability rises sharply. This opens up the gas transport channel and is conducive to the rapid extraction. It is confirmed that gas extraction using large-diameter borehole (300 mm) can greatly improve the efficiency of the gas preextraction in soft coal seam by increasing gas extraction rate. These provide a foundation for guiding the operation of gas extraction with large borehole from the soft coal seam in the field.

scholarly journals Height of the Fractured Zone in Coal Mining under Extra-Thick Coal Seam Geological Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Dequan Sun ◽  
Xiaoyan Li ◽  
Zhijie Zhu ◽  
Yang Li ◽  
Fang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Process Analysis ◽  
Failure Process ◽  
Analysis Method ◽  
Coal Seams ◽  
Fractured Zone ◽  
Seam Mining ◽  
Borehole Televiewer ◽  
Overlying Strata

The height of the fractured zone caused by coal mining is extremely significant for safely mining under water, water conservation, and gas treatment. At present, the common prediction methods of overburden fractured zone height are only applicable to thin and medium-thick coal seams, not suitable for thick and extra-thick coal seams. In order to determine the overburden fractured zone distribution characteristics of extra-thick seam mining, failure process analysis method of overlying strata was proposed based on key strata theory. This method was applied to 15 m coal seam of Tongxin coal mine, and fractured zone height was determined to be 174 m for 8100 panel. EH4 electromagnetic image system and borehole televiewer survey were also conducted to verify the theory results. The distribution of the electrical conductivity showed that the failure height was 150–170 m. Observation through the borehole televiewer showed that the fractured zone height was 171 m. The results of the two field test methods showed that the fractured zone height was 150–171 m, and it was consistent with the theory calculation results. Therefore, this failure process analysis method of overlying strata can be safely used for other coal mines.

Effect of protective coal seam mining and gas extraction on gas transport in a coal seam

2016 ◽  
Vol 26 (4) ◽  
pp. 637-643 ◽  
Author(s):  
Banghua Yao ◽  
Qingqing Ma ◽  
Jianping Wei ◽  
Jianhong Ma ◽  
Donglin Cai
Keyword(s):  
Coal Seam ◽  
Gas Transport ◽  
Gas Extraction ◽  
Seam Mining

scholarly journals Fracture evolution and gas transport laws of coal and rock in one kilometer deep coal mine with complicated conditions

2019 ◽  
Vol 23 (Suppl. 3) ◽  
pp. 907-915
Author(s):  
Jianguo Zhang ◽  
Man Wang ◽  
Yingwei Wang
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Coal Mine ◽  
Fracture Zone ◽  
Gas Flow ◽  
Gas Transport ◽  
Enhancement Effect ◽  
Gas Extraction ◽  
Coal Seams ◽  
Long Distance

As coal mining gradually extends deeper, coal seams in China generally show high stress, high gas pressure and low permeability, bringing more difficulty to coal mining. Therefore, in order to strengthen gas extraction, it is necessary to carry out reservoir reconstruction after deep coal seams reached. In this paper, the distribution and evolution laws of fracture zone overlaying strata of J15 seam in Pingdingshan No. 10 coal mine after excavation were studied by combining similar simulation and numerical simulation, meanwhile, the gas transport law within fracture zone was numerically simulated. The results show that the fracture zone reaches a maximum of 350 mm in the vertical direction and is 75 mm away from W9,10 coal seams in vertical distance. Since W9,10 coal seams are in an area greatly affected by the bending zone of J15 coal seam under the influence of mining, the mining of J15 coal seam will exert a strong permeability enhancement effect on W9,10 coal seams. The J15 coal seam can act as a long-distance protective layer of W9,10 coal seams to eliminate the outburst danger of the long-distance coal seams in bending zone with coal and gas outburst danger, thereby achiev?ing safe, productive and efficient integrated mining of coal and gas resources. The gas flux of mining-induced fractures in the trapezoidal stage of mining-induced fracture field is far greater than that in the overlaying stratum matrix. The horizontal separation fractures and vertical broken fractures within the mining-induced fracture field act as passages for gas-flow. Compared with gas transport in the overlaying stratum matrix, the horizontal separation fractures and vertical broken fractures within the mining-induced fracture field play a role in guiding gas-flow. The research results can provide theoretical support for the arrangement of high-level gas extraction boreholes in roof fracture zones.

scholarly journals Influence of Valleys Terrain on Pressure of Fully Mechanized Working Faces in Shallow Coal Seams

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
YingJie Liu ◽  
Qingjie Qi ◽  
Anhu Wang
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Rock Fracture ◽  
Mine Pressure ◽  
Overburden Rock ◽  
Coal Seams ◽  
Valley Bottom ◽  
Key Stratum ◽  
Seam Mining ◽  
The Impact

The absence of a key stratum during overburden rock movement is crucial to the mining pressure of fully mechanized coal mining faces. Using physical and numerical simulations, the 21304 mechanized mining in Daliuta and Huojitu coal mining faces 1−2 appeared twice during a pressure frame accident analysis. The results indicate that a lack of key overlying strata is crucial to the mining of lower coal seams, particularly for the upper sections of a single key stratum of coal. When the key stratum of the upper coal seam is absent, a stable masonry structure is formed after mining. It is easy to form stable stacked strata at the bottom of a coal seam. When developing gullies in deep terrains, the formation of the key stratum will be an upper rock fracture affected by the impact, resulting in a partial absence of the key stratum. When the key stratum is absent, the mining of upslope working faces and the probability of dynamic strata pressure increase with the overburden on the working face and mining of downslope faces. The face mine pressure development laws on the upper and lower coal seam mining were similar, mainly manifesting as “slope section >valley bottom section >back slope section.”

Sign in / Sign up

Export Citation Format

Share Document