scholarly journals Rockburst Characteristics and Mechanisms during Steeply Inclined Thin Veins Mining: A Case Study in Zhazixi Antimony Mine, China

2018 ◽  
Vol 2018 ◽  
pp. 1-16
Author(s):  
Yuanjun Ma ◽  
Changwu Liu ◽  
Fan Wu ◽  
Xiaolong Li
Keyword(s):  
Numerical Simulation ◽  
Elastic Strain ◽  
Strain Energy ◽  
High Stress ◽  
Elastic Strain Energy ◽  
Compression Tests ◽  
High Stress Concentration ◽  
Mining Depth

With the increase of mining depth, rockbursts have become important safety problems in Zhazixi Antimony Mine, where overlying strata exceed 560 m. Due to the small spacing between the steeply inclined veins, mining activities have great influences on rockbursts of adjacent veins. In order to study rockburst characteristics and mechanisms in Zhazixi Antimony Mine, in situ measurement, field geological survey, uniaxial compression tests, and numerical simulation are conducted to analyze rockburst proneness and simulate the elastic strain energy accumulation characteristics. Consequently, rockburst proneness criteria are established on the basis of experimental results to propose the necessary lithologic conditions for rockburst aiming to Zhazixi Antimony Mine. Rockburst dangerous districts are defined based on high stress concentration and elastic strain energy distribution characteristics in mining process obtained by theory analysis and numerical simulation. Accordingly, it is suggested that thrown-type rockbursts mainly occur in massive stibnite of ventilation shafts and stopes where the elastic strain energy exceeds 300 kJ·m−3, spalling-type rockbursts generally appear in slate of roadways where the elastic strain energy exceeds 100 kJ·m−3, and ejection-type rockbursts arise in different rock masses under a certain condition. Last but not the least, prediction results are basically consistent with statistics data of rockburst events after comparative analysis.

Numerical Simulation Study on the Delay of Rockburst Based on Rock Mass Stress Release Rate

2014 ◽  
Vol 501-504 ◽  
pp. 20-26 ◽  
Author(s):  
Cheng Lin Yao ◽  
Jie Chen ◽  
Li Peng Liu
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Energy Distribution ◽  
Release Rate ◽  
Elastic Strain ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
Simulation Software ◽  
Stress Release ◽  
Shear Field

Rockburst is a phenomenon of geological hazard due to excavation in brittle rockmass of high in-situ stress which endanger to the engineers and construction equipments with unexpectedly damaged. At present, researchers and engineers mainly concentrate to the requirement of rockburst and whether to arise. Although the delay characteristic of rockburst (DCR) has been realized and recorded, but the knowledge of the mechanism of this feature is insufficient. In the paper, the delay characteristic was researched from the stress release rate (SRR) of the excavation rock mass using the numerical simulation software. Firstly, using the core replacement technique, the relation of the SRR and core modulus reduction (CMR) was determined. Secondly, the mechanism of the DCR was analyzed from the elastic strain energy distribution and the plastic strain energy distribution in the different SRR. Finally, the plastic field shape and range under different SRR was contrasted and analyzed. Conclusions can be drawn as follows: with the increase of CMR value, the SRR shows increase trend in the form of exponent. In the process of excavation, the rockmass elastically deform under the low SRR value. When the SRR value equals certain degree, the portion of rockmass will be plastic field and behind the plastic region there will be arise a elastic strain energy centralized phenomenon. Under the different the SRR value, the field style change to the tension-shear field from the shear field in the rock mass and the rockburst rank obviously different.

scholarly journals Experimental Investigation on Deformation and Strength Behavior of Marble with the Complex Loading-Unloading Stress Path

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Chen Chen ◽  
Lipeng Liu ◽  
Yu Cong
Keyword(s):  
Elastic Strain ◽  
Strain Energy ◽  
High Stress ◽  
Elastic Strain Energy ◽  
Complex Loading ◽  
Energy Criterion ◽  
Confining Pressure ◽  
Stress Path ◽  
Surrounding Rock ◽  
Strength Behavior

The excavation of deep tunnel in rock mass undergoes complex loading and unloading stress paths, resulting in rib spalling, flaking, and even severe rockburst disasters. Based on the variation law of the stress path of the surrounding rock, laboratory tests of rock mechanics are designed, and the deformation and strength behavior of marble with different initial confining pressure and unloading rates are systematically studied. By introducing strain increment, the characteristic stress, and the dilatancy index, the rock’s dilatancy and brittleness under different unloading conditions are quantitatively analyzed. During unloading, the energy transformation mechanism of rock is described, and the law of deformation and failure is discussed based on characteristic energy. The rock failure strength fitting formula is given by applying the Mogi–Coulomb criterion and elastic strain energy criterion. The advantages of the elastic strain energy criterion are theoretically explained. This study shows that comprehensive consideration of the complex stress paths, confining pressure levels, and the loading-unloading rates of surrounding rock is an effective way to accurately study unloading rock characteristics. The results can provide theoretical basis for stability analysis of high-stress underground engineering.

scholarly journals Behavior of Offshore Pile in Calcareous Sand—Case Study

2021 ◽  
Vol 9 (8) ◽  
pp. 839
Author(s):  
Tarek N. Salem ◽  
Nadia M. Elkhawas ◽  
Ahmed M. Elnady
Keyword(s):  
Load Capacity ◽  
High Stress ◽  
Embedment Depth ◽  
Shear Stresses ◽  
Northern Coast ◽  
Compression Tests ◽  
Calcareous Sand ◽  
Element Analysis ◽  
Mixing Ratios

The erosion of limestone and calcarenite ridges that existed parallel to the Mediterranean shoreline forms the calcareous sand (CS) formation at the surface layer of Egypt's northern coast. The CS is often combined with broken shells which are considered geotechnically problematic due to their possible crushability and relatively high compressibility. In this research, CS samples collected from a site along the northern coast of Egypt are studied to better understand its behavior under normal and shear stresses. Reconstituted CS specimens with different ratios of broken shells (BS) are also investigated to study the effect of BS ratios on the soil mixture strength behavior. The strength is evaluated using laboratory direct-shear and one-dimensional compression tests (oedometer test). The CS specimens are not exposed to significant crushability even under relatively high-stress levels. In addition, a 3D finite element analysis (FEA) is presented in this paper to study the degradation offshore pile capacity in CS having different percentages of BS. The stress–strain results using oedometer tests are compared with a numerical model, and it gave identical matching for most cases. The effects of pile diameter and embedment depth parameters are then studied for the case study on the northern coast. Three different mixing ratios of CS and BS have been used, CS + 10% BS, CS + 30% BS, and CS + 50% BS, which resulted in a decrease of the ultimate vertical compression pile load capacity by 8.8%, 15%, and 16%, respectively.

Do muscles function as adaptable locomotor springs?

2002 ◽  
Vol 205 (15) ◽  
pp. 2211-2216 ◽  
Author(s):  
Stan L. Lindstedt ◽  
Trude E. Reich ◽  
Paul Keim ◽  
Paul C. LaStayo
Keyword(s):  
Skeletal Muscle ◽  
Elastic Strain ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
Normal Animal ◽  
Eccentric Contractions ◽  
Normal Muscle ◽  
Energetic Costs ◽  
Locomotor Muscles ◽  
Power Outputs

SUMMARYDuring normal animal movements, the forces produced by the locomotor muscles may be greater than, equal to or less than the forces acting on those muscles, the consequences of which significantly affect both the maximum force produced and the energy consumed by the muscles. Lengthening (eccentric)contractions result in the greatest muscle forces at the lowest relative energetic costs. Eccentric contractions play a key role in storing elastic strain energy which, when recovered in subsequent contractions, has been shown to result in enhanced force, work or power outputs. We present data that support the concept that this ability of muscle to store and recover elastic strain energy is an adaptable property of skeletal muscle. Further, we speculate that a crucial element in that muscle spring may be the protein titin. It too seems to adapt to muscle use, and its stiffness seems to be`tuned' to the frequency of normal muscle use.

The Elastostatic Axisymmetric Problem of a Cracked Sphere Embedded in a Dissimilar Matrix

1980 ◽  
Vol 47 (3) ◽  
pp. 545-550 ◽  
Author(s):  
R. Kant ◽  
D. B. Bogy
Keyword(s):  
Elastic Strain ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
Companion Paper ◽  
Infinite Medium ◽  
Applied Mechanics ◽  
Axisymmetric Solution ◽  
Material Parameters ◽  
The Difference ◽  
Elastostatic Problem

The axisymmetric elastostatic problem of a cracked sphere embedded in a dissimilar matrix is solved by using the solution for a spherical cavity in an infinite medium together with the axisymmetric solution for a cracked sphere given in the companion paper in this issue of the Journal of Applied Mechanics, Pages 538-544. Numerical results are presented for (a) interface stress for various composites (b) dependence of the stress-intensity factor on the material parameters and ratios of crack to sphere radii, (c) the difference in the elastic strain energy for a cracked and uncracked composite.

scholarly journals Effect of Joint Density on Rockburst Proneness of the Elastic-Brittle-Plastic Rock Mass

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Jiliang Pan ◽  
Fenhua Ren ◽  
Meifeng Cai
Keyword(s):  
Rock Mass ◽  
Elastic Strain ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Joint Density ◽  
Dissipated Energy ◽  
Uniaxial Compression Test ◽  
Plastic Rock

The prediction of rockburst proneness is the basis of preventing and controlling rockburst disasters in rock engineering. Based on energy theory and damage mechanics, the quantitative functional relationship between joint density and energy density was derived. Then, the theoretical results were verified by numerical simulation and uniaxial compression test, and the effect of joint density on rockburst proneness of the elastic-brittle-plastic rock mass was discussed. The results show that the relationship between the joint density and the dissipated energy index of the jointed rock mass is a logarithmic function. With the same total input energy, the higher the joint density, the more the damage dissipation energy. Even in the case of high joint density, the rock mass still has limited resistance to external failure. Under the same joint density, the strength of parallel jointed rock mass is better than that of the cross-jointed rock mass, and the parallel jointed rock mass can accumulate more elastic strain energy and has higher rockburst proneness. The joint density is closely related to the ability of the rock mass to store high strain energy. The higher the joint density is, the weaker the ability to accumulate the elastic strain energy of rock mass is and the lower the rockburst proneness is. It is helpful to predict rockburst proneness by investigating and studying the properties of geological discontinuities. The research results have some theoretical and engineering guiding significance for the prediction of rockburst proneness of the jointed rock mass.

scholarly journals Dynamic Stability Critical State of Pin-Ended Arches under Sudden Central Concentrated Load

Mechanika ◽  
2020 ◽  
Vol 26 (5) ◽  
Author(s):  
Kai QIN ◽  
Jingyuan LI ◽  
Mengsha LIU ◽  
Jinsan JU
Keyword(s):  
Finite Element ◽  
Critical Load ◽  
Critical State ◽  
Elastic Strain ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
The State ◽  
Energy Principle ◽  
Concentrated Load ◽  
Elastic Plastic

The dynamic in-plane instability process of extreme point type for pin-ended arches when a central radial load applied suddenly with infinite duration is analyzed with finite element method in this study. The state of arch can be determined by the crown’s vertical displacement varied with time and the critical load can be obtained by repeating trial-calculation. When the arch structure reaches the dynamically stable critical state, the kinetic energy of the structure is very small or even zero. The dynamic critical load of elastic arch calculated with the theoretical analysis method which is based on energy principle is proved accuracy enough by comparing with the finite element calculation results and the percentage of the differences between them are no more than 4.5 %. The maximal elastic strain energy is certain for the elastic-plastic arch in certain geometry under both a sudden load and static load. The maximal elastic strain energy in static calculation can be used in determining the state of the elastic-plastic arch under dynamic sudden loads applied and this method is more accurate which errors won’t exceed 3.5 %. The accuracy of dynamic critical load calculation method for elastic arch is verified by numerical calculation in this study, and based on the characteristic of elastic strain energy in critical state, a method for determining the stability of elastic-plastic arch is presented.

Sign in / Sign up

Export Citation Format

Share Document