A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility

Scaffolds play an important role in tissue engineering and their structure and biocompatibility have great influence on cell behaviors. In this study, poly(l-lactide-co-ε-caprolactone) (PLCL) scaffolds were printed by a 3D printing technology, low-temperature deposition manufacturing (LDM), and then PLCL scaffolds were treated by alkali and coated with collagen type I (COLI). The scaffolds were characterized by scanning electron microscopy (SEM), porosity test, mechanical test, and infrared spectroscopy. The prepared PLCL and PLCL-COLI scaffolds had three-dimensional (3D) porous structure and they not only have macropores but also have micropores in the deposited lines. Although the mechanical property of PLCL-COLI was slightly lower than that of PLCL scaffold, the hydrophilicity of PLCL-COLI was significantly enhanced. Rabbit articular chondrocytes were extracted and were identified as chondrocytes by toluidine blue staining. To study the biocompatibility, the chondrocytes were seeded on scaffolds for 1, 3, 5, 7, and 10 days. MTT assay showed that the proliferation of chondrocytes on PLCL-COLI scaffold was better than that on PLCL scaffold. And the morphology of cells on PLCL-COLI after 1-day culture was much better than that on PLCL. This 3D-printed PLCL scaffold coated with COLI shows a great potential application in tissue engineering.

Download Full-text

Collagen Expression in Tissue Engineered Cartilage of Aged Human Articular Chondrocytes in a Rotating Bioreactor

The International Journal of Artificial Organs ◽

10.1177/039139880302600407 ◽

2003 ◽

Vol 26 (4) ◽

pp. 319-330 ◽

Cited By ~ 34

Author(s):

S. Marlovits ◽

B. Tichy ◽

M. Truppe ◽

D. Gruber ◽

W. Schlegel

Keyword(s):

Electron Microscopy ◽

Collagen Type ◽

Articular Chondrocytes ◽

Three Dimensional ◽

Collagen Type I ◽

Human Articular Chondrocytes ◽

Type I ◽

Transmission Electron ◽

Low Shear Stress ◽

Engineered Cartilage

This study describes the culture and three-dimensional assembly of aged human articular chondrocytes under controlled oxygenation and low shear stress in a rotating-wall vessel. Chondrocytes cultured in monolayer were released and placed without any scaffold as a single cell suspension in a rotating bioreactor for 12 weeks. Samples were analyzed with immunohistochemistry, molecular biology and electron microscopy. During serial monolayer cultures chondrocytes dedifferentiated to a “fibroblast-like” structure and produced predominantly collagen type I. When these dedifferentiated cells were transferred to the rotating bioreactor, the cells showed a spontaneous aggregation and formation of solid tissue during the culture time. Expression of collagen type II and other components critical for the extracellular cartilage matrix could be detected. Transmission electron microscopy revealed a fine network of randomly distributed collagen fibrils. This rotating bioreactor proves to be a useful tool for providing an environment that enables dedifferentiated chondrocytes to redifferentiate and produce a cartilage-specific extracellular matrix.

Download Full-text

Maintenance of chondrocyte phenotype during expansion on PLLA microtopographies

Journal of Tissue Engineering ◽

10.1177/2041731418789829 ◽

2018 ◽

Vol 9 ◽

pp. 204173141878982 ◽

Cited By ~ 6

Author(s):

Elisa Costa ◽

Cristina González-García ◽

José Luis Gómez Ribelles ◽

Manuel Salmerón-Sánchez

Keyword(s):

Lactic Acid ◽

Type I Collagen ◽

Collagen Type ◽

Articular Chondrocytes ◽

Collagen Type I ◽

Cell Phenotype ◽

Type I ◽

Type Ii ◽

Collagen Type Ii ◽

Chondrocyte Phenotype

Articular chondrocytes are difficult to grow, as they lose their characteristic phenotype following expansion on standard tissue culture plates. Here, we show that culturing them on surfaces of poly(L-lactic acid) of well-defined microtopography allows expansion and maintenance of characteristic chondrogenic markers. We investigated the dynamics of human chondrocyte dedifferentiation on the different poly(L-lactic acid) microtopographies by the expression of collagen type I, collagen type II and aggrecan at different culture times. When seeded on poly(L-lactic acid), chondrocytes maintained their characteristic hyaline phenotype up to 7 days, which allowed to expand the initial cell population approximately six times without cell dedifferentiation. Maintenance of cell phenotype was afterwards correlated to cell adhesion on the different substrates. Chondrocytes adhesion occurs via the α5 β1 integrin on poly(L-lactic acid), suggesting cell–fibronectin interactions. However, α2 β1 integrin is mainly expressed on the control substrate after 1 day of culture, and the characteristic chondrocytic markers are lost (collagen type II expression is overcome by the synthesis of collagen type I). Expanding chondrocytes on poly(L-lactic acid) might be an effective solution to prevent dedifferentiation and improving the number of cells needed for autologous chondrocyte transplantation.

Download Full-text

Rapid and Large-Scale Formation of Chondrocyte Aggregates by Rotational Culture

Cell Transplantation ◽

10.3727/000000003108747037 ◽

2003 ◽

Vol 12 (5) ◽

pp. 475-479 ◽

Cited By ~ 47

Author(s):

Katsuko S. Furukawa ◽

Hideyuki Suenaga ◽

Kenshi Toita ◽

Akiko Numata ◽

Junzo Tanaka ◽

...

Keyword(s):

Culture System ◽

Large Scale ◽

Collagen Type ◽

Articular Chondrocytes ◽

Cell Interaction ◽

Collagen Type I ◽

Cell Contact ◽

Type I ◽

Pellet Culture ◽

Cell Cell

Chondrocytes in articular cartilage synthesize collagen type II and large sulfated proteoglycans, whereas the same cells cultured in monolayer (2D) dedifferentiate into fibroblastic cells and express collagen type I and small proteoglycans. On the other hand, a pellet culture system was developed as a method for preventing the phenotypic modulation of chondrocytes and promoting the redifferentiation of dedifferentiated ones. Because the pellet culture system forms only one cell aggregate each tube by a centrifugator, the pellet could not be applied to produce a tissue-engineered cartilage. Therefore, we tried to form chondrocyte aggregates by a rotational culture, expecting to form a large number of aggregates at once. In order to increase cell–cell interactions and decrease chondrocyte–material interaction, dishes with low retention of protein adsorption and cell adhesiveness were used. In addition, rotational shaking of the dish including cells was attempted to increase the cell–cell interaction. The shaking speed was set at 80 rpm, so the cells would be distributed in the center of the dish to augment the frequency of cell–cell contact. Under these conditions, bovine articular chondrocytes started aggregating in a few hours. At 24–36 h of rotational culture, aggregates with smooth surfaces were observed. Parameters such as increase of culture time and addition of TGF-β controlled diameters of the aggregates. There were many fusiform cells at the periphery of the aggregates, where the cells tended to form a multilayered zone in cross sections. In addition, lacune-like structure, which was almost the same as pellet culture, was observed. It was found that the internal structure of the aggregates was similar to that of pellets reported previously. Therefore, the aggregates formed by a rotational culture could become an essential component to make tissue-engineered artificial cartilage.

Download Full-text

Fabrication of a RP-Based Biomimetic Grafting Material for Bone Tissue Engineering

Materials Science Forum ◽

10.4028/www.scientific.net/msf.626-627.553 ◽

2009 ◽

Vol 626-627 ◽

pp. 553-558 ◽

Cited By ~ 4

Author(s):

Xing Ma ◽

Y.Y. Hu ◽

Xiao Ming Wu ◽

J. Liu ◽

Zhuo Xiong ◽

...

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Collagen Type ◽

Autologous Bone Marrow ◽

Collagen Type I ◽

Control Group ◽

Type I ◽

High Porosity ◽

Highly Porous

Three-dimensional (3D) highly porous poly (DL-lactic-co-glycolic acid)/tricalcium phosphate (PLGA/TCP) scaffolds were fabricated using a rapid prototyping technique (RP). The biopolymer carriers (4mm×4mm×4mm) subsequently were coated with collagen type I (Col) to produce PLGA/TCP/Col composites and utilized as an extracellular matrix for a cell-based strategy of bone tissue engineering. Autologous bone marrow stromal cells (BMSCs) harvested from New Zealand white rabbits were cultured under an osteogenic condition (BMSCs-OB) followed by seeding into the structural highly porous PLGA/TCP/Col composites (i.e. PLGA/TCP/Col/BMSCs-OB). Scanning electron microscopy observation found that the RP-based scaffolds had appropriate microstructure, controlled interconnectivity and high porosity. Modification of the scaffolds with collagen type I (PLGA/TCP/Col) essentially increased the affinity of the carriers to seeding cells, and PLGA/TCP/Col composites were well biocompatible with BMSCs-OB. The PLGA/TCP/Col/BMSCs-OB constructs were then subcutaneously implanted in the back of rabbits compared to controls with autologous BMSCs suspension and carriers alone. As a result, histological new bone formation was observed only in the experimental group with PLGA/TCP/Col/BMSCs-OB constructs 8 weeks after implantation. In the control group with scaffold alone only biodegradation of the carriers was found. Therefore, these results validate our bio-manufacturing methods for a new bone graft substitute.

Download Full-text