scholarly journals Fabrication and Investigation of 26NCA Films Exhibiting Tunable Blue Fluorescence Based on LVPVDM

2018 ◽  
Vol 2018 ◽  
pp. 1-11
Author(s):  
Yufeng Ding ◽  
Liangliang Pan ◽  
Siqi Li ◽  
Huimei He ◽  
Dapeng Zhang ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Potential Application ◽  
Physical Vapor Deposition ◽  
Large Scale ◽  
High Efficiency ◽  
Raw Materials ◽  
Molecular Systems ◽  
Physical Vapor Deposition Method ◽  
New Strategy ◽  
Shoulder Peak

The development of metallic fluorescent materials, π-conjugated molecular systems with high-efficiency generation of blue light, and new ways to fabricate metallic/organic luminescent materials plays an important role in the fields of large-scale flat panel displays and soft optical devices. Herein, different fluorescent films have been fabricated by low vacuum physical vapor deposition method (LVPVDM), including single/two-component films. Compared with raw materials, all films show novel fluorescent behaviors, which means potential application in the fields of multicolor luminescence and thickness-optical response sensors. Meanwhile, the speculation is demonstrated in many ways that the maximum emission (λemmax) at 406 nm and 426 nm of pristine 2,6-naphthalenedicarboxylic acid (26NCA) is caused by the crystal structure, while the shoulder peak at 445 nm is caused by the self-structure of 26NCA molecule. Significantly, this speculation may afford new insight into the relationship between not only crystal structure and luminescence, but also molecular self-structure and luminescence, which means a new strategy to tune the fluorescent behaviors based on molecular self-structure by LVPVDM. Therefore, this work provides a facile way to fabricate single/multicomponent metallic/organic film materials with tunable blue luminescence properties, which have potential application in the fields of next generation of photofunctional materials.

scholarly journals Facile Synthesis of Stacked Ni(OH)2 Hexagonal Nanoplates in a Large Scale

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1407
Author(s):  
Yunfei Du ◽  
Zhijie Xin ◽  
Guodong Li ◽  
Taotao Li
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Formation Mechanism ◽  
Large Scale ◽  
Raw Materials ◽  
Single Crystal Structure ◽  
Facile Synthesis ◽  
Hydrothermal Route ◽  
Hexagonal Nanoplates

Using NiCl2 and NaOH as raw materials, stacked Ni(OH)2 hexagonal nanoplates with different edge lengths were prepared in a large scale by a simple hydrothermal route. The stacked Ni(OH)2 structure was composed of a certain amount of parallel Ni(OH)2 hexagonal nanoplates along the (001) direction. Each parallel Ni(OH)2 nanoplate had a single-crystal structure, and the exposed planes were (001), (00−1), and (100). The formation mechanism of the stacked Ni(OH)2 structures was discussed on the basis of the Ni(OH)2 crystal structure.

scholarly journals Enhanced Efficiency of Graphene-silicon Schottky Junction Solar Cell through Pyramid Arrays Texturation

2021 ◽  
Author(s):  
Cheng Li ◽  
Yichen Ma ◽  
Xiyao Zhang ◽  
Xiuhua Chen ◽  
Fengshuo Xi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Large Scale ◽  
High Efficiency ◽  
Low Cost ◽  
Surface Texturing ◽  
Schottky Junction ◽  
Etching Time ◽  
Uniform Size ◽  
Si Solar Cells ◽  
New Strategy

Abstract Graphene/silicon (Gr/Si) Schottky junction solar cells have attracted extensive research interest due to their simple structure and potential low-cost. Surface texturing is an important part of high-efficiency solar cells. In this paper, the effects of TMAH concentration, IPA concentration and etching time on the structure and anti-reflection ability of silicon pyramid array (SiPa) were systematically studied to obtain uniform and reliable pyramid array. Under the optimized conditions, a large scale SiPa with uniform size distribution was obtained and applied to Gr/Si solar cells. The results show that the TMAH etched SiPa has a better Schottky junction contact between graphene and the SiPa surface, and the SiPa can further improves the ability of collecting photogenerated carriers. Compared with Gr/Si solar cells, the power conversion efficiency (PCE) of Gr/SiPa device is 1.66 times higher than that of Gr/Si solar cells. Finally, Gr/SiPa devices with PCE of 5.67% is successfully obtained by HNO3 doping. This work proposes a new strategy for TMAH etching SiPa to improve the performance of Gr/Si solar cells.

The Potential of Photoelectrochemical Carbon Sinks

2018 ◽  
Author(s):  
Matthias May ◽  
Kira Rehfeld
Keyword(s):  
Global Warming ◽  
High Temperature ◽  
Greenhouse Gas ◽  
Large Scale ◽  
High Efficiency ◽  
Carbon Sink ◽  
Solar Fuels ◽  
Negative Emissions ◽  
Viable Approach ◽  
Low Sensitivity

Greenhouse gas emissions must be cut to limit global warming to 1.5-2C above preindustrial levels. Yet the rate of decarbonisation is currently too low to achieve this. Policy-relevant scenarios therefore rely on the permanent removal of CO<sub>2</sub> from the atmosphere. However, none of the envisaged technologies has demonstrated scalability to the decarbonization targets for the year 2050. In this analysis, we show that artificial photosynthesis for CO<sub>2</sub> reduction may deliver an efficient large-scale carbon sink. This technology is mainly developed towards solar fuels and its potential for negative emissions has been largely overlooked. With high efficiency and low sensitivity to high temperature and illumination conditions, it could, if developed towards a mature technology, present a viable approach to fill the gap in the negative emissions budget.<br>

The Potential of Photoelectrochemical Carbon Sinks

2018 ◽  
Author(s):  
Matthias May ◽  
Kira Rehfeld
Keyword(s):  
Global Warming ◽  
High Temperature ◽  
Greenhouse Gas ◽  
Large Scale ◽  
High Efficiency ◽  
Carbon Sink ◽  
Solar Fuels ◽  
Negative Emissions ◽  
Viable Approach ◽  
Low Sensitivity

Greenhouse gas emissions must be cut to limit global warming to 1.5-2C above preindustrial levels. Yet the rate of decarbonisation is currently too low to achieve this. Policy-relevant scenarios therefore rely on the permanent removal of CO<sub>2</sub> from the atmosphere. However, none of the envisaged technologies has demonstrated scalability to the decarbonization targets for the year 2050. In this analysis, we show that artificial photosynthesis for CO<sub>2</sub> reduction may deliver an efficient large-scale carbon sink. This technology is mainly developed towards solar fuels and its potential for negative emissions has been largely overlooked. With high efficiency and low sensitivity to high temperature and illumination conditions, it could, if developed towards a mature technology, present a viable approach to fill the gap in the negative emissions budget.<br>

Peculiarities of the phytosanitary state of pome fruits in industrial horticulture

2020 ◽  
Vol 60 (1) ◽  
pp. 159-168
Author(s):  
V. V. Antonenko ◽  
A. V. Zubkov ◽  
S. N. Kruchina
Keyword(s):  
Mechanism Of Action ◽  
Large Scale ◽  
High Efficiency ◽  
Fruit Trees ◽  
Fruit Crops ◽  
Planting Material ◽  
Relative Safety ◽  
Pome Fruits ◽  
Weed Plants ◽  
Spread Of Infection

Data were obtained on the basis of the results of research carried out on the territory of the educational and experimental farm of the Timiryazev State Agrarian University, in Moscow during 2018-2019. As a result of the surveys, the most dangerous diseases and pests of pome crops on the territory of this farm were established. The most resistant apple and pear varieties to major diseases have been identified. Peculiarities of development of alternariosis on pear are described, the harmfulness of the disease on pear and apple seedlings is noted. A possible role in the transfer of alternariosis infection from garden-protective plantations and weed vegetation to fruit trees was noted. A possible role has been established in the transport of septoriosis, powdery dew infection from dicotyledonous weeds plants. The peculiarities of the spread of infection under the influence of wind direction are noted. The results and peculiarities of the application of various methods of scaring birds in the orchard are presented. As a result of route surveys the most harmful weed plants have been identified. The possibility of using herbicides of different mechanism of action in fruit gardens for weed control has been studied. High efficiency and relative safety of application of herbicides of contact action in nursery fields, operational orchards and for control of piglets on fruit trees are shown. Recommendations are given for the use of soil and systemic herbicides of soil in seedlings beds, the first and second fields of the nursery, as well as in the process of production of large-scale planting material and operational orchards of fruit crops. The safety of the herbicides in question is established when used in accordance with the recommended methods of use.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

scholarly journals Functionalization of Congo red dye as a light harvester on solar cell

2020 ◽  
Vol 18 (1) ◽  
pp. 287-294
Author(s):  
Harsasi Setyawati ◽  
Handoko Darmokoesoemo ◽  
Irmina Kris Murwani ◽  
Ahmadi Jaya Permana ◽  
Faidur Rochman
Keyword(s):  
Solar Cell ◽  
Congo Red ◽  
Large Scale ◽  
High Efficiency ◽  
Solar Cell Device ◽  
Dye Sensitized ◽  
Congo Red Dye ◽  
Elemental Analyses ◽  
Red Dye ◽  
Solar Cell Technology

AbstractThe demands of ecofriendly technologies to produce a reliable supply of renewable energy on a large scale remains a challenge. A solar cell based on DSSC (Dye-Sensitized Solar Cell) technology is environmentally friendly and holds the promise of a high efficiency in converting sunlight into electricity. This manuscript describes the development of a light harvester system as a main part of a DSSC. Congo red dye has been functionalized with metals (Fe, Co, Ni), forming a series of complexes that serve as a novel light harvester on the solar cell. Metal-congo red complexes have been characterized by UV-VIS and FTIR spectroscopy, and elemental analyses. The performance of metal complexes in capturing photons from sunlight has been investigated in a solar cell device. The incorporation of metals to congo red successfully improved of the congo red efficiency as follows: Fe(II)-congo red, Co(II)-congo red and Ni(II)-congo red had efficiencies of 8.17%, 6.13% and 2.65%, respectively. This research also discusses the effect of metal ions on the ability of congo red to capture energy from sunlight.

scholarly journals Short loop functional commonality identified in leukaemia proteome highlights crucial protein sub-networks

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Sun Sook Chung ◽  
Joseph C F Ng ◽  
Anna Laddach ◽  
N Shaun B Thomas ◽  
Franca Fraternali
Keyword(s):  
Protein Interactions ◽  
Large Scale ◽  
Interaction Network ◽  
Protein Protein Interactions ◽  
Protein Protein Interaction ◽  
Ppi Networks ◽  
Short Loop ◽  
New Strategy ◽  
Loop Network ◽  
Protein Protein Interaction Network

Abstract Direct drug targeting of mutated proteins in cancer is not always possible and efficacy can be nullified by compensating protein–protein interactions (PPIs). Here, we establish an in silico pipeline to identify specific PPI sub-networks containing mutated proteins as potential targets, which we apply to mutation data of four different leukaemias. Our method is based on extracting cyclic interactions of a small number of proteins topologically and functionally linked in the Protein–Protein Interaction Network (PPIN), which we call short loop network motifs (SLM). We uncover a new property of PPINs named ‘short loop commonality’ to measure indirect PPIs occurring via common SLM interactions. This detects ‘modules’ of PPI networks enriched with annotated biological functions of proteins containing mutation hotspots, exemplified by FLT3 and other receptor tyrosine kinase proteins. We further identify functional dependency or mutual exclusivity of short loop commonality pairs in large-scale cellular CRISPR–Cas9 knockout screening data. Our pipeline provides a new strategy for identifying new therapeutic targets for drug discovery.

scholarly journals Synthesis of Metal Organic Frameworks by Ball-Milling

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 15
Author(s):  
Cheng-An Tao ◽  
Jian-Fang Wang
Keyword(s):  
Ball Milling ◽  
Large Scale ◽  
Raw Materials ◽  
Metal Organic Frameworks ◽  
Research Topic ◽  
Mass Ratio ◽  
Time Consumption ◽  
Metal Organic ◽  
Short Time ◽  
Made In

Metal-organic frameworks (MOFs) have been used in adsorption, separation, catalysis, sensing, photo/electro/magnetics, and biomedical fields because of their unique periodic pore structure and excellent properties and have become a hot research topic in recent years. Ball milling is a method of small pollution, short time-consumption, and large-scale synthesis of MOFs. In recent years, many important advances have been made. In this paper, the influencing factors of MOFs synthesized by grinding were reviewed systematically from four aspects: auxiliary additives, metal sources, organic linkers, and reaction specific conditions (such as frequency, reaction time, and mass ratio of ball and raw materials). The prospect for the future development of the synthesis of MOFs by grinding was proposed.

Sign in / Sign up

Export Citation Format

Share Document