scholarly journals A Robust Control for an Aerial Robot Quadrotor under Wind Gusts

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Li Ding ◽  
Zhenwei Wang
Keyword(s):  
Parameter Tuning ◽  
Stability Control ◽  
Euler Method ◽  
Nonlinear Dynamical ◽  
Active Disturbance Rejection ◽  
Wind Gusts ◽  
Disturbance Rejection Control ◽  
Control Scheme ◽  
Aerial Robot ◽  
Linear Extended State Observer

A robust flight controller based on linear active disturbance rejection control (LADRC) is proposed for stability control of an aerial robot quadrotor under wind gusts. The nonlinear dynamical model of the quadrotor, considering the wind disturbance, is firstly established through Newton-Euler method. Subsequently, a robust LADRC technique is proposed to design the controllers for the inner loop and outer loop of the aircraft. In this control scheme, the linear extended state observer (LESO) serves as a compensator which can effectively reject the wind gusts. Then, a method of parameter tuning is introduced to obtain the optimized control performance. Finally, the effectiveness and advantages of the proposed controller are demonstrated through series of simulation case.

Stability control for end effect of mobile manipulator in uneven terrain based on active disturbance rejection control

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Chuang Cheng ◽  
Hui Zhang ◽  
Hui Peng ◽  
Zhiqian Zhou ◽  
Bailiang Chen ◽  
...  
Keyword(s):  
Disturbance Rejection ◽  
Control Method ◽  
External Disturbance ◽  
Stability Control ◽  
Mobile Manipulator ◽  
Active Disturbance Rejection Control ◽  
End Effector ◽  
Content Type ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control

Purpose When the mobile manipulator is traveling on an unconstructed terrain, the external disturbance is generated. The load on the end of the mobile manipulator will be affected strictly by the disturbance. The purpose of this paper is to reject the disturbance and keep the end effector in a stable pose all the time, a control method is proposed for the onboard manipulator. Design/methodology/approach In this paper, the kinematics and dynamics models of the end pose stability control system for the tracked robot are built. Through the guidance of this model information, the control framework based on active disturbance rejection control (ADRC) is designed, which keeps the attitude of the end of the manipulator stable in the pitch, roll and yaw direction. Meanwhile, the control algorithm is operated with cloud computing because the research object, the rescue robot, aims to be lightweight and execute work with remote manipulation. Findings The challenging simulation experiments demonstrate that the methodology can achieve valid stability control performance in the challenging terrain road in terms of robustness and real-time. Originality/value This research facilitates the stable posture control of the end-effector of the mobile manipulator and maintains it in a suitable stable operating environment. The entire system can normally work even in dynamic disturbance scenarios and uncertain nonlinear modeling. Furthermore, an example is given to guide the parameter tuning of ADRC by using model information and estimate the unknown internal modeling uncertainty, which is difficult to be modeled or identified.

scholarly journals High-Order Sliding Mode-Based Fixed-Time Active Disturbance Rejection Control for Quadrotor Attitude System

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 357 ◽  
Author(s):  
Chunlin Song ◽  
Changzhu Wei ◽  
Feng Yang ◽  
Naigang Cui
Keyword(s):  
Disturbance Rejection ◽  
Sliding Mode ◽  
Fixed Time ◽  
High Order ◽  
Extended State Observer ◽  
Active Disturbance Rejection Control ◽  
Extended State ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control ◽  
Control Scheme

This article presents a fixed-time active disturbance rejection control approach for the attitude control problem of quadrotor unmanned aerial vehicle in the presence of dynamic wind, mass eccentricity and an actuator fault. The control scheme applies the feedback linearization technique and enhances the performance of the traditional active disturbance rejection control (ADRC) based on the fixed-time high-order sliding mode method. A switching-type uniformly convergent differentiator is used to improve the extended state observer for estimating and attenuating the lumped disturbance more accurately. A multivariable high-order sliding mode feedback law is derived to achieve fixed time convergence. The timely convergence of the designed extended state observer and the feedback law is proved theoretically. Mathematical simulations with detailed actuator models and real time experiments are performed to demonstrate the robustness and practicability of the proposed control scheme.

Decoupling control of high-purity heat integrated distillation column process via active disturbance rejection control and nonlinear wave theory

2020 ◽  
Vol 42 (12) ◽  
pp. 2221-2233 ◽  
Author(s):  
Yun Cheng ◽  
Zengqiang Chen ◽  
Mingwei Sun ◽  
Qinglin Sun
Keyword(s):  
Nonlinear Wave ◽  
Control Strategy ◽  
High Purity ◽  
Disturbance Rejection ◽  
Distillation Column ◽  
Decoupling Control ◽  
Active Disturbance Rejection Control ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control ◽  
Control Scheme

Although the heat integrated distillation is an energy-efficient and environment-friendly separation technology, it has not been commercialized. One of the reasons is that the nonlinear dynamics and the interactions between various control loops have limited the performance of the traditional control strategy. To achieve a high-purity product concentration, a dynamic decoupling control strategy based on active disturbance rejection control (ADRC) is proposed. The effects of interactions, uncertainties and external disturbances can be estimated and rejected by using extended state observer. Considering the constraints on manipulated variables, an optimized ADRC is designed for the first-order system. Moreover, a concentration observer based on a nonlinear wave model is formulated to reduce the number of sensors. In the simulation research, the related internal model control (IMC), multi-loop ADRC and model predictive control (MPC) are compared with the proposed control scheme. The simulation results demonstrate the advantages of the proposed control scheme on tight control, decoupling performance and disturbance rejection for the high-purity heat integrated distillation column.

scholarly journals Attitude Active Disturbance Rejection Control of the Quadrotor and Its Parameter Tuning

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Suiyuan Shen ◽  
Jinfa Xu
Keyword(s):  
Flight Control ◽  
Disturbance Rejection ◽  
Sliding Mode ◽  
Dynamic Performance ◽  
External Disturbance ◽  
Parameter Tuning ◽  
Adaptive Genetic Algorithm ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control ◽  
Better Than

The internal uncertainty and external disturbance of the quadrotor will have a significant impact on flight control. Therefore, to improve the control system’s dynamic performance and robustness, the attitude active disturbance rejection controller (ADRC) of the quadrotor is established. Simultaneously, an adaptive genetic algorithm-particle swarm optimization (AGA-PSO) is used to optimize the controller parameters to solve the problem that the controller parameters are difficult to tune. The performance of the proposed ADRC is compared with that of the sliding mode controller (SMC). The simulations revealed that the dynamic performance and robustness of the ADRC is better than that of the SMC.

scholarly journals A High-Precision Control Scheme Based on Active Disturbance Rejection Control for a Three-Axis Inertially Stabilized Platform for Aerial Remote Sensing Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Xiangyang Zhou ◽  
Chao Yang ◽  
Beilei Zhao ◽  
Libo Zhao ◽  
Zhuangsheng Zhu
Keyword(s):  
Disturbance Rejection ◽  
Precision Control ◽  
Sensing Applications ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control ◽  
Control Scheme ◽  
Remote Sensing Applications ◽  
Aerial Remote Sensing ◽  
Stabilized Platform ◽  
Inertially Stabilized Platform

This paper presents a high-precision control scheme based on active disturbance rejection control (ADRC) to improve the stabilization accuracy of an inertially stabilized platform (ISP) for aerial remote sensing applications. The ADRC controller is designed to suppress the effects of the disturbance on the stabilization accuracy that consists of a tracking differentiator, a nonlinear state error feedback, and an extended state observer. By the ADRC controller, the effects of both the internal uncertain dynamics and the external multisource disturbances on the system output are compensated as a total disturbance in real time. The disturbance rejection ability of the ADRC is analyzed by simulations. To verify the method, the experiments are conducted. The results show that compared with the conventional PID controller, the ADRC has excellent capability in disturbance rejection, by which the effect of main friction disturbance on the control system can be weakened seriously and the stabilization accuracy of the ISP is improved significantly.

A Self-Repairing Control Scheme for Quadrotor Helicopter via Active Disturbance Rejection Control

2013 ◽  
Vol 404 ◽  
pp. 603-608
Author(s):  
Qing Bo Wu ◽  
Fu Yang Chen ◽  
Chang Yun Wen
Keyword(s):  
Control System ◽  
Attitude Control ◽  
Disturbance Rejection ◽  
Control Algorithm ◽  
Tracking Error ◽  
Active Disturbance Rejection Control ◽  
Quadrotor Helicopter ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control ◽  
Control Scheme

In this paper, a self-repairing control scheme for attitude control of a quadrotor helicopter via active disturbance rejection control is proposed. Firstly, a model of the quadrotor helicopter is gained by its dynamic equations with pitch, roll and yaw axis. Then the active disturbance rejection controller is introduced, which is used to design the control system. The control system consists of PID controller in inner-loop and ADRC controller in outer-loop. Disturbances and uncertainties can be compensated by the ADRC to achieve smaller tracking error. Finally, the simulation results of the four-rotor helicopter validate the efficiency and self-repairing capability of the proposed control algorithm, compared with that of the PID control and the separate ADRC control.

scholarly journals Sliding Mode Robust Active Disturbance Rejection Control for Single-Link Flexible Arm with Large Payload Variations

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2995
Author(s):  
Fan Wang ◽  
Peng Liu ◽  
Feng Jing ◽  
Bo Liu ◽  
Wei Peng ◽  
...  
Keyword(s):  
Robust Control ◽  
Disturbance Rejection ◽  
Sliding Mode ◽  
Active Disturbance Rejection Control ◽  
Outer Loop ◽  
Active Disturbance Rejection ◽  
Flexible Arm ◽  
Disturbance Rejection Control ◽  
Control Scheme ◽  
Single Link

This paper proposes a novel robust control scheme for tip trajectory tracking of a lightweight flexible single-link arm. The developed control scheme deals with the influence of tip payload changes and disturbances during the working process of the flexible arm, thus realizing the accurate tracking for the tip reference trajectory. The robust control scheme is composed of an inner loop and an outer loop. The inner loop adopts the traditional PD control, and an active disturbance rejection control (ADRC) with a sliding mode (SM) compensation is designed in the outer loop. Moreover, the sliding mode compensation is mainly used to cope with the disturbance estimation error from the extended state observer (ESO), by which the insensitivity to tip payload variations and strong disturbance resistance is achieved. Finally, some numerical simulations are performed to support the theoretical analysis. The results show that the system is more robust to the tip mass variations of the arm and more resistant to the external torque after adding the sliding mode robustness term to the ADRC.

Sign in / Sign up

Export Citation Format

Share Document