scholarly journals Direct Torque and Suspension Force Control for Bearingless Induction Motors Based on Active Disturbance Rejection Control Scheme

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 86989-87001 ◽  
Author(s):  
Ke Li ◽  
Guoyu Cheng ◽  
Xiaodong Sun ◽  
Dean Zhao ◽  
Zebin Yang
Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 357 ◽  
Author(s):  
Chunlin Song ◽  
Changzhu Wei ◽  
Feng Yang ◽  
Naigang Cui

This article presents a fixed-time active disturbance rejection control approach for the attitude control problem of quadrotor unmanned aerial vehicle in the presence of dynamic wind, mass eccentricity and an actuator fault. The control scheme applies the feedback linearization technique and enhances the performance of the traditional active disturbance rejection control (ADRC) based on the fixed-time high-order sliding mode method. A switching-type uniformly convergent differentiator is used to improve the extended state observer for estimating and attenuating the lumped disturbance more accurately. A multivariable high-order sliding mode feedback law is derived to achieve fixed time convergence. The timely convergence of the designed extended state observer and the feedback law is proved theoretically. Mathematical simulations with detailed actuator models and real time experiments are performed to demonstrate the robustness and practicability of the proposed control scheme.


2020 ◽  
Vol 42 (12) ◽  
pp. 2221-2233 ◽  
Author(s):  
Yun Cheng ◽  
Zengqiang Chen ◽  
Mingwei Sun ◽  
Qinglin Sun

Although the heat integrated distillation is an energy-efficient and environment-friendly separation technology, it has not been commercialized. One of the reasons is that the nonlinear dynamics and the interactions between various control loops have limited the performance of the traditional control strategy. To achieve a high-purity product concentration, a dynamic decoupling control strategy based on active disturbance rejection control (ADRC) is proposed. The effects of interactions, uncertainties and external disturbances can be estimated and rejected by using extended state observer. Considering the constraints on manipulated variables, an optimized ADRC is designed for the first-order system. Moreover, a concentration observer based on a nonlinear wave model is formulated to reduce the number of sensors. In the simulation research, the related internal model control (IMC), multi-loop ADRC and model predictive control (MPC) are compared with the proposed control scheme. The simulation results demonstrate the advantages of the proposed control scheme on tight control, decoupling performance and disturbance rejection for the high-purity heat integrated distillation column.


2013 ◽  
Vol 404 ◽  
pp. 603-608
Author(s):  
Qing Bo Wu ◽  
Fu Yang Chen ◽  
Chang Yun Wen

In this paper, a self-repairing control scheme for attitude control of a quadrotor helicopter via active disturbance rejection control is proposed. Firstly, a model of the quadrotor helicopter is gained by its dynamic equations with pitch, roll and yaw axis. Then the active disturbance rejection controller is introduced, which is used to design the control system. The control system consists of PID controller in inner-loop and ADRC controller in outer-loop. Disturbances and uncertainties can be compensated by the ADRC to achieve smaller tracking error. Finally, the simulation results of the four-rotor helicopter validate the efficiency and self-repairing capability of the proposed control algorithm, compared with that of the PID control and the separate ADRC control.


Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2995
Author(s):  
Fan Wang ◽  
Peng Liu ◽  
Feng Jing ◽  
Bo Liu ◽  
Wei Peng ◽  
...  

This paper proposes a novel robust control scheme for tip trajectory tracking of a lightweight flexible single-link arm. The developed control scheme deals with the influence of tip payload changes and disturbances during the working process of the flexible arm, thus realizing the accurate tracking for the tip reference trajectory. The robust control scheme is composed of an inner loop and an outer loop. The inner loop adopts the traditional PD control, and an active disturbance rejection control (ADRC) with a sliding mode (SM) compensation is designed in the outer loop. Moreover, the sliding mode compensation is mainly used to cope with the disturbance estimation error from the extended state observer (ESO), by which the insensitivity to tip payload variations and strong disturbance resistance is achieved. Finally, some numerical simulations are performed to support the theoretical analysis. The results show that the system is more robust to the tip mass variations of the arm and more resistant to the external torque after adding the sliding mode robustness term to the ADRC.


2020 ◽  
Vol 10 (7) ◽  
pp. 2515 ◽  
Author(s):  
Wameedh Riyadh Abdul-Adheem ◽  
Ibraheem Kasim Ibraheem ◽  
Ahmad Taher Azar ◽  
Amjad J. Humaidi

A decentralized control scheme is developed in this paper based on an improved active disturbance rejection control (IADRC) for output tracking of square Multi-Input-Multi-Output (MIMO) nonlinear systems and compared with the decoupled control scheme. These nonlinear MIMO systems were subjected to exogenous disturbances and composed of high couplings between subsystems, input couplings, and uncertain elements. In the decentralized control scheme, it was assumed that the input couplings and subsystem couplings were both parts of the generalized disturbance. Moreover, the generalized disturbance included other components, such as exogenous disturbances and system uncertainties, and it was estimated within the context of Active Disturbance rejection Control (ADRC) via a novel nonlinear higher order extended state observer (NHOESO) from the measured output and canceled from the input channel in a real-time fashion. Then, based on the designed NHOESO, a separate feedback control law was developed for each subsystem to achieve accurate output tracking for given reference input. With the proposed decentralized control scheme, the square MIMO nonlinear system was converted into approximately separate linear time invariant Single-Input-Single-Output (SISO) subsystems. Numerical simulations in a MATLAB environment showed the effectiveness of the proposed technique, where it was applied on a hypothetical MIMO nonlinear system with strong couplings and vast uncertainties. The proposed decentralized control scheme reduced the total control signal energy by 20.8% as compared to the decoupled control scheme using Conventional ADRC (CADRC), while the reduction was 27.18% using the IADRC.


2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
John Cortés-Romero ◽  
Alberto Luviano-Juárez ◽  
Hebertt Sira-Ramírez

The problem of active disturbance rejection control of induction motors is tackled by means of a generalized PI observer based discrete-time control, using the delta operator approach as the methodology of analyzing the sampled time process. In this scheme, model uncertainties and external disturbances are included in a general additive disturbance input which is to be online estimated and subsequently rejected via the controller actions. The observer carries out the disturbance estimation, thus reducing the complexity of the controller design. The controller efficiency is tested via some experimental results, performing a trajectory tracking task under load variations.


Sign in / Sign up

Export Citation Format

Share Document