scholarly journals A Comparative Analysis of Tooth Size Discrepancy between Male and Female Subjects Presenting with a Class I Malocclusion

2018 ◽  
Vol 2018 ◽  
pp. 1-6
Author(s):  
Eva Man Yee Leung ◽  
Yanqi Yang ◽  
Balvinder Khambay ◽  
Ricky Wing Kit Wong ◽  
Colman McGrath ◽  
...  
Keyword(s):  
Class I ◽  
Tooth Size ◽  
Male And Female ◽  
Mean Values ◽  
Southern Chinese ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Males And Females ◽  
The Mean ◽  
Female Subjects

Objectives. To evaluate the tooth size discrepancy and Bolton’s ratios between male and female subjects with a Class I malocclusion. Materials and Methods. The digital e-models of 100 male and 100 female 12-year-old southern Chinese children with a Class I malocclusion were selected. The mesiodistal widths from permanent first molar to the contralateral side first molar of the upper and lower dentitions were measured. Differences between the tooth size discrepancy, together with the anterior and overall Bolton’s ratios between male and female subjects, were assessed using a two-sample t-test. A paired t-test was used to determine differences between antimetric pairs of teeth within the same arch. Results. Females had statistically significant smaller teeth than males (P < 0.05) except the upper left and lower left lateral incisor and lower left and right central incisors. The mean values of anterior Bolton’s ratios for males and females were 77.04 and 77.03, respectively (P > 0.05), while the mean values of overall Bolton’s ratios of male and female are 90.48 and 90.65, respectively (P < 0.05). The clinical significant differences (Cohen’s d > 0.2) for contralateral tooth size were shown on the maxillary canines, lateral incisors, and central incisors of males; and mandibular canines and lateral incisors of females. Conclusions. Southern Chinese females presenting with Class I malocclusions have smaller mesiodistal tooth dimensions compared to males. Both males and females presented several tooth size asymmetries. There are no statistical differences in anterior and overall Bolton’s ratios between the genders.

scholarly journals Overall and Anterior Tooth Size Ratios in a Group of Emiratis

2018 ◽  
Vol 12 (1) ◽  
pp. 655-663 ◽  
Author(s):  
Moaza Ghuloom Mohammad ◽  
Shazia Naser-ud Din ◽  
Amar Hassan Khamis ◽  
Athanasios E. Athanasiou
Keyword(s):  
Class Ii ◽  
Anterior Tooth ◽  
Class I ◽  
Tooth Size ◽  
Class Iii ◽  
Mean Values ◽  
Normal Occlusion ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Dental Casts

Objectives:The aims of this investigation in a group of Emiratis were (1) To study overall and anterior tooth size ratios in Class I normal occlusion, (2) To estimate overall and anterior tooth size ratios in different malocclusion groups, (3) To compare overall and anterior tooth size ratios in Class I normal occlusion with the Bolton standards, and (4) To determine the distribution of overall and anterior tooth size ratios ± 2 SD from Bolton mean values in all occlusion groups.Materials and Methods:In this cross-sectional investigation, consecutive patients’ files, including dental casts, were selected from the archives of orthodontic clinics of the Dubai Health Authority. The final sample was formed following the application of specific inclusion criteria. The sample consisted of 521 pairs of dental casts representing both sexes (males: 188; females: 333) and different malocclusion groups (Class I: 288; Class II: 110; Class III: 30) and Class I normal occlusion (93). The mean age of patients was 16.18y for Class I, 15.73y for Class II, 15.83y for Class III, and 16.55y for Class I normal occlusion. The dental casts were scanned and digitized by the first author using the Ortho Insight 3D laser scanner. Measurements were made regarding maxillary and mandibular sums of mesiodistal tooth dimension of the overall (6-6) and anterior (3-3) groups of teeth. Statistical analysis included descriptive statistics, pairedt-test and Analysis of Variance (ANOVA). The level of significance was set atp<0.05.Results:There were statistically significant differences among malocclusion groups with regard to overall and anterior tooth size ratios. However, the comparison between the Class I normal occlusion group and the Bolton standards showed no statistically significant differences. Only five cases in Class II malocclusion presented an anterior tooth size discrepancy outside plus 2 SD from Bolton mean values and one case in Class I malocclusion presented with an overall tooth size discrepancy outside plus 2 SD from Bolton mean values.Conclusion:This study of the different occlusion groups of the Emirati sample concluded that (a) Class I normal occlusion cases presented similar overall and anterior tooth size ratios to Bolton standards; (b) Overall and anterior tooth size ratios among different malocclusion groups exhibited statistically significant differences; (c) Five cases in Class II malocclusion presented an anterior tooth size discrepancy outside plus 2 SD from Bolton mean values, and (d) One case in Class I malocclusion presented an overall tooth size discrepancy outside plus 2 SD from Bolton mean values.

scholarly journals Effect of Bi-jaw Premolar Extractions on Tooth Size Discrepancy in an Indian Population having Class I Malocclusion: An in vitro Study

2017 ◽  
Vol 7 (2) ◽  
pp. 114-117
Author(s):  
Manish Sonawane ◽  
Ravindranath V Krishnan ◽  
Girish R Karandikar ◽  
Samay Tahilramani
Keyword(s):  
Indian Population ◽  
In Vitro Study ◽  
Class I ◽  
Tooth Size ◽  
Premolar Extraction ◽  
Indian Origin ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Overall Ratio

ABSTRACT Aim To evaluate the effect of bi-jaw premolar extractions on Bolton tooth size discrepancy in patients of Indian origin, all of which exhibited a bilateral Angle’s class I molar relationship. Materials and methods Ninety sets of pretreatment study casts, which constituted the sample for the study, were divided into three groups, namely, Bolton small (BS), Bolton normal (BN), and Bolton big (BB). Simulated bi-jaw extraction of premolars was carried out in four different combinations for each set of study cast. The four values of Bolton’s overall ratio (BOR) thus obtained were compared with the original BOR value. Results The BOR value reduced when subjected to any of the four combinations of bi-jaw premolar extractions. Conclusion Premolar extraction in any combination inevitably changes the BOR value, which potentially affects the settling of occlusion toward the finishing stages of orthodontic treatment. Clinical significance The present study provides an insight into the choice of bi-jaw premolar extraction combination for each of the three groups in patients exhibiting class I malocclusion in the Indian population. How to cite this article Tahilramani S, Karandikar GR, Krishnan RV, Sonawane M. Effect of Bi-jaw Premolar Extractions on Tooth Size Discrepancy in an Indian Population having Class I Malocclusion: An in vitro Study. J Contemp Dent 2017;7(2):114-117.

scholarly journals Determination of Bolton Norms for Indian Population Sample

2017 ◽  
Vol 7 (1) ◽  
pp. 33-36 ◽  
Author(s):  
TV Pawan Kumar ◽  
Prasad Chitra
Keyword(s):  
Population Sample ◽  
Tooth Size ◽  
Mean Values ◽  
Class 1 ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Anterior Ratio ◽  
Overall Ratio ◽  
Male Subjects

Introduction: Tooth size discrepancy varies between different ethnic groups and races. Bolton’s tooth size norms were originally determined in Caucasian population.Objective: To determine tooth size ratios for maxillary and mandibular dentition in Telangana population of Indian sample and to compare the ratios with standard Bolton norms.Materials & Method: The study sample comprised of 300 subjects (150 males and 150 females) aged between 14-25 years having Angle’s Class 1 molar relationship. Study models of all subjects were prepared and mesiodistal dimensions were measured to determine mean Bolton’s anterior ratio, overall ratio, over jet and overbite.Result: Evidence of sexual dimorphism was observed with Indian male subjects having greater mean values than the females. The determined mean for anterior tooth ratio was 80.88 ± 3.03%, overall tooth ratio 93.99 ± 3.11%, overjet 2.92 ± 0.62mm and overbite 2.96 ± 0.63mm. Statistically significant differences were found between Indian samples and Bolton Caucasian standards.Conclusion: The study provides evidence that tooth sizes are population specific. Mean values specific to particular population groups should be derived in order to make treatment planning more accurate and predictable.

scholarly journals Comparison of White and Chinese perception of esthetic Chinese lip position

2013 ◽  
Vol 84 (2) ◽  
pp. 246-253 ◽  
Author(s):  
Hui Theng Chong ◽  
Kim Wei Thea ◽  
Joseph Descallar ◽  
Yong Chen ◽  
Oyku Dalci ◽  
...  
Keyword(s):  
Adult Male ◽  
Mean Value ◽  
Class I ◽  
Lower Lip ◽  
Male And Female ◽  
Mean Values ◽  
Skeletal Class ◽  
Chinese Adult ◽  
The Mean ◽  
Additional Image

ABSTRACT Objective: To compare the esthetic preference of White and Chinese judges with regard to Chinese lip position. Materials and Methods: The profile images of a dental and skeletal Class I Chinese adult male and female were digitally adjusted to Chinese mean values. The lip profile was adjusted with the upper and lower lip at the mean distance from the Ricketts' E-line. These images were used as baseline images and were further digitally manipulated to generate six additional images with the upper and lower lip such that they lay 0.5, 1.0, and 2.0 standard deviations (SDs) in front of or behind the E-line. An additional image was modified based on a White mean value. The images were viewed and ranked by 251 White and Chinese judges (dentists and laypersons) in Australia and China. Results: Significantly more Chinese judges ranked the retrusive profiles higher than the White judges. The White judges also ranked the profile image adjusted to −0.5 SD as the most esthetic for both the female and male, while the Chinese judges ranked the −1.0 SD profile as the most esthetic. Conclusions: The ethnicity of the judges is a significant factor influencing the perception of esthetic lip position. The Chinese judges prefer a more retrusive profile and are more likely to rate a protrusive profile as unacceptable, compared with the White judges.

A study on comparison of bleeding time and clotting time in young adult male and female subjects

2021 ◽  
Vol 18 (3) ◽  
pp. 05-09
Author(s):  
Ayesha Anjum ◽  
Keyword(s):  
Young Adult ◽  
Adult Male ◽  
Bleeding Time ◽  
P Value ◽  
Clotting Time ◽  
Male And Female ◽  
Young Adult Male ◽  
Males And Females ◽  
The Mean ◽  
Female Subjects

Background: Bleeding time is a laboratory test to assess the platelet function. It is dependent on various factors like function of platelets and pathway of coagulation. Clotting time is the time required for a sample of blood to clot in vitro under standard conditions. It is known from previous studies that there is a difference in the bleeding time and clotting time among males and females. The exact reasons for such differences have been postulated, but are insufficient. Therefore the aim of this study is to study and compare the gender differences in bleeding time and clotting time in young male and female subjects. Aims and objectives: The aim of this study is to determine and compare the differences in bleeding time and clotting time in young adult male and female subjects. Materials and Methods: This study was done in the Department of Physiology, Raichur Institute of Medical Sciences, Raichur. Sixty medical students studying in first year M.B.B.S, were selected for the study, out of which thirty were males, and thirty were females. Bleeding time was determined by Duke’s method and Clotting time was determined by Wrights Capillary tube method. Data was analysed using SPSS software. Unpaired ‘t’ test was used for comparing the values. p value less than 0.05 was considered significant. Result: The mean value of bleeding time in males was found to be,127.69±51,02 and in females it was 133.28±44.30. The mean of the CT in males was 212.18±60 and in females it was found to be 257.16±61.00.The mean BT and CT was significantly higher in females as compared to the males. Conclusion: It was found that there are differences in bleeding time and time in males and females, BT and CT were statistically more in females as compared to females.

scholarly journals Odontometric Analysis of Permanent Mandibular Canine to Determine Sexual Dimorphism: A Preliminary Study

2018 ◽  
Vol 1 (2) ◽  
pp. 80-85
Author(s):  
Mangesh Bajracharya ◽  
B.K. Omar ◽  
S.K. Maharjan
Keyword(s):  
Statistical Analysis ◽  
Sexual Dimorphism ◽  
Male And Female ◽  
Mean Values ◽  
Medical College ◽  
The Mean ◽  
Preliminary Study ◽  
Mandibular Canine ◽  
Level Of Significance ◽  
Female Subjects

Introduction: Crown diameters of a teeth are reasonably accurate predictors of sex and are good adjuncts for sex determinations. The aim of the study was to determine the reliability of mesiodistal width of mandibular canine in sexual dimorphism. Materials and methods: Medical students of Nepalgunj Medical College, Chisapani, Banke, Nepal were selected for data collection. Sample consisted of 300 subjects which included 150 males and 150 females of age group 18-25 years. The mesiodistal width of the mandibular right and left canine teeth were recorded by Vernier calliper. Descriptive statistical analysis was done from odontometric measurements data to calculate sexual dimorphism for mandibular right and left canine. The student t-test was used to determine the level of significance among the parameters measured. Results: The mean values for mesiodistal width of mandibular right canine for male and female subjects were 7.1665±0.28576 and 6.3777±0.37875 respectively. The sexual dimorphism for mandibular right canine was calculated to be 12.368%. The mean values for mesiodistal width of mandibular left canine for male and female subjects were 7.3875±0.35506 and 6.2847±0.41115 respectively. The sexual dimorphism for mandibular left canine was calculated to be 17.5%. Conclusion: Statistical analysis showed significant sexual dimorphism in odontometric analysis of permanent mandibular canines between male and female with the mandibular left canine showing the highest percentage.

scholarly journals The Effect of Premolar Extraction on Tooth Size Discrepancies of the Patients Treated in Orthodontic Department at BSMMU

2018 ◽  
pp. 13-16
Author(s):  
Nabila Anwar ◽  
Gazi Shamim Hasan
Keyword(s):  
Treatment Plan ◽  
Cross Sectional Study ◽  
Class I ◽  
Tooth Size ◽  
Cross Sectional ◽  
Premolar Extraction ◽  
Before And After ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Overall Ratio

Aims: The present cross sectional study was carried out to investigate the effect of first premolar extraction on tooth size discrepancies (TSD) in an orthodontic population seeking treatment at orthodontic department, BSMMU.Material and methods: Mesiodistal tooth widths were measured on 50 pair of pretreatment and post treatment dental casts of subjects with Class I variation – Class I with bimaxillary proclination, and Class I crowding. The overall ratios and tooth-size discrepancies were determined before and after 1st premolar extractions. Before and after extractions, the subjects were divided into Bolton small (BS), Bolton normal (BN) and Bolton large (BL) overall ratio groups categorized by the Bolton standard deviation definition.Results: The Bolton overall ratio after 1st premolar extraction was smaller than those before extraction in each group. Some of the patients in the BN group and BB group were moved into the BS group and BN group respectively after 1st premolar extraction. A tooth size discrepancy occurred in some patients with normal overall ratios  after premolar extractions, but a tooth size discrepancy might be corrected in some patients with big overall ratios  after premolar extraction.Conclusion: Orthodontists should take into account the following when devising a treatment plan for premolar extractions, overall ratios might decrease and remain normal, and clinically significant tooth-size discrepancies could change mutually after extractions.Ban J Orthod & Dentofac Orthop, April 2015; Vol-5 (1-2), P.13-16

scholarly journals Comparison of Effects of Tooth Extraction and Air-rotor Stripping Therapy on Tooth-size Discrepancy in Class I Borderline Patients

2014 ◽  
Vol 3 (1) ◽  
pp. 8-13
Author(s):  
Demet Kaya ◽  
Tülin Taner ◽  
Derya Germeç-Çakan
Keyword(s):  
Tooth Extraction ◽  
T Test ◽  
Class I ◽  
Tooth Size ◽  
Significant Difference ◽  
Size Discrepancy ◽  
Borderline Patients ◽  
Dental Models ◽  
Tooth Size Discrepancy ◽  
Overall Ratio

ABSTRACT Aim The objectives of this study were to investigate the effects of tooth extraction and air-rotor stripping therapy on tooth-size discrepancy, and to compare the changes between two groups. Materials and methods The sample comprised the preand post-treatment dental models of 20 postadolescent class I borderline patients. First group was composed of dental models of 10 patients (mean age of 17.1 ± 2.5 years) treated with four first premolars extraction. Second group included dental models of 10 patients (mean age of 18.8 ± 2.7 years) treated with air-rotor stripping. Treatment effects on Bolton overall and anterior ratios/values were analyzed by paired sample t-test and independent sample t-test was used for intergroup comparisons. Results The change in Bolton overall ratio was found statistically significant for the extraction and insignificant for the air-rotor stripping group. A statistically significant decrease was observed in Bolton anterior ratio for the air-rotor stripping group. Neither four premolars extraction nor air-rotor stripping therapy created statistically significant changes in Bolton overall/anterior values. The changes in Bolton overall ratio/value did not show a statistically significant difference between the groups. Conclusion This study showed that tooth extraction or air-rotor stripping therapy did not have an unfavorable effect on toothsize discrepancy in class I borderline patients. How to cite this article Kaya D, Taner T, Germeç-Çakan D. Comparison of Effects of Tooth Extraction and Air-rotor Stripping Therapy on Tooth-size Discrepancy in Class I Borderline Patients. Int J Experiment Dent Sci 2014;3(1):8-13.

scholarly journals Tooth extractions in Orthodontics: first or second premolars?

2019 ◽  
Vol 24 (3) ◽  
pp. 88-98 ◽  
Author(s):  
Telma Martins de Araújo ◽  
Luciana Duarte Caldas
Keyword(s):  
Class I ◽  
Skeletal Maturation ◽  
Tooth Size ◽  
Facial Profile ◽  
Anterior Crowding ◽  
Patient Cooperation ◽  
Size Discrepancy ◽  
Tooth Size Discrepancy ◽  
Bimaxillary Protrusion ◽  
Tooth Extractions

ABSTRACT Tooth crowding and protrusions demand rigorous attention during orthodontic planning that includes the extraction of first and second premolars. Some characteristics, such as dentoalveolar bone discrepancies, maxillomandibular relations, facial profile, skeletal maturation, dental asymmetries and patient cooperation, are important elements of an orthodontic diagnosis. This study discusses the options of treatments with extractions and describes the correction of a Class I malocclusion, bimaxillary protrusion, severe anterior crowding in both dental arches and tooth-size discrepancy, using first premolar extractions.

scholarly journals Inner Canthal Distance, Inter Pupillary Width, and Golden Proportion, as Predictors of Width of the Maxillary Central Incisors - An In Vivo Study

2021 ◽  
Vol 10 (22) ◽  
pp. 1650-1655
Author(s):  
Sanath Kumar Shetty ◽  
Prakyath Malli ◽  
Joana D’ Souza ◽  
Kamalakanth Shenoy ◽  
Surya Teja Chunduri ◽  
...  
Keyword(s):  
In Vivo Study ◽  
Central Incisor ◽  
Male And Female ◽  
Golden Proportion ◽  
Maxillary Central Incisor ◽  
Anterior Teeth ◽  
Males And Females ◽  
The Mean ◽  
Female Subjects

BACKGROUND The mesio-distal width of anterior teeth can be determined by certain anthropometric measurements of face. The inter pupillary width is a facial landmark that is stable and does not modify after the age of 14 years. This study intended to determine if any relationship exists between inner canthal distances (ICD), inter-pupillary width (IPW), and golden proportion in determining the association between them and the maxillary central incisor width (CIW). METHODS 252 adult dentate subjects of age group 18 - 26 years who were free from dentofacial deformities were evaluated in the present in vivo study. The mesiodistal measurement of each maxillary central incisor, inner canthal distance (ICD), interpupillary width (IPW) was measured. The inner canthal distance of each subject was multiplied by a decreasing function of the geometric progression value (0.618) to provide the total width of two central incisors. The product was divided by 2 to get the width of a maxillary central incisor. A 't' test was used to establish significant differences if any in the mesiodistal width of the maxillary central incisors (CIW), inner canthal distance (ICD), and inter-pupillary width (IPW). Concurrence between the measured and calculated central incisor widths was evaluated using Pearson's correlation coefficients. RESULTS The mean ICD of male and female subjects was 33.03 ± 3.037 mm and 30.75 ± 2.89 mm, respectively. The mean IPW of male and female subjects was 62.26 ± 2.99 mm and 58.46 ± 2.73 mm, respectively. The mean CIW of male and female subjects was 19.98 ± 1.96 mm and 18.54 ± 1.87 mm, respectively. A high correlation was found between the measured and calculated width of central incisors (r=0.954 and r=0.974 in males and females). CONCLUSIONS There is a high positive correlation between ICD and CIW and it exists in the golden proportion. On the other hand, it was seen that the IPW and CIW were not in golden proportion. The mean of calculated CIW was significantly higher compared to the measured CIW in both males and females. ICD was seen as a significant factor in determining the CIW in males and females. All the facial and dental measurements were greater for men than for women; however, no significant differences were found between sexes with respect to ICD. KEY WORDS Inner Canthal Distance (ICD), Inter Pupillary Width (IPW), Central Incisor Width (CIW), Golden Proportion

Sign in / Sign up

Export Citation Format

Share Document