scholarly journals The Influence of Incident Power on the Magnetic Fluid Sensor Sensitivity Based on Optical Transmission Properties

2018 ◽  
Vol 2018 ◽  
pp. 1-5 ◽  
Author(s):  
Yongqian Li ◽  
Hao Zhang ◽  
Zhi Yang ◽  
Baoyi Yuan ◽  
Ze Yuan ◽  
...  

Sensitivity is a critical characteristic of sensors, and increasing the sensitivity of the sensor is valuable for measurement study. Incident power has an important influence on the sensitivity of magnetic fluid sensors based on optical transmission properties. Variation in the magnetic field sensitivity at different incident powers was investigated by the measurement of transmitted power through the magnetic fluid sensors. As the magnetic field strength increases, the sensitivity variation of the magnetic fluid film sensor can be divided into four stages: first decreasing sharply, secondly increasing, then decreasing gradually, and finally tending toward a small stable value. The magnitudes of the change in the sensor sensitivity are influenced by the incident power, because the structural pattern of the nano-magnetic particles in the magnetic fluid sensor changes, the Soret effect and the Photonic Hall effect co-define the sensing system. In the weak magnetic field range, when a higher sensitivity is required, it is appropriate to select a larger incident power; however, in a large magnetic field range, when a higher sensitivity is required, a small incident power should be selected. Therefore, the magnetic fluid film sensor exhibits different sensitivity characteristics if different incident power values are chosen. The appropriate incident power can be selected according to the range of the magnetic field to be measured to improve the sensitivity in the magnetic field measurement study.

Optik ◽  
2018 ◽  
Vol 172 ◽  
pp. 730-735 ◽  
Author(s):  
Yongqian Li ◽  
Hao Zhang ◽  
Zhi Yang ◽  
Baoyi Yuan ◽  
Ze Yuan ◽  
...  

1992 ◽  
Vol 06 (03) ◽  
pp. 161-169 ◽  
Author(s):  
K.I. KUGEL ◽  
T. YU. LISOVSKAYA ◽  
R.G. MINTS

We study the dependence of critical current j c on magnetic field H in superconducting polycrystals which are considered as systems of superconducting crystallites (isotropic or anisotropic) with Josephson contacts between them. Isotropy or anisotropy of contacts depends on the orientation of their crystallographic axes relatively to edges of contact planes. It is shown that for a system of randomly oriented isotropic contacts, the dependence j c (H) in a relatively wide field range has the asymptotic form j c ~( ln H)/H2. This differs drastically from j c (H) for single contacts. Anisotropy effects due to large differences in London penetration depth λ values corresponding to external magnetic field directed along different axes are analyzed in detail. It is shown that for uniaxal crystals with λ1=λ2≪λ3, this anisotropy leads to the relation [Formula: see text] for chaotic orientation of crystallites. The form of j c (H) curves for two different orientations of the magnetic field relatively to the transport current through the sample is found.


2018 ◽  
Vol 787 ◽  
pp. 75-80
Author(s):  
Xiao Fei Wang ◽  
Ji Min Li

This paper presents a spin modulated atomic magnetometer, different from other kinds of atomic magnetometers, the conversion coefficient between the polarization signal and the magnetic field to be measured is independent of the transverse relaxation time, which means that the higher sensitivity can be achieved when polarization is kept constant. For better understanding, the magnetic noise of spin modulated magnetometer is demonstrated and compared to SERF magnetometer. The magnetic noise measurement experiment is designed, the experimental results are consistent with the theoretical prediction. This paper validate the unique property of spin modulated magnetometer and this property will play an important role in guiding the optimization of future experiments.


Author(s):  
Kenichi Kamioka ◽  
Ryuichiro Yamane

The experiments are conducted on the magnetic fluid flow induced by the multi-pole rotating magnetic field in a circular cylinder. The numbers of poles are two, four, six, eight and twelve. The applied electric current and frequency are 2∼6 A and 20∼60 Hz, respectively. The peak velocity of the flow increases with the increase in the strength and the phase velocity of the magnetic field. As the increase in the number of poles, the flow shifts to the outer periphery.


2012 ◽  
Vol 503 ◽  
pp. 3-7
Author(s):  
Meng Zhao ◽  
Ji Bin Zou ◽  
Jing Shang

According to researching the spin traveling wave pump, the relationship of the characteristics of magnetic fluid and the press is investigated under the spin magnetic field by the theory method. The relationship of moving, magnetic field and press is investigated by the decoupled computation between the magnetic field and force. The method is scientificity and rationality by the testing. The distributing shape of magnetic fluid in the pump is affected by the adding magnetic field under the spin magnetic field when the magnetic fluid is filled in the pump. At the same time, the adding magnetic field is affected by magnetic particles of magnetic fluid. The magnetic fluid can be moved by the effect of the adding magnetic field in the pump. The flux of magnetic fluid increases with the magnetic field.


2011 ◽  
Vol 197-198 ◽  
pp. 314-317 ◽  
Author(s):  
Fei Fei Xing ◽  
De Cai Li ◽  
Wen Ming Yang ◽  
Xiao Long Yang

Based on the theoretical model, magnetic field distribution of rectangular teeth, two-sides dilated shape and one-side dilated shape teeth structure with common other conditions were calculated using finite element method when the sealing gap was 0.1mm and 0.12mm. The comparison of their results with the same sealing gap showed that rectangular teeth structure had the highest magnetic leakage. Moreover, the magnetic field distribution of sealing structures with rectangular stages on both the shaft and pole pieces under the same design and sealing gap were also calculated using the same method, whose result was compared with rectangular stages on pole pieces only. The comparison showed that the former did not have higher pressure capability obviously but led to higher magnetic leakage.


2009 ◽  
Vol 132 (1) ◽  
Author(s):  
E. E. Tzirtzilakis ◽  
N. G. Kafoussias

The three-dimensional laminar and steady boundary layer flow of an electrically nonconducting and incompressible magnetic fluid, with low Curie temperature and moderate saturation magnetization, over an elastic stretching sheet, is numerically studied. The fluid is subject to the magnetic field generated by an infinitely long, straight wire, carrying an electric current. The magnetic fluid far from the surface is at rest and at temperature greater of that of the sheet. It is also assumed that the magnetization of the fluid varies with the magnetic field strength H and the temperature T. The numerical solution of the coupled and nonlinear system of ordinary differential equations, resulting after the introduction of appropriate nondimensional variables, with its boundary conditions, describing the problem under consideration, is obtained by an efficient numerical technique based on the common finite difference method. Numerical calculations are carried out for the case of a representative water-based magnetic fluid and for specific values of the dimensionless parameters entering into the problem, and the obtained results are presented graphically for these values of the parameters. The analysis of these results showed that there is an interaction between the motions of the fluid, which are induced by the stretching surface and by the action of the magnetic field, and the flow field is noticeably affected by the variations in the magnetic interaction parameter β. The important results of the present analysis are summarized in Sec. 6.


Sign in / Sign up

Export Citation Format

Share Document