scholarly journals Recent Advances in Characterization Techniques for the Interface in Carbon Nanotube-Reinforced Polymer Nanocomposites

2019 ◽  
Vol 2019 ◽  
pp. 1-24 ◽  
Author(s):  
Junjie Chen ◽  
Xuhui Gao ◽  
Deguang Xu
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Mechanical And Thermal Properties ◽  
Characterization Techniques ◽  
Current State ◽  
Reinforced Polymer ◽  
Emerging Trends ◽  
Functionalization Of Carbon Nanotubes ◽  
Physical And Chemical

The current state of characterization techniques for the interface in carbon nanotube-reinforced polymer nanocomposites is reviewed. Different types of interfaces that exist within the nanocomposites are summarized, and current efforts focused on understanding the interfacial properties and interactions are reviewed. The emerging trends in characterization techniques and methodologies for the interface are presented, and their strengths and limitations are summarized. The intrinsic mechanism of the interactions at the interface between the carbon nanotubes and the polymer matrix is discussed. Special attention is given to research efforts focused on chemical functionalization of carbon nanotubes. The benefits and disadvantages associated with covalent and noncovalent functionalization methods are evaluated, respectively. Various techniques used to characterize the properties of the interface are extensively reviewed. How the mechanical and thermal properties of the nanocomposites depend on the physical and chemical nature of the interface is also discussed. Better understanding and design of the interface at the atomic level could become the forefront of research in the polymer community. Potential problems going to be solved are finally highlighted.

A new micromechanics approach for predicting the elastic response of polymer nanocomposites reinforced with randomly oriented and distributed wavy carbon nanotubes

2017 ◽  
Vol 51 (20) ◽  
pp. 2899-2912 ◽  
Author(s):  
MK Hassanzadeh-Aghdam ◽  
R Ansari ◽  
A Darvizeh
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Random Distribution ◽  
Volume Fraction ◽  
Unit Cell ◽  
Elastic Behavior ◽  
Random Orientation ◽  
Reinforced Polymer ◽  
The Matrix

A comprehensive investigation is carried out into the elastic behavior of carbon nanotube-reinforced polymer nanocomposites using two combined analytical micromechanical methods. A unit cell-based micromechanical method is developed to model the random distribution of carbon nanotubes within the polymer matrix. Also, the Eshelby method is used for modeling the random orientation state of carbon nanotubes within the matrix. Two fundamental aspects affecting the mechanical behavior of carbon nanotube/polymer nanocomposites, including the carbon nanotube waviness and the interphase formed due to the non-boned interaction between the carbon nanotube and the surrounding polymer, are considered in the unit cell method. Comparisons between the results of present method and experimental data reveal that for more realistic predictions, five important factors including, random orientation and random distribution of carbon nanotubes, interphase, waviness and transversely isotropic behavior of carbon nanotube should be considered in the modeling of carbon nanotube-reinforced polymer nanocomposites. The effects of volume fraction, number of waves and waviness factor of carbon nanotube as well as the type of random distribution of CNTs within the matrix on the elastic modulus of the polymer nanocomposites are studied.

A Carbon Nanotubes Aggregation in Polymer Nanocomposites

2018 ◽  
Vol 935 ◽  
pp. 55-60 ◽  
Author(s):  
Louise B. Atlukhanova ◽  
George V. Kozlov
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Packing Density ◽  
Elasticity Modulus ◽  
Aggregation Process ◽  
Walk Dimension

Carbon nanotubes aggregation process in aggregates (bundles) has been studied. This process results in essential reduction of nanocomposites attainable elasticity modulus. The bundles packing density is defined by aggregation expectation time and corresponding carbon nanotube walk dimension up to sticking with a similar nanotube.

Modeling the interphase region in carbon nanotube‐reinforced polymer nanocomposites

2018 ◽  
Vol 40 (S2) ◽  
pp. E1219-E1234 ◽  
Author(s):  
Jafar Amraei ◽  
Jafar E. Jam ◽  
Behrouz Arab ◽  
Roohollah D. Firouz‐Abadi
Keyword(s):  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Interphase Region ◽  
Reinforced Polymer

A closed-form model for estimating the effective thermal conductivities of carbon nanotube–polymer nanocomposites

2018 ◽  
Vol 233 (8) ◽  
pp. 2909-2919 ◽  
Author(s):  
Reza Moheimani ◽  
M Hasansade
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Closed Form ◽  
Polymer Nanocomposites ◽  
Micromechanical Model ◽  
Polymer Nanocomposite ◽  
Interfacial Thermal Resistance ◽  
Full Potential ◽  
Thermal Conductivities

This paper describes a closed-form unit cell micromechanical model for estimating the effective thermal conductivities of unidirectional carbon nanotube reinforced polymer nanocomposites. The model incorporates the typically observed misalignment and curvature of carbon nanotubes into the polymer nanocomposites. Also, the interfacial thermal resistance between the carbon nanotube and the polymer matrix is considered in the nanocomposite simulation. The micromechanics model is seen to produce reasonable agreement with available experimental data for the effective thermal conductivities of polymer nanocomposites reinforced with different carbon nanotube volume fractions. The results indicate that the thermal conductivities are strongly dependent on the waviness wherein, even a slight change in the carbon nanotube curvature can induce a prominent change in the polymer nanocomposite thermal conducting behavior. In general, the carbon nanotube curvature improves the nanocomposite thermal conductivity in the transverse direction. However, using the straight carbon nanotubes leads to maximum levels of axial thermal conductivities. With the increase in carbon nanotube diameter, an enhancement in nanocomposite transverse thermal conductivity is observed. Also, the results of micromechanical simulation show that it is necessary to form a perfectly bonded interface if the full potential of carbon nanotube reinforcement is to be realized.

Future trends in carbon nanotubes: Process towards a viable biomedical solution

2021 ◽  
Vol 06 ◽  
Author(s):  
Raja Murugesan ◽  
Sureshkumar Raman ◽  
Arun Radhakrishnan
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Biomedical Applications ◽  
Scale Up ◽  
Diagnostic Techniques ◽  
Nano Composite ◽  
Methods Of Synthesis ◽  
In Trans ◽  
Functionalization Of Carbon Nanotubes

Background: Recently, Nanomaterials based nano-composite materials play the role of various field. Especially, Carbon nanotube based materials are involved in the bio-medical applications.Since, their exclusive and exciting property, researchers worldwide have extensively involved in trans-modulating the carbon nanotubes into a viable medico-friendly system. Objective: These active researches paved the path towards targeted drug delivery, diagnostic techniques, and bio-analytical applications. Despite these exciting properties, which accomplish the probable for biomedical applications, they hold Biosafety issues. Methods: This broad-spectrum review has discussed different aspects of carbon nanotubes and carbon nanotube-based systems related to biomedical applications. Results: Adding to this, a short chronological description of these tiny yet powerful particles given, followed by a discussion regarding their types, properties, methods of synthesis, scale-up, purification techniques and characterization aspects of carbon nanotubes. Conclusion: In the later part, the functionalization of carbon nanotubes was reviewed in detail, which is important to make them biocompatible and stable in biological systems and render them a great property of loading various biomolecules diagnostic and therapeutic moieties. Lastly, an inclusive description of the potential biomedical applications has been given followed by insights into the future.

Carbon Nanotube Composites

2019 ◽  
Vol 23 ◽  
pp. 75-81
Author(s):  
Ponnusamy Senthil Kumar ◽  
G. Janet Joshiba
Keyword(s):  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Carbon Nanotube ◽  
Chemical Properties ◽  
Market Demand ◽  
Size Dependent ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Physical And Chemical ◽  
And Chemical Properties

The discovery of carbon nanotubes is one of the remarkable achievement in the field of material science and it is a great advancement of Nanotechnology. A carbon nanotube is an expedient material used in several domains and paves way for the welfare of humans in many ways. Carbon nanotubes are nanosized tubes made from graphitic carbons and it is well known for its exclusive physical and chemical properties. The market demand for the nanotubes has increased progressively due to its size dependent, structure and mechanical properties. The carbon nanotubes possess high tensile strength and it is also found to be the durable fibre ever known. It is also found to possess exceptional electrical properties. The carbon nanotube composites have an excellent young’s modulus and higher tensile strength same as graphite carbon. This review plots the properties of carbon nanotubes and portrays the planning and properties of carbon nanotube composites. The wide application of carbon nanotube composites is also explained.

Sign in / Sign up

Export Citation Format

Share Document