scholarly journals The Feasibility Assessment Study of Bridge Crack Width Recognition in Images Based on Special Inspection UAV

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Xiong Peng ◽  
Xingu Zhong ◽  
Chao Zhao ◽  
Y. Frank Chen ◽  
Tianyu Zhang
Keyword(s):  
Crack Width ◽  
Support Vector ◽  
Recognition Method ◽  
Bridge Inspection ◽  
Xiangjiang River ◽  
Important Indicator ◽  
Feasibility Assessment ◽  
Bridge Safety ◽  
The Cost

Bridge defects are important indicator for the bridge safety assessment. Considering the cost and inefficiency of the traditional method, the UAV system applied for bridge crack inspection is a better choice. Therefore, we have configured a bridge inspection UAV system with SLR camera, laser rangefinder. First, we have carried an evaluation experiment to determine the distance range of stable imaging for planning the safer bridge inspection route based on the special UAV system. Then, the crack recognition method combining neural network and support vector machine is used to locate and extract the bridge cracks, and then, the actual cracks are calculated according to the optical principle. Finally, a case study of the Xiangjiang-River bridge inspection is carried out to verify the feasibility of bridge defects recognition based on this UAV system, achieving above 90% in the crack width recognition, which provides a better platform for bridge inspection.

Feasibility Assessment of the Implementation of Solar and Wind Energy Technologies in the Current Context of Iran-Case Study: Kerman

2015 ◽  
Vol 74 (4) ◽  
Author(s):  
Danial Monsefi Parapari ◽  
Shima Taslim ◽  
Arezou Shafaghat
Keyword(s):  
Wind Energy ◽  
Quantitative Methods ◽  
Renewable Energies ◽  
Feasibility Assessment ◽  
Energy Technologies ◽  
Private Households ◽  
Current Context ◽  
The Government ◽  
The Cost

One of the most important issues in various energy issues is to decrease fossil fuel energy usage and promote renewable energies in developing countries. Iran as a developing country began exploiting renewable resources from the early 1990s. This paper investigates the financial viability of renewable energy technologies in Kerman, which is located in the hot and dry parts of Iran and has a high potential of solar and wind energy. First the potential for solar and wind energy sources are studied and afterwards through two quantitative methods, the cost of this implementation is compared to the benefits gained. The results prove that without a massive financial support by the government, renewable energies would not be economically feasible to be implemented into private households.

Developing Schedule With Linear Programming (Case Study: STTF II Project Komplek Sukamukti Banjaran)

2020 ◽  
Vol 4 (02) ◽  
pp. 34-45
Author(s):  
Naufal Dzikri Afifi ◽  
Ika Arum Puspita ◽  
Mohammad Deni Akbar
Keyword(s):  
Linear Programming ◽  
Objective Function ◽  
Project Scheduling ◽  
Time Limit ◽  
Minimum Time ◽  
Service Cost ◽  
Trade Off ◽  
Overtime Work ◽  
The Cost

Shift to The Front II Komplek Sukamukti Banjaran Project is one of the projects implemented by one of the companies engaged in telecommunications. In its implementation, each project including Shift to The Front II Komplek Sukamukti Banjaran has a time limit specified in the contract. Project scheduling is an important role in predicting both the cost and time in a project. Every project should be able to complete the project before or just in the time specified in the contract. Delay in a project can be anticipated by accelerating the duration of completion by using the crashing method with the application of linear programming. Linear programming will help iteration in the calculation of crashing because if linear programming not used, iteration will be repeated. The objective function in this scheduling is to minimize the cost. This study aims to find a trade-off between the costs and the minimum time expected to complete this project. The acceleration of the duration of this study was carried out using the addition of 4 hours of overtime work, 3 hours of overtime work, 2 hours of overtime work, and 1 hour of overtime work. The normal time for this project is 35 days with a service fee of Rp. 52,335,690. From the results of the crashing analysis, the alternative chosen is to add 1 hour of overtime to 34 days with a total service cost of Rp. 52,375,492. This acceleration will affect the entire project because there are 33 different locations worked on Shift to The Front II and if all these locations can be accelerated then the duration of completion of the entire project will be effective

Data Analytics to Help Improve Hydraulic Fracture Geometry Prediction Using Support Vector Regression: Case Study

2020 ◽  
Author(s):  
Avinash Wesley ◽  
Bharat Mantha ◽  
Ajay Rajeev ◽  
Aimee Taylor ◽  
Mohit Dholi ◽  
...  
Keyword(s):  
Support Vector Regression ◽  
Hydraulic Fracture ◽  
Data Analytics ◽  
Support Vector ◽  
Fracture Geometry

Perancangan dan Pembuatan Alat Bantu Meja Putar untuk Mesin Cnc 4 Axis

2016 ◽  
Vol 10 (2) ◽  
pp. 162-171
Author(s):  
Hafid Hafid ◽  
Tatang Sutisna
Keyword(s):  
Processing Time ◽  
Rotary Table ◽  
Engineering Process ◽  
Cnc Machine ◽  
Economical Analysis ◽  
Machining Center ◽  
Design And Manufacturing ◽  
The Cost ◽  
Productivity And Competitiveness

The design and manufacturing of the rotary table with the specification Ø 170 mm (6 inches) for CNC machine 4 axis has been done. The objective of manufacturing a rotary table is to increase the efficiency of CNC machine Hardford 4 axis to be above 80% in line machining center CV. IM’s workshop. The engineering methods was taken, consist of: working preparation, manufacturing of working drawing, engineering process, the manufacturing and testing. The prototype has been tested and operated, the resulting of increasing productivity of which were as follows: the process of assembling was increased to be 3 time ( before 1 time) and processing time for a specific case reduced from 5 hours to 3 hours, number of operators for the case of assembling the rotary reduced to 1 person (before 4 persons), safety and security become to be better. The results show increased efficiency of CNC machine Hardford, from under 50% to be above 80%. Based on the economical analysis obtained by the cost of good sold (C.G.S) of the rotary table is IDR 34.060.000. The results presented in this paper is expected to be case study for developing a business of the metal and engineering SMEs domestic to the effort of improving efficiency, quality, productivity and competitiveness in global market.ABSTRAKPerancangan dan pembuatan alat bantu meja putar (rotary table) dengan spesifikasi teknis Ø 170 mm (6 inci) untuk mesin CNC 4 axis telah dilakukan. Tujuan pembuatan rotary table adalah untuk meningkatkan efisiensi mesin CNC Hardford 4 axis di atas 80% pada line machining center Bengkel CV. IM. Metode rancang bangun yang dilakukan, meliputi: persiapan kerja, pembuatan gambar kerja, proses engineering, pembuatan dan uji coba. Prototip tersebut telah diuji coba dan dioperasikan dengan hasil peningkatan produktivitas sebagai berikut: proses pengerjaan bongkar pasang meningkat menjadi 3 kali (sebelumnya 1 kali) dan waktu pengerjaan untuk kasus tertentu berkurang dari 5 jam menjadi 3 jam, jumlah operator untuk kasus bongkar pasang rotary berkurang menjadi 1 orang (sebelumnya 4 orang), keselamatan kerja dan keamanan menjadi lebih baik. Hasil peningkatan berupa efisiensi mesin CNC Hardford 4 axis dari sebelumnya di bawah 50% menjadi di atas 80%. Berdasarkan hasil perhitungan analisis ekonomi diperoleh harga pokok produksi (HPP) alat bantu meja putar adalah sebesar Rp. 34.060.000. Bahasan ini diharapkan menjadi contoh kasus bagi pengembangan usaha IKM logam dan mesin dalam negeri untuk meningkatkan efisiensi, mutu, produktivitas dan keunggulan daya saing di pasar global.Kata kunci: alat bantu meja putar, mesin CNC, harga pokok produksi

Case Study—Failure Analysis of a Multiplexer

2016 ◽  
Author(s):  
Michael Woo ◽  
Marcos Campos ◽  
Luigi Aranda
Keyword(s):  
Failure Analysis ◽  
High Reliability ◽  
Component Failure ◽  
Root Cause ◽  
Knowing That ◽  
Cause Of Failure ◽  
The Cost

Abstract A component failure has the potential to significantly impact the cost, manufacturing schedule, and/or the perceived reliability of a system, especially if the root cause of the failure is not known. A failure analysis is often key to mitigating the effects of a componentlevel failure to a customer or a system; minimizing schedule slips, minimizing related accrued costs to the customer, and allowing for the completion of the system with confidence that the reliability of the product had not been compromised. This case study will show how a detailed and systemic failure analysis was able to determine the exact cause of failure of a multiplexer in a high-reliability system, which allowed the manufacturer to confidently proceed with production knowing that the failure was not a systemic issue, but rather that it was a random “one time” event.

The Concept of the Optimum Alignment of Discharge Pipelines Due to the Minimization of the Wave Forces

1992 ◽  
Vol 25 (9) ◽  
pp. 211-216
Author(s):  
A. Akyarli ◽  
Y. Arisoy
Keyword(s):  
Wave Height ◽  
Wave Force ◽  
Wave Forces ◽  
Wave Direction ◽  
Incoming Wave ◽  
Pipeline Route ◽  
Optimum Alignment ◽  
The Cost ◽  
Resultant Wave

As the wave forces are the function of the wave height, period and the angle between the incoming wave direction and the axis of the discharge pipeline, the resultant wave force is directly related to the alignment of the pipeline. In this paper, a method is explained to determine an optimum pipeline route for which the resultant wave force becomes minimum and hence, the cost of the constructive measures may decrease. Also, the application of this method is submitted through a case study.

Neither Victors nor Victims

2017 ◽  
Author(s):  
David Whetham
Keyword(s):  
First Century ◽  
National Interests ◽  
Civil Military Relations ◽  
High Street ◽  
National Survival ◽  
The Uk ◽  
Military Relations ◽  
The Cost ◽  
Realistic Goal

Between 2007 and 2011, Wootton Bassett, a small Wiltshire town in the UK, became the focus of national attention as its residents responded to the regular repatriations of dead soldiers through its High Street. The town’s response came to symbolize the way that broader attitudes developed and changed over that period. As such, it is a fascinating case study in civil–military relations in the twenty-first century. Success may be the same as victory, but victory, at least as it has been traditionally understood, is not a realistic goal in many types of contemporary conflict. Discretionary wars—conflicts in which national survival is not an issue and even vital national interests may not be at stake—pose particular challenges for any government which does not explain why the cost being paid in blood and treasure is ‘worth it’.

Sign in / Sign up

Export Citation Format

Share Document