scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

Surrounding Rock Classification in Deep Roadway of Coal Mine

2011 ◽  
Vol 181-182 ◽  
pp. 242-246 ◽  
Author(s):  
Bin Liu ◽  
Quan Sheng Liu
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Support Design ◽  
Geological Investigation ◽  
Rock Classification ◽  
Rock Stability ◽  
Mining Depth ◽  
Deep Rock ◽  
Ground Stress ◽  
The Stability

With the increase of mining depth，most coals in China have been deep mining stage. Compared to the shallow roadway, the characteristics of deformation-failure of surrounding rock show significant differences in the deep roadway, and the deep rock features of the surrounding rock are not considered in the traditional classification of roadway. So it is needed that systematical study on the surrounding rock classification for the stability evaluation of the deep roadway to meet the demand of the support design and the construction of the deep roadway in coal mine of China. The paper puts forward classification system of surrounding rock in deep roadway of coal mine according to on-the-spot geological investigation, rock ultrasonic testing, in-situ ground stress testing and comprehensive analysis on the surrounding rock stability of deep roadway in typical ore area.

scholarly journals Study of the Stability Control of the Rock Surrounding Double-Key Strata Recovery Roadways in Shallow Seams

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan
Keyword(s):  
Engineering Application ◽  
Stability Control ◽  
Surrounding Rock ◽  
Control Effect ◽  
Pressure Relief ◽  
Support Design ◽  
Key Strata ◽  
Fracture Development ◽  
Surrounding Rock Control ◽  
The Stability

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.

Geo-Stress Measurement and its Application in the Yangchangwan Coal Mine

2013 ◽  
Vol 353-356 ◽  
pp. 398-402
Author(s):  
Xiao Yu Zhang ◽  
Feng Ming Liu ◽  
Gang Chen
Keyword(s):  
Stability Analysis ◽  
Coal Mine ◽  
Basic Parameter ◽  
Stress Measurement ◽  
Three Dimensional ◽  
Stress Relief ◽  
Tectonic Stress ◽  
Surrounding Rock ◽  
Support Design ◽  
Rock Stability

The initial stress of rock is a basic parameter, which can be used for surrounding rock stability analysis, exploitation and support design. By utilizing stress relief method of hollow inclusion with its characters of high precision and obtaining three dimensional stress at one time, we have measured three dimensional stress magnitude and direction in north wing roadway (-850m) and 710 open-off cut (-1000m), respectively. The results show that the horizontal tectonic stress is obvious in this coal area.

scholarly journals Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yalong Li ◽  
Mohanad Ahmed Almalki ◽  
Cheng Li
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Control Measures ◽  
Coal Face ◽  
Support Design ◽  
Working Face ◽  
Surrounding Rock Control ◽  
Mining Face ◽  
Mining Pressure

Abstract For the comprehensive mechanised coal mining technology, the support design of the main withdrawal passage in the working face is an important link to achieve high yield and efficiency. Due to the impact of mining, the roof movement of the withdrawal passage is obvious, the displacement of the coal body will increase significantly, and it is easy to cause roof caving and serious lamination problems, and even lead to collapse accidents, which will affect the normal production of the mine. In this paper, the mining pressure development law of the main withdrawal passage support under the influence of dynamic pressure is designed, the most favourable roof failure form of the withdrawal passage is determined, and the action mechanism and applicable conditions of different mining pressure control measures are studied. The pressure appearance and stress distribution in the final mining stage of fully mechanised coal face are studied by numerical simulation. The deformation and failure characteristics and control measures of roof overburden in the last mining stage of fully mechanised coal face are analysed theoretically. Due to the fact that periodic pressure should be avoided as far as possible after the full-mechanised mining face is connected with the retracement passage, some auxiliary measures such as mining height control and forced roof blasting are put forward on this basis. The relative parameters of the main supporting forms are calculated. The main retracement of a fully mechanised working face in a coal mine channel is put forward to spread the surrounding rock grouting reinforcement, reinforcing roof, and help support and improve the bolt anchoring force, the main design retracement retracement channels in the channel near the return air along the trough for supporting reinforcing surrounding rock control optimisation measures, such as through the numerical simulation analysis, the optimisation measures for coal mine fully mechanised working face of surrounding rock is feasible. Numerical simulation results also show that the surrounding rock control of fully mechanised working face of coal mine design improvements, its main retreat channel under the roof subsidence, cribbing shrank significantly lower, and closer, to better control the deformation of surrounding rock, achieved significant effect, to ensure the safety of coal mine main retracement channel of fully mechanised working face support.

scholarly journals Study of the Stability Control of Rock Surrounding Longwall Recovery Roadways in Shallow Seams

2020 ◽  
Vol 2020 ◽  
pp. 1-22
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Chaogui Meng ◽  
Shengzhi Wang
Keyword(s):  
Rock Pressure ◽  
Coal Mine ◽  
Stability Control ◽  
Control Effect ◽  
Support Design ◽  
Key Strata ◽  
Key Stratum ◽  
Discriminative Approach ◽  
The Stability ◽  
Working Resistance

The rock pressure appearance of longwall faces in shallow seams is generally violent, and roofs and supports are susceptible to damage during equipment extraction. Stability control of the rock surrounding longwall recovery roadways allows safe and rapid equipment extraction. Herein, via theoretical analysis, numerical simulations, and field observations, the stability control of the rock surrounding recovery roadways is studied to ensure the release of the accumulated rock pressure on the roof, the working resistance of the supports and the reasonableness of the recovery roadway support design. Pressure-relief technology is introduced to release the accumulated rock pressure before equipment extraction, and a discriminative approach is proposed to determine the breaking and articulated forms of key strata and broken blocks, respectively. On this basis, mechanical models of roof instability are established based on four key stratum structures in the overburden of shallow seams. Methods for calculating a reasonable working resistance for supports are discussed. Finally, Liangshuijing Coal Mine and Fengjiata Coal Mine are taken as research objects to evaluate the roof stability of recovery roadways based on observations of weighting characteristics. The support working resistances and reasonable recovery roadway widths under three key stratum structures are determined. Considering the time effect of plastic zone development, the support design of recovery roadways is optimized. FLAC2D software simulates the surrounding rock control effect of two support designs, and roof subsidence curves are obtained. The results show that the key to equipment extraction in shallow seams is to ensure that supports have reasonable working resistances and to improve the support of recovery roadways. The results provide a reference for the selection and extraction of supports in shallow seam faces.

Stress Distribution Characteristics in Rock Surrounding Heading Face and its Relationship with Temporary Supporting

2014 ◽  
Vol 568-570 ◽  
pp. 1684-1689
Author(s):  
Zhong Han Chen
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Zenith Distance ◽  
Rock Stability ◽  
Coal Roadway ◽  
Temporary Support ◽  
The Stability ◽  
Roadway Deformation ◽  
Mine Roof ◽  
Roof Deformation

To solve the problem of underground tunneling face from the empty top, using FLAC3D analysis software, surrounding rock stability for coal roadway 2-1121 of Ganhe Coal Mine are analyzed in numerical calculation. (1) During the tunneling, distance drivage face head-on 0.5-1m at the roof of roadway deformation and destruction features are more obvious, the two sides of roadway are even more significant. (2) Ganhe Coal Mine roof deformation has been established with different empty the experience formula of the zenith distance, obtained Ganhe underground tunneling face reasonable empty zenith distance is 3.5m. (3) Temporary support can obviously reduce roof deformation, reduce thickness of plastic zone of the top, to improve the stability of surrounding rock tunneling faces.

scholarly journals Research and Application of Directional Roof Cutting and Pressure Releasing Technology for Retracement Channel of 3314 Working Face in Hexi Coal Mine

2021 ◽  
Author(s):  
Jindong Cao ◽  
Xiaojie Yang ◽  
Ruifeng Huang ◽  
Qiang Fu ◽  
Yubing Gao
Keyword(s):  
Coal Mine ◽  
High Stress ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Mine Pressure ◽  
Working Face ◽  
Geological Conditions ◽  
Cutting Effect ◽  
The Stability ◽  
Two Sides

Abstract The high stress of the surrounding rock of Hexi Coal Mine easily leads to severe deformation of the retracement channel and the appearance of the mine pressure during the retreat severely affects the stability of the roadway. In order to solve the above problems, a roadway surrounding rock control technology is proposed and tested. The bidirectional energy-concentrated tensile blasting technology is used to perform directional cutting to cut off the stress propagation path. Firstly, the deformation mechanism of the roof is analyzed by establishing the deformation mechanical model of the roof of the retracement channel. Then, according to the geological conditions of working face 3314 and theoretical calculation, the key parameters of roof cutting and pressure releasing of retracement channel are determined, and through the numerical analysis of its cutting effect, the length of cutting seam is 11.5m, and the cutting angle is 10°. Finally, a field test is carried out on the retracement channel of 3314 working face to verify the effect of roof cutting. The results show that the deformation of the retracement channel and the main roadway is very small. In the process of connecting the working face and the retracement channel, the maximum roof to floor convergence is 141mm, and the two sides convergence is 79mm. After the hydraulic support was retracted, the maximum roof to floor convergence of the surrounding rock is 37 mm, and the two sides convergence is 33mm. The roof cutting and pressure releasing of the retracement channel ensures the safe evacuation of the equipment and the stability of the main roadway. The cutting effect is obvious for the release of pressure, which is of great significance to engineering practice.

scholarly journals Risk Analysis and Extension Assessment for the Stability of Surrounding Rock in Deep Coal Roadway

2019 ◽  
Vol 16 (23) ◽  
pp. 4752
Author(s):  
Chunjing Gao ◽  
Dongmei Huang ◽  
Xikun Chang ◽  
Han Xi
Keyword(s):  
Rock Mass ◽  
Risk Analysis ◽  
Coal Mine ◽  
Element Model ◽  
Surrounding Rock ◽  
Deep Mine ◽  
Factors Affecting ◽  
Rock Stability ◽  
The Stability ◽  
Hazard Sources

In order to evaluate the surrounding rock stability of deep roadways, the diversity of accident hazard sources in deep coal mining is statistically analyzed. To conduct an effective evaluation, first, the risk analysis of the factors affecting the rock mass accidents is carried out, and the comprehensive safety index system of rock accidents in deep mine roadway is established. Further, combining the theory of hazard sources with the extension method, a matter–element model for the risk assessment of rock mass accidents in deep roadway is established. Finally, the hazard sources for the surrounding rock stability of deep roadway in the E-Zhuang coal mine of Xinwen Ming area are evaluated. The results show that the risk grade of the surrounding rock for deep roadways in E-Zhuang coal mine is “B”, which is generally safe, the human factors and organizational management factors are relatively safe, and some suggestions for improvement are put forward.

Combined Support Technology with Bolt, Steel Mesh and Anchor Applied in Baoxin Coal Mine

2014 ◽  
Vol 672-674 ◽  
pp. 1818-1822
Author(s):  
Bao Sheng Song ◽  
Dan Yang Jing ◽  
Shi Ting Zhu ◽  
Lin Lin Chen
Keyword(s):  
Coal Mine ◽  
Simulation Analysis ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Support Program ◽  
Control Effect ◽  
Steel Mesh ◽  
Geological Conditions ◽  
The Stability ◽  
Bolt Steel

For the caving danger of the haulage roadway with thin and broken coal roof in Baoxin coal mine, the combined support technology with bolt, steel mesh and anchor was proposed. According to the geological conditions of the mine, the appropriate support program was determined. The simulation analysis by FLAC3D software showed that the program could effectively increase the roadway confining pressure, reduce roadway displacement and deformation, and thus keep the stability of the surrounding rock. Site practice showed that the support program was feasible and the control effect was good.

scholarly journals Stress Distribution and Optimum Spacing Determination of Double-Withdrawal-Channel Surrounding Rocks: A Case Study of Chinese Coal Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Yanjun He ◽  
Jianhua Li
Keyword(s):  
Stress Distribution ◽  
Coal Mine ◽  
Field Measurements ◽  
Mining Area ◽  
Surrounding Rock ◽  
Rock Stability ◽  
Working Face ◽  
Optimum Spacing ◽  
Chinese Coal ◽  
Mining Height

In this study, the 31113 fully mechanised working face in the Lijiahao Coal Mine was selected as the project background. The failure characteristics and optimum spacing of a double-withdrawal-channel surrounding rock were extensively investigated through field measurements, theoretical analysis, and numerical simulations. The following results were obtained. The loading influence range of the working face was fixed. Under the influence of mining, the stress distribution variation in the double-withdrawal channels with spacing and the influence of stress distribution on the surrounding rock stability of the withdrawal channels were determined. The optimum distance between the double-withdrawal channels to achieve the stability of the surrounding rock was at least 25 m, and engineering measures are required to limit the mining height in the final mining stage. The rationality of the main and auxiliary withdrawal channel spacing of 25 m and measures to limit the mining height in the final stage were demonstrated. The findings of this study provide a valuable reference for constructing the layout of withdrawal channels in the adjacent working faces of the same mining area.

Sign in / Sign up

Export Citation Format

Share Document