Combined Support Technology with Bolt, Steel Mesh and Anchor Applied in Baoxin Coal Mine

2014 ◽  
Vol 672-674 ◽  
pp. 1818-1822
Author(s):  
Bao Sheng Song ◽  
Dan Yang Jing ◽  
Shi Ting Zhu ◽  
Lin Lin Chen
Keyword(s):  
Coal Mine ◽  
Simulation Analysis ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Support Program ◽  
Control Effect ◽  
Steel Mesh ◽  
Geological Conditions ◽  
The Stability ◽  
Bolt Steel

For the caving danger of the haulage roadway with thin and broken coal roof in Baoxin coal mine, the combined support technology with bolt, steel mesh and anchor was proposed. According to the geological conditions of the mine, the appropriate support program was determined. The simulation analysis by FLAC3D software showed that the program could effectively increase the roadway confining pressure, reduce roadway displacement and deformation, and thus keep the stability of the surrounding rock. Site practice showed that the support program was feasible and the control effect was good.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

The Monitoring and Numerical Simulation Analysis on the Construction of a Shallow Underpass

2014 ◽  
Vol 580-583 ◽  
pp. 1056-1060
Author(s):  
Li Sheng Liu ◽  
Jie Zhao
Keyword(s):  
Simulation Analysis ◽  
Dynamic Monitoring ◽  
Ground Settlement ◽  
Control Effect ◽  
Influence Curves ◽  
Geological Conditions ◽  
Vertical Ground ◽  
The Stability ◽  
Underground Passage ◽  
Strain Model

Based on the dynamic monitoring project of one underpass in Dalian, this paper tries to validate the control effect of the ground settlement on the stability of tunnel surrounding rocks during construction of underground passage under urban arterial road by means of analyzing the vertical ground settlement curves, convergence curves of tunnel inner perimeter and vault displacement curves. With the numerical calculation tool of the software FLAC, it also analyzes the construction of XS-2 # cross-section which was in the south side of the whole construction section at different stages by adopting the plane-strain model. Therefore, we can get the influence curves of ground settlement under different construction stages with considering the release of stress. The simulation results are basically consistent with the measured data, which has a great significance for the subsequent design and construction of underground projects with similar geological conditions.

Numerical Simulation of Bolt-Mesh-Anchor Support Technology at Soft Rock Roadway

2013 ◽  
Vol 868 ◽  
pp. 251-254 ◽  
Author(s):  
Hui Yu ◽  
Ling Gen Kong ◽  
Zhi Yong Niu ◽  
Shi Ting Zhu ◽  
Dan Yang Jing
Keyword(s):  
Simulation Analysis ◽  
Soft Rock ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Numerical Software ◽  
The Stability ◽  
Roadway Deformation ◽  
Soft Rock Roadway ◽  
Surrounding Rock Stress ◽  
Rock Roadway

The roof of 12501 transportation roadway of Tunlan mine is friable. To solve the problem of large roadway deformation, the bolt-mesh-anchor support scheme is put forward. With the FLAC3D numerical software in the program, the simulation analysis shows that the program can effectively increase the roadway confining pressure to improve the state of the surrounding rock stress, reduce roadway displacement and deformation and thus keep the stability of the surrounding rock. The results show that Bolt and cable support can effectively control the surrounding rock, with the roadway convergence rate small, and the support system safe.

scholarly journals Research and Application of Directional Roof Cutting and Pressure Releasing Technology for Retracement Channel of 3314 Working Face in Hexi Coal Mine

2021 ◽  
Author(s):  
Jindong Cao ◽  
Xiaojie Yang ◽  
Ruifeng Huang ◽  
Qiang Fu ◽  
Yubing Gao
Keyword(s):  
Coal Mine ◽  
High Stress ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Mine Pressure ◽  
Working Face ◽  
Geological Conditions ◽  
Cutting Effect ◽  
The Stability ◽  
Two Sides

Abstract The high stress of the surrounding rock of Hexi Coal Mine easily leads to severe deformation of the retracement channel and the appearance of the mine pressure during the retreat severely affects the stability of the roadway. In order to solve the above problems, a roadway surrounding rock control technology is proposed and tested. The bidirectional energy-concentrated tensile blasting technology is used to perform directional cutting to cut off the stress propagation path. Firstly, the deformation mechanism of the roof is analyzed by establishing the deformation mechanical model of the roof of the retracement channel. Then, according to the geological conditions of working face 3314 and theoretical calculation, the key parameters of roof cutting and pressure releasing of retracement channel are determined, and through the numerical analysis of its cutting effect, the length of cutting seam is 11.5m, and the cutting angle is 10°. Finally, a field test is carried out on the retracement channel of 3314 working face to verify the effect of roof cutting. The results show that the deformation of the retracement channel and the main roadway is very small. In the process of connecting the working face and the retracement channel, the maximum roof to floor convergence is 141mm, and the two sides convergence is 79mm. After the hydraulic support was retracted, the maximum roof to floor convergence of the surrounding rock is 37 mm, and the two sides convergence is 33mm. The roof cutting and pressure releasing of the retracement channel ensures the safe evacuation of the equipment and the stability of the main roadway. The cutting effect is obvious for the release of pressure, which is of great significance to engineering practice.

Numerical Analysis on Concrete Filled Steel Tube Supports Support Technology of III-Level South Roadway in Yangzhuang Mine

2013 ◽  
Vol 711 ◽  
pp. 385-390
Author(s):  
Hong Ying Zhang ◽  
Xue Bin Li ◽  
Zheng Xing Ma ◽  
Chao Wang ◽  
Zheng Ze Wang
Keyword(s):  
Simulation Analysis ◽  
Steel Tube ◽  
Surrounding Rock ◽  
Support Structure ◽  
Roadway Stability ◽  
Geological Conditions ◽  
Roadway Support ◽  
The Stability ◽  
Supporting Force ◽  
Core Concrete

Combined with engineering conditions of the III-level south roadway of Yangzhuang Mine, the deformation of surrounding rock and mechanical characteristics of support structure is analyzed by FLAC3D numerical simulation when the roadway is supported by CFSTS support program . The results shows that: For the weak mudstone surrounding rock and complex geological conditions, the deformation of surrounding rock is fast, large and unsymmetrical deformation, the bolt-net-shotcrete support is difficult to maintain the roadway stability. the CFSTS used Φ219 ×8mm steel tube filled with C50 core concrete, which provides powerful supporting force combined with other roadway support ways and restrict surrounding rock to the roadway space. By FLAC3D simulation analysis shows, the deformation of surrounding rock is small and support structure is mad good use and keep work, which can maintain the stability of roadway.

scholarly journals A Case Study on Large Deformation Failure Mechanism of Coal given Chamber and Invention of a New Wall-Mounted Coal Bunker in Xiashijie Coal Mine with Soft, Swelling Floor Rock

2017 ◽  
Author(s):  
Xingkai Wang ◽  
Wenbing Xie ◽  
Shengguo Jing ◽  
Jianbiao Bai ◽  
Zhili Su
Keyword(s):  
Failure Mechanism ◽  
Coal Mine ◽  
Numerical Models ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Floor Rock ◽  
Geological Conditions ◽  
Floor Heave ◽  
The Stability ◽  
Bearing Structure

Serious damage caused by floor heave in the coal given chamber of a vertical coal bunker is one of the challenges faced in underground coal mines. Engineering practice shows that it is more difficult to maintain the coal given chamber (CGC) than a roadway. More importantly, repairing the CGC during mining practice will pose major safety risks and reduce production. Based on the case of the serious collapse that occurred in the bearing structure of the CGC at the lower part of the 214# coal bunker in Xiashijie mine, China, this work analysed (i) the main factors influencing floor heave and (ii) the failure mechanism of the load-bearing structure in the CGC using FLAC2D numerical models and expansion experiment. The analysis results indicate that: the floor heave, caused mainly by mine water, is the basic reason leading to the instability and repeated failure of the CGC in the 214# coal bunker. Then a new coal bunker, without building the CGC, is proposed and put into practice to replace the 214# coal bunker. The FLAC3D software program is adopted to establish the numerical model of the wall-mounted coal bunker (WMCB), and the stability of the rock surrounding the WMCB is simulated and analysed. The results show that: (1) the rock surrounding the sandstone segment is basically stable. (2) The surrounding rock in the coal seam segment, which moves into the inside of the bunker, is the main zone of deformation for the entire rock mass surrounding the bunker. Then the surrounding rock is controlled effectively by means of high-strength bolt–cable combined supporting technology. According to the geological conditions of the WMCB, the self-bearing system, which includes (i) H-steel beams, (ii) H-steel brackets, and (iii) self-locking anchor cables, is established and serves as a substitute for the CGC to transfer the whole weight of the bunker to stable surrounding rock. The stability of the new coal bunker has been verified by field testing, and the coal mine has gained economic benefit to a value of 158.026174 million RMB over three years. The new WMCB thus made production more effective and can provide helpful references for construction of vertical bunkers under similar geological conditions.

Numerical Simulation on Strengthening Supporting Mechanism and Effect of Anchor-Cables in Deep Coal Mine Roadway

2012 ◽  
Vol 170-173 ◽  
pp. 3512-3515
Author(s):  
Ju Cai Chang ◽  
Guang Xiang Xie
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Good Time ◽  
Lagrangian Analysis ◽  
Deformation And Failure ◽  
Deep Coal Mine ◽  
Geological Conditions ◽  
Stress States ◽  
The Stability ◽  
Roadway Deformation

Prestressed anchor-cables supporting technology has become the primary measure for reinforcing the roadway of deep coal mine and complex geological conditions. In this paper, fast Lagrangian analysis of continua (FLAC3D) code is used to analyze the laws of stress, deformation and failure of surrounding rock with and without roadway supporting by anchor-cables. The supporting action mechanism and effect of anchor-cables have been investigated into systematically. The results show that the anchor-cables supporting is adopted at reasonable positions of the roadway in good time which can improve the stress states of deep surrounding rock, decrease the range of failure zone around the roadway, control the roadway deformation effectively and maintain the stability of roadway.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

Reasonable Entry Layout of Lower Seam in Multi-Seam Mining Based on Numerical Simulation

2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Coal Seam ◽  
Coal Mine ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Geological Conditions ◽  
Seam Mining

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.

scholarly journals Study of the Stability Control of the Rock Surrounding Double-Key Strata Recovery Roadways in Shallow Seams

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan
Keyword(s):  
Engineering Application ◽  
Stability Control ◽  
Surrounding Rock ◽  
Control Effect ◽  
Pressure Relief ◽  
Support Design ◽  
Key Strata ◽  
Fracture Development ◽  
Surrounding Rock Control ◽  
The Stability

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.

Sign in / Sign up

Export Citation Format

Share Document