Geo-Stress Measurement and its Application in the Yangchangwan Coal Mine

2013 ◽  
Vol 353-356 ◽  
pp. 398-402
Author(s):  
Xiao Yu Zhang ◽  
Feng Ming Liu ◽  
Gang Chen
Keyword(s):  
Stability Analysis ◽  
Coal Mine ◽  
Basic Parameter ◽  
Stress Measurement ◽  
Three Dimensional ◽  
Stress Relief ◽  
Tectonic Stress ◽  
Surrounding Rock ◽  
Support Design ◽  
Rock Stability

The initial stress of rock is a basic parameter, which can be used for surrounding rock stability analysis, exploitation and support design. By utilizing stress relief method of hollow inclusion with its characters of high precision and obtaining three dimensional stress at one time, we have measured three dimensional stress magnitude and direction in north wing roadway (-850m) and 710 open-off cut (-1000m), respectively. The results show that the horizontal tectonic stress is obvious in this coal area.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

Surrounding Rock Classification in Deep Roadway of Coal Mine

2011 ◽  
Vol 181-182 ◽  
pp. 242-246 ◽  
Author(s):  
Bin Liu ◽  
Quan Sheng Liu
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Support Design ◽  
Geological Investigation ◽  
Rock Classification ◽  
Rock Stability ◽  
Mining Depth ◽  
Deep Rock ◽  
Ground Stress ◽  
The Stability

With the increase of mining depth，most coals in China have been deep mining stage. Compared to the shallow roadway, the characteristics of deformation-failure of surrounding rock show significant differences in the deep roadway, and the deep rock features of the surrounding rock are not considered in the traditional classification of roadway. So it is needed that systematical study on the surrounding rock classification for the stability evaluation of the deep roadway to meet the demand of the support design and the construction of the deep roadway in coal mine of China. The paper puts forward classification system of surrounding rock in deep roadway of coal mine according to on-the-spot geological investigation, rock ultrasonic testing, in-situ ground stress testing and comprehensive analysis on the surrounding rock stability of deep roadway in typical ore area.

scholarly journals Controlling Mechanism of Rock Burst by CO2 Fracturing Blasting Based on Rock Burst System

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Tianwei Lan ◽  
Chaojun Fan ◽  
Jun Han ◽  
Hongwei Zhang ◽  
Jiawei Sun
Keyword(s):  
Coal Mining ◽  
Rock Burst ◽  
Coal Mine ◽  
Prevention And Control ◽  
Stress Measurement ◽  
Tectonic Stress ◽  
Microseismic Monitoring ◽  
Time Space ◽  
Controlling Mechanism ◽  
And Control

Rock burst induced by mining is one of the most serious dynamic disasters in the process of coal mining. The mechanism of a rock burst is similar to that of a natural earthquake. It is difficult to accurately predict the “time, space, and strength” of rock burst, but the possibility of rock burst can be predicted based on the results of microseismic monitoring. In this paper, the rock burst system under the tectonic stress field is established based on the practice of coal mining and the result of mine ground crustal stress measurement. According to the magnitude of microseismic monitoring, the amount of the energy and spatial position of the rock burst are determined. Based on the theory of explosion mechanics, aiming at the prevention and control of rock burst in the coal mine, the technique of liquid CO2 fracturing blasting is put forward. By the experiment of blasting mechanics, the blasting parameters are determined, and the controlling mechanism of rock burst of liquid CO2 fracturing blasting is revealed. The application of liquid CO2 fissure blasting technology in the prevention and control of rock burst in Jixian Coal Mine shows that CO2 fracturing blasting reduces the stress concentration of the rock burst system and transfers energy to the deeper part, and there is no open fire in the blasting. It is a new, safe, and efficient method to prevent and control rock burst, which can be applied widely.

Research on Surrounding Rock Stability by Ideal Point-Rough Set Efficacy Coefficient Method

2013 ◽  
Vol 353-356 ◽  
pp. 415-420 ◽  
Author(s):  
Guo Ren Lu ◽  
Le Wen Zhang ◽  
Dao Hong Qiu ◽  
Xiao Feng
Keyword(s):  
Stability Analysis ◽  
Rough Set ◽  
Ideal Point ◽  
Surrounding Rock ◽  
Ideal Solution ◽  
Rock Stability ◽  
The Stability ◽  
Efficacy Coefficient Method ◽  
Coefficient Method ◽  
The Ideal

The ideal point method is a kind of multiple-goal decision analysis method, the basic idea is to construct the ideal and anti-ideal solution of multi attribute problem, with degree that near ideal solution and away from the anti-ideal solution as the basis to judge each evaluation object. Based on the basic principle of ideal point method, and comprehensive consideration of the actual geological conditions of Qingdao metro, we selected rock compressive strength, integrity coefficient, structure surface behavior, groundwater and softening coefficient as the evaluation factors of surrounding rock stability, and used the rough set theory to determine the index weight. At last, established the evaluate model for the surrounding rock stability of metro based on the rough set efficacy coefficient method. The research show that the stability analysis results are consistent with the actual excavation, so using rough set efficacy coefficient method to analysis surrounding rock stability of Qingdao Metro is feasible, which provides a new idea for the stability analysis of surrounding rock.

scholarly journals Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yalong Li ◽  
Mohanad Ahmed Almalki ◽  
Cheng Li
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Control Measures ◽  
Coal Face ◽  
Support Design ◽  
Working Face ◽  
Surrounding Rock Control ◽  
Mining Face ◽  
Mining Pressure

Abstract For the comprehensive mechanised coal mining technology, the support design of the main withdrawal passage in the working face is an important link to achieve high yield and efficiency. Due to the impact of mining, the roof movement of the withdrawal passage is obvious, the displacement of the coal body will increase significantly, and it is easy to cause roof caving and serious lamination problems, and even lead to collapse accidents, which will affect the normal production of the mine. In this paper, the mining pressure development law of the main withdrawal passage support under the influence of dynamic pressure is designed, the most favourable roof failure form of the withdrawal passage is determined, and the action mechanism and applicable conditions of different mining pressure control measures are studied. The pressure appearance and stress distribution in the final mining stage of fully mechanised coal face are studied by numerical simulation. The deformation and failure characteristics and control measures of roof overburden in the last mining stage of fully mechanised coal face are analysed theoretically. Due to the fact that periodic pressure should be avoided as far as possible after the full-mechanised mining face is connected with the retracement passage, some auxiliary measures such as mining height control and forced roof blasting are put forward on this basis. The relative parameters of the main supporting forms are calculated. The main retracement of a fully mechanised working face in a coal mine channel is put forward to spread the surrounding rock grouting reinforcement, reinforcing roof, and help support and improve the bolt anchoring force, the main design retracement retracement channels in the channel near the return air along the trough for supporting reinforcing surrounding rock control optimisation measures, such as through the numerical simulation analysis, the optimisation measures for coal mine fully mechanised working face of surrounding rock is feasible. Numerical simulation results also show that the surrounding rock control of fully mechanised working face of coal mine design improvements, its main retreat channel under the roof subsidence, cribbing shrank significantly lower, and closer, to better control the deformation of surrounding rock, achieved significant effect, to ensure the safety of coal mine main retracement channel of fully mechanised working face support.

Study on Design of Tunnel Section for Danba Diversion Tunnel

2014 ◽  
Vol 501-504 ◽  
pp. 1732-1735
Author(s):  
Jie Liu ◽  
Liang Tang ◽  
Ya Zuo ◽  
Jin Long Guo
Keyword(s):  
Stability Analysis ◽  
Plastic Zone ◽  
Cross Sections ◽  
Surrounding Rock ◽  
Hydropower Station ◽  
Diversion Tunnel ◽  
Rock Stability ◽  
Tunnel Section ◽  
Tunnel Design ◽  
The Stability

Analyzing and Evaluating the stability of the surrounding rock is an indispensable and important part in the tunnel design. In this paper, the surrounding rock stability of Danba hydropower station diversion tunnel is dealt with, FLAC3Dsoftware is used for stability analysis. Selecting three different cross sections for calculation models, comparing with the displacement and principal stress and the plastic zone which calculated by FLAC3D, we can evaluate their stability and get the best diversion tunnel design.

Stress Distribution Characteristics in Rock Surrounding Heading Face and its Relationship with Temporary Supporting

2014 ◽  
Vol 568-570 ◽  
pp. 1684-1689
Author(s):  
Zhong Han Chen
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Zenith Distance ◽  
Rock Stability ◽  
Coal Roadway ◽  
Temporary Support ◽  
The Stability ◽  
Roadway Deformation ◽  
Mine Roof ◽  
Roof Deformation

To solve the problem of underground tunneling face from the empty top, using FLAC3D analysis software, surrounding rock stability for coal roadway 2-1121 of Ganhe Coal Mine are analyzed in numerical calculation. (1) During the tunneling, distance drivage face head-on 0.5-1m at the roof of roadway deformation and destruction features are more obvious, the two sides of roadway are even more significant. (2) Ganhe Coal Mine roof deformation has been established with different empty the experience formula of the zenith distance, obtained Ganhe underground tunneling face reasonable empty zenith distance is 3.5m. (3) Temporary support can obviously reduce roof deformation, reduce thickness of plastic zone of the top, to improve the stability of surrounding rock tunneling faces.

scholarly journals Failure Mechanism Analysis and Support Design for Deep Composite Soft Rock Roadway: A Case Study of the Yangcheng Coal Mine in China

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Bangyou Jiang ◽  
Lianguo Wang ◽  
Yinlong Lu ◽  
Shitan Gu ◽  
Xiaokang Sun
Keyword(s):  
Failure Mechanism ◽  
Coal Mine ◽  
Failure Mechanisms ◽  
Soft Rock ◽  
Deformation Monitoring ◽  
Surrounding Rock ◽  
Support Design ◽  
Soft Rock Roadway ◽  
Rock Roadway

This paper presented a case study of the failure mechanisms and support design for deep composite soft rock roadway in the Yangcheng Coal Mine of China. Many experiments and field tests were performed to reveal the failure mechanisms of the roadway. It was found that the surrounding rock of the roadway was HJS complex soft rock that was characterized by poor rock quality, widespread development of joint fissures, and an unstable creep property. The major horizontal stress, which was almost perpendicular to the roadway, was 1.59 times larger than the vertical stress. The weak surrounding rock and high tectonic stress were the main internal causes of roadway instabilities, and the inadequate support was the external cause. Based on the failure mechanism, a new support design was proposed that consisted of bolting, cable, metal mesh, shotcrete, and grouting. A field experiment using the new design was performed in a roadway section approximately 100 m long. Detailed deformation monitoring was conducted in the experimental roadway sections and sections of the previous roadway. The monitoring results showed that deformations of the roadway with the new support design were reduced by 85–90% compared with those of the old design. This successful case provides an important reference for similar soft rock roadway projects.

Research on Optimization of Bolt Support for Tilted Strata Roadway in Soft Rock

2014 ◽  
Vol 962-965 ◽  
pp. 379-383
Author(s):  
Liang Tian ◽  
Shao Peng Jiao ◽  
Wen Feng Zhao ◽  
Xian Yong Hao ◽  
Cheng Cheng
Keyword(s):  
Failure Mechanism ◽  
Stress Measurement ◽  
Soft Rock ◽  
Tectonic Stress ◽  
Tensile Failure ◽  
Rock Stress ◽  
Support Design ◽  
Original Rock ◽  
Roadway Deformation ◽  
Support Methods

Bad and asymmetrical deformation occurred in soft tilted strata roadway for the existence of tectonic stress, we carried out the study on geostatic stress character and optimizing bolting support parameters in 2# coalbed of Zijin Colliery. Based on original rock stress measurement, broken rock zone measurement and survey of roadway deformation, characters of original rock stress and range of broken rock zone were given. According to existent problems, a variety of numerical computations were carried out by FLAC3D, failure mechanism of roof is shear-tensile failure. New support methods of bolt installed vertically in tilted roof and strengthening support of sidewalls and corners of roadway are figured out. The research was carried out for 600 meters. The monitoring results prove that the optimized support design is viable and the new bolting parameters are reasonable.

Sign in / Sign up

Export Citation Format

Share Document