scholarly journals Heat and Mass Transfer in Stagnation Point Flow of Maxwell Nanofluid Towards a Vertical Stretching Sheet with Effect of Induced Magnetic Field

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Tadesse Walelign ◽  
Eshetu Haile ◽  
Tesfaye Kebede ◽  
Gurju Awgichew
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Nonlinear Differential Equations ◽  
Convective Boundary Condition ◽  
Induced Magnetic Field ◽  
Convective Boundary ◽  
Optimal Homotopy Analysis Method ◽  
Maxwell Nanofluid

This paper presents a mathematical model analysis of heat and mass transfer in a two-dimensional flow of electrically conducting, thermally radiative, and chemically reactive Maxwell nanofluid towards a vertical stretching and permeable sheet embedded in a porous medium. Boundary layer approximation and suitable transformations are used to reduce the governing differential equations convenient for computation. Eventually, the transformed nonlinear differential equations along with the corresponding boundary conditions are solved in the framework of optimal homotopy analysis method. The effects of induced magnetic field, buoyancy force, viscous dissipation, heat source, Joule heating, and convective boundary condition are analyzed in detail. The rates of heat, mass, and momentum transfer with respect to the relevant parameters are also examined in terms of the local Nusselt number, Sherwood number, and skin friction coefficients, respectively. Among the many results of the study, it is shown that the induced magnetic field, flow velocity, and temperature profiles are increasing functions of the Maxwell parameter. The results of the present study are also in a close agreement with previously published results under common assumptions.

scholarly journals MHD Slip Flow of Newtonian Fluid past a Stretching Sheet with Thermal Convective Boundary Condition, Radiation, and Chemical Reaction

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Reda G. Abdel-Rahman
Keyword(s):  
Mass Transfer ◽  
Boundary Condition ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Heat And Mass Transfer ◽  
Chemical Reaction ◽  
Stretching Sheet ◽  
Convective Boundary Condition ◽  
Nonlinear Ordinary Differential Equations ◽  
Convective Boundary

An analysis is carried out to study the problem of heat and mass transfer flow over a moving permeable flat stretching sheet in the presence of convective boundary condition, slip, radiation, heat generation/absorption, and first-order chemical reaction. The viscosity of fluid is assumed to vary linearly with temperature. Also the diffusivity is assumed to vary linearly with concentration. The governing partial differential equations have been reduced to the coupled nonlinear ordinary differential equations by using Lie group point of transformations. The system of transformed nonlinear ordinary differential equations is solved numerically using shooting techniques with fourth-order Runge-Kutta integration scheme. Comparison between the existing literature and the present study was carried out and found to be in excellent agreement. The effects of the various interesting parameters on the flow, heat, and mass transfer are analyzed and discussed through graphs in detail. The values of the local Nusselt number, the local skin friction, and the local Sherwood number for different physical parameters are also tabulated.

Heat and Mass Transfer of a MHD Flows of An Oldroyd 8-Constant Nano-Fluid Through a Non-Darcy Porous Medium

2017 ◽  
Vol 14 (1) ◽  
pp. 321-329
Author(s):  
Abeer A Shaaban
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Porous Medium ◽  
Differential Equations ◽  
Prandtl Number ◽  
Heat And Mass Transfer ◽  
Induced Magnetic Field ◽  
Linear Ordinary Differential Equations ◽  
Nano Fluid ◽  
Non Linear

Explicit finite-difference method was used to obtain the solution of the system of the non-linear ordinary differential equations which transform from the non-linear partial differential equations. These equations describe the steady magneto-hydrodynamic flow of an oldroyd 8-constant non-Newtonian nano-fluid through a non-Darcy porous medium with heat and mass transfer. The induced magnetic field was taken into our consideration. The numerical formula of the velocity, the induced magnetic field, the temperature, the concentration, and the nanoparticle concentration distributions of the problem were illustrated graphically. The effect of the material parameters (α1 α2), Darcy number Da, Forchheimer number Fs, Magnetic Pressure number RH, Magnetic Prandtl number Pm, Prandtl number Pr, Radiation parameter Rn, Dufour number Nd, Brownian motion parameter Nb, Thermophoresis parameter Nt, Heat generation Q, Lewis number Le, and Sort number Ld on those formula were discussed specially in the case of pure Coutte flow (U0 = 1, d <inline-formula> <mml:math display="block"> <mml:mrow> <mml:mover accent="true"> <mml:mi>P</mml:mi> <mml:mo stretchy="true">^</mml:mo> </mml:mover> </mml:mrow> </mml:math> </inline-formula> /dx = 0). Also, an estimation of the global error for the numerical values of the solutions is calculated by using Zadunaisky technique.

scholarly journals Stagnation Point Flow of Nanofluid over a Moving Plate with Convective Boundary Condition and Magnetohydrodynamics

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Fazle Mabood ◽  
Nopparat Pochai ◽  
Stanford Shateyi
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Friction Factor ◽  
Heat And Mass Transfer ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Convective Boundary Condition ◽  
Stagnation Point Flow ◽  
Moving Plate ◽  
Convective Boundary

A theoretical investigation is carried out to examine the effects of volume fraction of nanoparticles, suction/injection, and convective heat and mass transfer parameters on MHD stagnation point flow of water-based nanofluids (Cu and Ag). The governing partial differential equations for the fluid flow, temperature, and concentration are reduced to a system of nonlinear ordinary differential equations. The derived similarity equations and corresponding boundary conditions are solved numerically using Runge-Kutta Fehlberg fourth-fifth order method. To exhibit the effect of the controlling parameters on the dimensionless velocity, temperature, nanoparticle volume fraction, skin friction factor, and local Nusselt and local Sherwood numbers, numerical results are presented in graphical and tabular forms. It is found that the friction factor and heat and mass transfer rates increase with magnetic field and suction/injection parameters.

scholarly journals Heat and Mass Transfer on MHD Flow of a Viscoelastic Fluid through Porous Media over a Shrinking Sheet

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
D. Bhukta ◽  
G. C. Dash ◽  
S. R. Mishra
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Temperature Field ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Viscoelastic Fluid ◽  
Power Law ◽  
Nonlinear Partial Differential Equations ◽  
Shrinking Sheet ◽  
Mass Transfer Effect

An attempt has been made to study the heat and mass transfer effect in a boundary layer flow through porous medium of an electrically conducting viscoelastic fluid over a shrinking sheet subject to transverse magnetic field in the presence of heat source. Effects of radiation, viscous dissipation, and uniform heat sink on the heat transfer have been considered. The method of solution involves similarity transformation. The coupled nonlinear partial differential equations representing momentum, concentration, and nonhomogenous heat equation are reduced into a set of nonlinear ordinary differential equations. The transformed equations are solved by applying Kummer’s function. The exact solution of temperature field is obtained for power-law surface temperature (PST) as well as power-law heat flux (PHF) boundary condition. The interaction of magnetic field is proved to be counterproductive in enhancing velocity and concentration distribution, whereas presence of porous matrix reduces the temperature field at all points.

scholarly journals MHD Heat and Mass Transfer Forced Convection Flow along a Vertical Stretching Sheet with Heat Generation and Radiation

1970 ◽  
Vol 46 (2) ◽  
pp. 169-176
Author(s):  
MA Samad ◽  
S Ahmed
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Forced Convection ◽  
Heat Generation ◽  
Stretching Sheet ◽  
Convection Flow ◽  
Concentration Profiles ◽  
Forced Convection Flow

The present study comprises of steady two dimensional magnetohydrodynamic heat and mass transfer forced convection flow along a vertical stretching sheet in the presence of magnetic field with radiation. The nonlinear partial differential equations governing the flow field occurring in the problem have been transformed to dimensionless nonlinear ordinary differential equations by introducing suitably selected similarity variables. The ensuing equations are simultaneously solved by applying Nachtsheim-Swigert shooting iteration technique with sixth order Runge-Kutta integration scheme. The results in the form of velocity, temperature and concentration profiles are then displayed graphically. The corresponding skin-friction coefficient, Nusselt number and Sherwood number are displayed graphically and also in tabular form as well. Several important parameters such as the prandtl number (Pr), radiation parameter (N), magnetic field parameter (M), heat source parameter (Q), schmidt number (Sc), suction parameter (fw ) and eckert number (Ec) are confronted. The effects of these parameters on the velocity, temperature and concentration profiles are investigated. Key Words: MHD; Forced convection; Stretching sheet; Radiation; Heat generation. DOI: http://dx.doi.org/10.3329/bjsir.v46i2.8183 Bangladesh J. Sci. Ind. Res. 46(2), 169-176, 2011

Entropy generation analysis on unsteady flow of Maxwell nanofluid over the stretched wedge with Cattaneo-Christov double diffusion

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yu Bai ◽  
Huiling Fang ◽  
Yan Zhang
Keyword(s):  
Mass Transfer ◽  
Unsteady Flow ◽  
Heat And Mass Transfer ◽  
Entropy Generation ◽  
Diffusion Theory ◽  
Double Diffusion ◽  
Convective Boundary ◽  
Concentration Difference ◽  
Content Type ◽  
Maxwell Nanofluid

Purpose This paper aims to present the effect of entropy generation on the unsteady flow of upper-convected Maxwell nanofluid past a wedge embedded in a porous medium in view of buoyancy force. Cattaneo-Christov double diffusion theory simulates the processes of energy phenomenon and mass transfer. Meanwhile, Brownian motion, thermophoresis and convective boundary conditions are discussed to further visualize the heat and mass transfer properties. Design/methodology/approach Coupled ordinary differential equations are gained by appropriate similar transformations and these equations are manipulated by the Homotopy analysis method. Findings The result is viewed that velocity distribution is a diminishing function with boosting the value of unsteadiness parameter. Moreover, fluid friction irreversibility is dominant as the enlargement in Brinkman number. Then controlling the temperature and concentration difference parameters can effectively regulate entropy generation. Originality/value This paper aims to address the effect of entropy generation on unsteady flow, heat and mass transfer of upper-convected Maxwell nanofluid over a stretched wedge with Cattaneo-Christov double diffusion, which provides a theoretical basis for manufacturing production.

Sign in / Sign up

Export Citation Format

Share Document