scholarly journals A Damage Constitutive Model of Rock Subjected to Freeze-Thaw Cycles Based on Lognormal Distribution

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Hang Lin ◽  
Linyuan Liang ◽  
Yifan Chen ◽  
Rihong Cao
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Lognormal Distribution ◽  
Constitutive Models ◽  
Strain Curve ◽  
Statistical Distribution ◽  
Freeze Thaw ◽  
Accurate Quantitative Analysis ◽  
Distribution Parameters ◽  
Damage Constitutive Model

The constitutive model of rock is closely connected with the mechanical properties of rock. To achieve a more accurate quantitative analysis of the mechanical properties of rock after the action of freeze-thaw cycles, it is necessary to establish the constitutive models of rock subjected to freeze-thaw cycles from the view of rock damage. Based on the assumption of rock couple damage, this study established a statistical damage constitutive model of rock subjected to freeze-thaw cycles by combining the lognormal distribution, which is commonly used in engineering reliability analysis, and the strain strength theory. Then, the coordinates and derivative at the peak of the stress-strain curve of the rock after the action of freeze-thaw cycles were obtained through experiments to solve the statistical distribution parameters με and S of the model, whereafter, the theoretical curves by the established model were compared with the experimental curves to verify the validity of it, which shows a great agreement. Finally, the sensitivity analysis of the statistical distribution parameters was implemented. The results indicate that με reflects the strength of the rock, which shows a positive relation, and S stands for the brittleness of the rock, which shows a negative relation.

Uniaxial Compression Fractal Damage Constitutive Model of Rock Subjected to Freezing and Thawing

2020 ◽  
Author(s):  
Shengtao Zhou ◽  
Nan Jiang ◽  
Xuedong Luo ◽  
Wen Fang ◽  
Xu He
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Uniaxial Compression ◽  
Residual Strength ◽  
Structural Damage ◽  
Compression Fracture ◽  
Peak Strain ◽  
Freeze Thaw ◽  
Deformation Stage ◽  
Damage Constitutive Model

Mechanical properties of the rock in the cold regions are often affected by freeze-thaw cycles and loads. It is of great theoretical significance and engineering value to establish a uniaxial compression damage constitutive model of the rock under freeze-thaw cycles that can reflect the relationship between macroscopic and mesoscopic structural damage. In this paper, macroscopic and mesoscopic methods are combined with statistical methods to quantitatively analyze the damage degree of rock under freeze-thaw cycles and loads. Combined with the fractal features of the macroscopic image of the section, a fractal damage constitutive model considering the residual strength of rock is established. In addition, the model is subsequently verified by the experiment. The experiment shows that the mechanical properties of rocks subjected to freeze-thaw cycles and loads are determined by freeze-thaw damage variables, load damage variables, and their coupling effects. As the number of freeze-thaw cycles increases, the uniaxial compressive strength and elastic modulus of rocks decrease, and peak strain increases. By using the fractal dimension of the compression fracture surface as a bridge considering the residual strength of the rock, the constitutive model can better reflect the compaction stage, elastic deformation stage and plastic deformation stage of the uniaxial compression process of the freeze-thaw rocks.

scholarly journals Damage constitutive model of stratified cemented backfill based on coupling macroscopic and mesoscopic deformations

2020 ◽  
Vol 194 ◽  
pp. 05024
Author(s):  
Yanan Tang ◽  
Weidong Song ◽  
Jianxin Fu
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Compressive Load ◽  
Strain Curve ◽  
Strength Distribution ◽  
Stress Strain ◽  
Strain Relationship ◽  
Damage Constitutive Model ◽  
Stratified Structure ◽  
Relationship Of

The mechanical properties and stress-strain relationship of cemented backfills with different stratified structure have a direct effect on the mining-filling cycle and the mining of adjacent pillars. To obtain the stress-strain evolution curves, the uniaxial compressive strength tests were performed on backfills with stratified numbers of 0, 1, 2 and 3. The deformation of stratified backfill under the compressive load is regarded as a compound of closed deformation of the macroscopic stratified structure and elastic deformation of material. The damage constitutive model of cemented backfills with different stratified structure are established by considering the influence of compacted section. Comparative analysis reveals that the calculated curve based on the established sectional damage constitutive model conforms well to the trial curve. The maximum closed strain of the structural plane has a more significant effect on the mechanical properties of backfill. In the Weibull distribution, with the increase of the parameter m, the peak strength of backfill gradually increases and then reaches to a certain value, and the stress-strain curve gradually becomes steeper, which shows that m is a reflection of the concentration level of micro-unit strength distribution in the backfill..

scholarly journals Effect of Nanopores on Mechanical Properties of the Shape Memory Alloy

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 529
Author(s):  
Chunzhi Du ◽  
Zhifan Li ◽  
Bingfei Liu
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Shape Memory ◽  
Young’S Modulus ◽  
Residual Strain ◽  
Surface Effect ◽  
Young's Modulus ◽  
Strain Curve ◽  
Stress Strain ◽  
Strength Limit

Nanoporous Shape Memory Alloys (SMA) are widely used in aerospace, military industry, medical and health and other fields. More and more attention has been paid to its mechanical properties. In particular, when the size of the pores is reduced to the nanometer level, the effect of the surface effect of the nanoporous material on the mechanical properties of the SMA will increase sharply, and the residual strain of the SMA material will change with the nanoporosity. In this work, the expression of Young’s modulus of nanopore SMA considering surface effects is first derived, which is a function of nanoporosity and nanopore size. Based on the obtained Young’s modulus, a constitutive model of nanoporous SMA considering residual strain is established. Then, the stress–strain curve of dense SMA based on the new constitutive model is drawn by numerical method. The results are in good agreement with the simulation results in the published literature. Finally, the stress-strain curves of SMA with different nanoporosities are drawn, and it is concluded that the Young’s modulus and strength limit decrease with the increase of nanoporosity.

scholarly journals Analysis of Three-Dimensional Damage Constitutive Model of Frozen Sand Based on the Influence of Intermediate Principal Stress and Temperature

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Shilong Ma ◽  
Zhaoming Yao ◽  
Shuang Liu ◽  
Xuan Pan
Keyword(s):  
Constitutive Model ◽  
Weibull Distribution ◽  
Principal Stress ◽  
Three Dimensional ◽  
Intermediate Principal Stress ◽  
Frozen Soil ◽  
Stress Coefficient ◽  
Frozen Sand ◽  
Distribution Parameters ◽  
Damage Constitutive Model

To study the mechanical properties of frozen soil, it is necessary to understand the damage characteristics of frozen soil. Four types of three-dimensional indoor tests of frozen sand were carried out at −5°C, −10°C, and −15°C to study the mechanical damage properties. These include different stress path tests with the principal stress coefficients of 0, 0.25, 0.5, and 0.75 while analyzing the entire failure process. First, the three-dimensional compression test of frozen sand was studied to analyze the influence of temperature and intermediate principal stress coefficient on the large principal stress of frozen soil. The damage cost of frozen sand under the influence of different temperatures and intermediate principal stress coefficients was also established. Second, using the characteristics of discreteness and randomness of the distribution of the microelements inside the frozen soil and assuming that the failure of the microelement of the frozen soil obeys the Weibull distribution, the Drucker–Prager strength criterion was used as the statistical distribution variable of the microelement of the frozen soil based on the strain equivalence hypothesis, statistical theory, and continuous damage mechanics. This allows for a constitutive model of frozen sand damage under the three-dimensional stress state to be established. Finally, the model parameter values through low-temperature three-dimensional test data were able to be determined. This model allows for the physical meaning of Weibull distribution parameters F0 and m to be analyzed, and the distribution parameters with temperature and intermediate principal stress coefficient can be modified to obtain a modified frozen sand damage constitutive model. The results show that the modified damage constitutive model can simulate the entire process curve of the large principal stress-strain of frozen sand. It shows that the large principal stress of frozen sand increases with the increase of temperature and intermediate principal stress coefficient. Concurrently, the frozen sand damage constitutive model proposed in this paper can describe the deformation behavior of frozen soil under different temperature and stress paths and can be adapted to various other sediment types.

scholarly journals A Thermal Damage Constitutive Model for Oil Shale Based on Weibull Statistical Theory

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Guijie Zhao ◽  
Chen Chen ◽  
Huan Yan
Keyword(s):  
High Temperature ◽  
Constitutive Model ◽  
Oil Shale ◽  
Thermal Damage ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Practical Significance ◽  
Compression Tests ◽  
Different Temperatures ◽  
Damage Constitutive Model

In this work, we first studied the thermal damage to typical rocks, assuming that the strength of thermally damaged rock microelements obeys a Weibull distribution and considering the influence of temperature on rock mechanical parameters; under the condition that microelement failure conforms to the Drucker–Prager criterion, the statistical thermal damage constitutive model of rocks after high-temperature exposure was established. On this basis, conventional triaxial compression tests were carried out on oil shale specimens heated to different temperatures, and according to the results of these tests, the relationship between the temperature and parameters in the statistical thermal damage constitutive model was determined, and the thermal damage constitutive model for oil shale was established. The results show that the thermal damage in oil shale increases with the increase of temperature; the damage variable is largest at 700°C, reaching 0.636; from room temperature to 700°C, the elastic modulus and Poisson’s ratio decrease by 62.66% and 64.57%, respectively; the theoretical stress-strain curve obtained from the model is in good agreement with the measured curves; the maximum difference between the two curves before peak strength is only 5 × 10−4; the model accurately reflects the deformation characteristics of oil shale at high temperature. The research results are of practical significance to the underground in situ thermal processing of oil shale.

Study on Non-Local Damage Constitutive Model of Concrete under Freeze-Thaw Action

2010 ◽  
Vol 452-453 ◽  
pp. 133-136 ◽  
Author(s):  
Zong Min Liu ◽  
Ji Ze Mao ◽  
Hai Yan Song
Keyword(s):  
Constitutive Model ◽  
Internal State ◽  
Constitutive Relations ◽  
Irreversible Thermodynamics ◽  
Local Damage ◽  
Variable Theory ◽  
Freeze Thaw ◽  
Adjacent Point ◽  
Damage Constitutive Model ◽  
Non Local

Concrete is multi-phase composites. Due to the inhomogeneity of mechanical properties and complexity of physical properties, constitutive relations of concrete are more complicated. Starting from irreversible thermodynamics theory, internal state variable theory and nonlocal field theory, non-local damage constitutive model of concrete under freeze-thaw action is established in this paper. In the model, non-local influence functions are discussed which are used to describe interplay of damage between adjacent point.

Experimental Research on the Stress - Strain Curve of Regional Confined Concrete under Single Axial Press

2014 ◽  
Vol 584-586 ◽  
pp. 1289-1292
Author(s):  
Guo Liang Zhu
Keyword(s):  
Mechanical Properties ◽  
Theoretical Analysis ◽  
Constitutive Model ◽  
Theoretical Basis ◽  
Strain Curve ◽  
Confined Concrete ◽  
Constitutive Relationship ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Relationship Of

Regional confined concrete is base on confined concrete. It is the theory and application of a new attempt and development on confined concrete. To apply it to the actual project, we need to research mechanical properties and establish constitutive relationship of regional confined concrete. According to the research, we had carried on a series of tests, founded the stress-strain constitutive model of regional confined concrete under single axial press. The accuracy of theoretical analysis were more fully verified , and a theoretical basis for the application was provided.

scholarly journals Physical and Mechanical Properties Evolution of Coal Subjected to Salty Solution and a Damage Constitutive Model under Uniaxial Compression

Mathematics ◽  
2021 ◽  
Vol 9 (24) ◽  
pp. 3264
Author(s):  
Min Wang ◽  
Qifeng Guo ◽  
Yakun Tian ◽  
Bing Dai
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Uniaxial Compression ◽  
Immersion Time ◽  
Physical And Mechanical Properties ◽  
Relative Mass ◽  
Stress Strain ◽  
Damage Constitutive Model ◽  
Underground Reservoirs

Many underground reservoirs for storing water have been constructed in China’s western coal mines to protect water resources. Coal pillars which work as dams are subjected to a long-term soaking environment of concentrated salty water. Deterioration of the coal dam under the attack of the salty solution poses challenges for the long-term stability and serviceability of underground reservoirs. The evolution of the physical and mechanical properties of coal subjected to salty solutions are investigated in this paper. Coal from a western China mine is made to standard cylinder samples. The salty solution is prepared according to chemical tests of water in the mine. The coal samples soaked in the salty solution for different periods are tested by scanning electron microscope, nuclear magnetic resonance, and ultrasonic detector techniques. Further, uniaxial compression tests are carried out on the coal specimens. The evolutions of porosity, mass, microstructures of coal, solution pH values, and stress–strain curves are obtained for different soaking times. Moreover, a damage constitutive model for the coal samples is developed by introducing a chemical-stress coupling damage variable. The result shows that the corrosion effect of salty solution on coal samples becomes stronger with increasing immersion time. The degree of deterioration of the longitudinal wave velocity (vp) is positively correlated with the immersion time. With the increase in soaking times, the porosity of coal gradually increases. The relative mass firstly displays an increasing trend and then decreases with time. The peak strength and elastic modulus of coal decreases exponentially with soaking times. The developed damage constitutive model can well describe the stress–strain behavior of coal subjected to salty solution under the uniaxial compression.

Sign in / Sign up

Export Citation Format

Share Document