scholarly journals Experimental and Numerical Studies on Permeability Properties of Thermal Damaged Red Sandstone under Different Confining Pressures

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Zhenlong Zhao ◽  
Hongwen Jing ◽  
Guangping Fu ◽  
Qian Yin ◽  
Xinshuai Shi ◽  
...  
Keyword(s):  
Numerical Modeling ◽  
High Temperature ◽  
Pore Water ◽  
Permeability Coefficient ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Darcy's Law ◽  
Equivalent Permeability ◽  
Red Sandstone ◽  
Confining Pressures

The stability and safety of underground rock mass engineering are closely related to the permeability process of fluids and permeability properties of rocks. To reveal the flow behavior of fluid in thermal damaged rock, first, a rock seepage testing system was applied to study the permeability properties of red sandstone specimens after different high-temperature treatments from 200 to 800°C under different confining pressures of 10 to 30 MPa. Meanwhile, the microstructures of the red sandstone specimens were characterized by the mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). Then, the permeability process of pore water pressure and the flow form of fluid also were investigated by the numerical modeling method. The results show that the permeability properties of red sandstone specimens after high-temperature exposure follow linear Darcy’s law, and the relation between confining pressures and equivalent permeability coefficient ( K 0   ) can be described by a power function. Besides, the phenomenon that microscopic structural deterioration is intensified with increasing temperature and the average pore size and porosity of the red sandstone specimens are both power functions is related to the equivalent permeability coefficient. Furthermore, the results of numerical modeling indicated that the flow field within the range affected by confining pressures gradually becomes stable and orderly from disorder, and flow lines of the fluid become smooth and straight, and perpendicular to the isosurface of pore water pressure as time goes by. Moreover, the nonlinear correlation between pore water pressure and seepage path length changes to a linear correlation, which is consistent with linear Darcy’s law.

scholarly journals Effect of Colluvial Soil Slope Fracture’s Anisotropy Characteristics on Rainwater Infiltration Process

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Ling Zeng ◽  
Jie Liu ◽  
Jun-hui Zhang ◽  
Han-bing Bian ◽  
Wei-hua Lu
Keyword(s):  
Pore Water ◽  
Permeability Coefficient ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Positive Pressure ◽  
Saturated Zone ◽  
Infiltration Depth ◽  
Infiltration Process ◽  
Fracture Angle ◽  
Rainwater Infiltration

The SEEP/W module of finite element software GEO-slope is used to analyze the effects of fracture depth, permeability coefficient ratio, fracture angle, and fracture number on the rainwater infiltration process. Moreover, the effect of fracture seepage anisotropy on slope stability is discussed combining with unsaturated seepage theory. The results show that the pore water pressure in the fracture increases rapidly with the rainfall until it changes from negative pressure to positive pressure. The greater the fracture depth is, the greater the pore water pressure in the fracture is, and the greater the infiltration depth at the time of rainfall stopping is. When the permeability coefficient is greater than the rainfall intensity, the permeability coefficient ratio has a great influence on the infiltration process of rainwater. The smaller the fracture angle is, the greater the maximum pore water pressure is in the fracture depth range, and the greater the depth of the positive pore water pressure is. However, with the increase of fracture angle, the infiltration depth decreases, and the range of the surface saturation area of slope increases obviously. With the increase of fracture density, the saturated positive pressure region is connected to each other in the slope. The influence range and the degree of the rainwater on the seepage field are larger and larger. There is a power relation between the saturation area and the fracture number, and also the concentration distribution of long fractures directly forms the large-connected saturated zone and raises groundwater. The range of the saturated zone and variation law of the pore water pressure under fracture seepage are obtained, which provide a reference for the parameter partition assignment of slope stability analysis under fracture seepage.

Numerical Analysis of Characteristics of Moisture Migration in Soil Slope under Rainfall

2014 ◽  
Vol 501-504 ◽  
pp. 1927-1931
Author(s):  
Guang Ju Wen ◽  
Wen Jie Deng ◽  
Feng Wen
Keyword(s):  
Pore Water ◽  
Permeability Coefficient ◽  
Slope Failure ◽  
Pore Water Pressure ◽  
Soil Mechanics ◽  
Water Pressure ◽  
Point Of View ◽  
Moisture Migration ◽  
Unsaturated Soil Mechanics ◽  
Nonlinear Distribution

Based on the characteristics of slope failure induced by rainfall, from the point of view of moisture migration and combining unsaturated soil mechanics, the characteristics of moisture migration in slope under different rainfall intensities were analyzed by finite element method. The results reveal that under rainfall, the pore water pressure in slope is in layered distribution, and at the bottom of slope, the pore water pressure is the highest, the top is lower and the middle is the lowest. The volumetric water content is in nonlinear distribution and the degree of nonlinear in unsaturated area is higher than that of the saturated area. The permeability coefficient of soil rises with the increase of rainfall intensity, and when the soil is saturated, its permeability coefficient is saturate permeability coefficient.

scholarly journals Laboratory Experiment and Numerical Analysis on the Precursory Hydraulic Process of Rainfall-Induced Slope Failure

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Joon-Young Park ◽  
Young-Suk Song
Keyword(s):  
Numerical Modeling ◽  
Laboratory Test ◽  
Water Content ◽  
Pore Water ◽  
Slope Failure ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Volumetric Water Content ◽  
Wetting Front ◽  
Artificial Rainfall

A combined analysis involving a laboratory test and numerical modeling was performed to investigate the hydraulic processes leading to slope failure during rainfall. Through a laboratory landslide test in which artificial rainfall was applied to a homogeneous sandy slope, the timing and configurations of multiple slides were identified. In addition, volumetric water content was measured in real time through the use of monitoring sensors. The measured volumetric water content data were then used to validate the relevance of the numerical modeling results. The validated numerical modeling of the laboratory-scale slope failures provided insight into the hydraulic conditions that trigger landslides. According to the numerical modeling results, the miniaturized slope in the laboratory test was saturated in a manner so that the wetting front initially progresses downward and then the accumulated rainwater at the toe of the slope creates a water table that advances toward the crest. Furthermore, each of the five sequential failures that occurred during this experiment created slip surfaces where the pore-water pressure had achieved full saturation and an excessive pore-water pressure state. The findings of this study are expected to help understand the hydraulic prerequisites of landslide phenomena.

Influence of Water Saturation on Dynamic Responses of a Partially Sealed Tunnel

2012 ◽  
Vol 204-208 ◽  
pp. 1510-1513
Author(s):  
Min Jie Wen ◽  
Zi Ping Su
Keyword(s):  
Pore Water ◽  
Permeability Coefficient ◽  
Water Saturation ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Great Influence ◽  
Dynamic Responses ◽  
Harmonic Load ◽  
Homogeneous Fluid ◽  
Influence Of Water

The mixture of water and gas is treated as a homogeneous fluid. Based on Boit’s theory, the influences of water saturation on the dynamic responses of a partially sealed tunnel are investigated in the frequency domain. By utilizing the continuous condition, the analytical solutions of the displacement, stress and pore water pressure of a partially sealed tunnel in the nearly saturated soil are derived subject to the harmonic load. On this basis, the influences of water saturation and permeability coefficient on the system responses are discussed by the numerical example. It is shown that the water saturation has a great influence on the stress and pore water pressure amplitudes. In addition, the permeability in the boundary of the tunnel is reasonably described by the permeability coefficient.

The Analysis of Soil Slope Transient Seepage Consider the Change of Permeability Coefficient in Rainfall Condition

2012 ◽  
Vol 446-449 ◽  
pp. 1888-1892
Author(s):  
Zhong Ming He ◽  
Yan Qi Qin ◽  
Zhong Xin Cai
Keyword(s):  
Pore Water ◽  
Permeability Coefficient ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Rainfall Infiltration ◽  
Water Infiltration ◽  
Soil Slope ◽  
Seepage Field ◽  
Finite Element Software ◽  
Transient Seepage

In order to study the transient seepage field of soil slope when the saturated permeability coefficient changes under rainfall infiltration condition, the finite element software is used to build the numerical analysis model, the influence of slope seepage field and pore water pressure caused by the change of saturated permeability coefficient are emphatically discussed. The results show, under the condition of the certain sustained rainfall strength and rainfall duration, the rain water infiltration rate and infiltration depth are proportional to slope soil saturation permeability coefficient; Pore water pressure along the elevation direction shows the characteristic of “two big heads, among small” under the influence of rainfall infiltration.

scholarly journals NUMERICAL MODELING OF UNSATURATED LAYERED SOIL FOR RAINFALL-INDUCED SHALLOW LANDSLIDES

2017 ◽  
Vol 25 (4) ◽  
pp. 329-341 ◽  
Author(s):  
Chih-Yu LIU ◽  
Cheng-Yu KU ◽  
Jing-En XIAO ◽  
Chi-Chao HUANG ◽  
Shih-Meng HSU
Keyword(s):  
Numerical Modeling ◽  
Slope Stability ◽  
Pore Water ◽  
Numerical Solutions ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Characteristic Curve ◽  
Shallow Landslides ◽  
Layered Soil ◽  
Richards Equation

In this paper, a pioneer study on numerical modeling of rainfall-induced shallow landslides in unsaturated layered soil using the variably saturated flow equation is presented. To model the shallow landslides, the infinite slope stability analysis coupled with the hydrological model with the consideration of the fluctuation of time-dependent pore water pressure and Gardner equation for soil water characteristic curve was developed. A linearization process for the nonlinear Richards equation to deal with groundwater flow in unsaturated layered soil is derived using the Gardner model. To solve one-dimensional flow in the unsaturated zone of layered soil profiles, flux conservation and the continuity of pressure potential at the interface between two consecutive layers are considered in the numerical discretization of the finite difference method. The validity of the proposed model is established in three numerical problems by comparing the results with the analytical and other numerical solutions. Application examples have also been conducted. Obtained results demonstrate that the fluctuation of pore water pressure in unsaturated layered soil dominates slope stability of landslides and the lowest factor of safety may occur at the interface between two consecutive layers. The findings observed in this study are a fundamental contribution to environmental protection engineering for landslides in areas with higher occurrence and vulnerability to extreme precipitation.

scholarly journals Undrained monotonic and cyclic shear response and particle crushing of silica sand at low and high pressures

2017 ◽  
Vol 54 (2) ◽  
pp. 207-218 ◽  
Author(s):  
Masayuki Hyodo ◽  
Yang Wu ◽  
Noritaka Aramaki ◽  
Yukio Nakata
Keyword(s):  
Pore Water ◽  
Stress Ratio ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Confining Pressure ◽  
Cyclic Stress ◽  
Silica Sand ◽  
Particle Crushing ◽  
Cyclic Stress Ratio ◽  
Confining Pressures

A series of undrained monotonic and cyclic triaxial tests were performed on silica sand at two initial densities and different confining pressures from 0.1 to 5 MPa to investigate their shear response and crushing behaviour. The influence of particle crushing on the undrained shear strength and pore-water pressure was examined. To clarify the evolution of particle crushing, undrained monotonic and cyclic tests were terminated at several distinctive stages and sieving analysis tests were subsequently performed on the tested specimens. In the undrained monotonic test, specimens exhibited remarkable dilation behaviour and experienced no apparent particle crushing at low confining pressures. An increase in the mean stress suppressed the dilatancy due to a faster increase of the pore-water pressure, giving rise to the occurrence of particle crushing. In the undrained cyclic test, a higher confining pressure and cyclic stress ratio resulted in a much higher relative breakage. At a specific cyclic stress ratio, the relative breakage increased as the cyclic loading progressed. The confining pressure and shear strain amplitude played a significant role in controlling the evolution of particle breakage. The correlation between the relative breakage and plastic work for specimens under isotropic consolidation, undrained monotonic, and cyclic loadings has been validated experimentally.

TIME TO THE END OF PRIMARY CONSOLIDATION (EOP) OF SOFT CLAYEY SOILS: CONCERNING THE EFFECT OF ATTERBERG’S LIMIT AND CYCLIC LOADING HISTORY

2019 ◽  
Vol 128 (2B) ◽  
pp. 29-41
Author(s):  
Trần Thanh Nhàn
Keyword(s):  
Cyclic Loading ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Clayey Soils ◽  
Loading History ◽  
Cyclic Shear ◽  
Wide Range ◽  
Primary Consolidation ◽  
Time Required

In order to observe the end of primary consolidation (EOP) of cohesive soils with and without subjecting to cyclic loading, reconstituted specimens of clayey soils at various Atterberg’s limits were used for oedometer test at different loading increments and undrained cyclic shear test followed by drainage with various cyclic shear directions and a wide range of shear strain amplitudes. The pore water pressure and settlement of the soils were measured with time and the time to EOP was then determined by different methods. It is shown from observed results that the time to EOP determined by 3-t method agrees well with the time required for full dissipation of the pore water pressure and being considerably larger than those determined by Log Time method. These observations were then further evaluated in connection with effects of the Atterberg’s limit and the cyclic loading history.

Sign in / Sign up

Export Citation Format

Share Document