scholarly journals Performance Research of Materials and Engineering Application of Overburden Strata Separation-Zone Grouting Technology

2022 ◽  
Vol 2022 ◽  
pp. 1-17
Author(s):  
Wanpeng Huang ◽  
Huanyu Li ◽  
Gang Sun ◽  
Donghai Jiang ◽  
Yanfa Gao
Keyword(s):  
Separation Zone ◽  
Ground Surface ◽  
Ground Subsidence ◽  
Mining District ◽  
High Concentration ◽  
Thick Coal Seam ◽  
Seam Mining ◽  
Full Height ◽  
Overburden Strata ◽  
Overlying Strata

To solve the ground subsidence problem associated with thick coal seam mining under the railway in the Tangshan Mine, the technology of overburden strata separation-zone grouting (OSSG) was proposed. Based on the analysis of the full height overlying strata structure in the range of the six working face areas of the second mining district, the spatial distribution characteristics of the separation zone within the overlying strata are obtained after fully mining the six working faces. Then, emphasis was placed on the selection ratio of grouting materials and the hydrodynamic properties of different grout types, and grouting grout with a high concentration, slow precipitation rate, and good stability was obtained by taking fly ash and local clay as aggregates. The designed grout concentration was approximately 40%; the bulk density was approximately 1.20; and the clay content in the aggregates was approximately 40–50%. The separation-zone grouting plan was designed for the six working faces, and continuous grouting technology with the characteristics of multiple separation zones within the full-height section with a large flow and a high concentration was proposed to form a complete grouting system and reasonable grouting process. After engineering verification, the technology has an ash injection ratio of 24.2%, a grouting ratio of 100.3%, and a reduction in the ground subsidence ratio of 51.5%, effectively reducing mining damage to the ground surface and ensuring the safe operation of ground surface railways. Simultaneously, this advancement improves the resource recovery rate of coal mines and provides greater benefits for mining enterprises.

The Seepage Risk Analysis of Surface Runoff Caused by the Shallow Thick Coal Seam Mining

2012 ◽  
Vol 170-173 ◽  
pp. 1353-1358
Author(s):  
Shun Feng Zhang ◽  
Rui Lin Hu ◽  
Xiong Wu
Keyword(s):  
Coal Seam ◽  
Surface Runoff ◽  
Ground Deformation ◽  
Ground Subsidence ◽  
Water Drainage ◽  
Thick Coal Seam ◽  
Mine Area ◽  
Fractured Zone ◽  
Seam Mining ◽  
Overlying Strata

As for shallow thick coal seam, the overlying strata can not form steady structure and will break down until reach the surface ground, which will induced large ground deformation and fractures in the overlying strata during the mining. Under the condition of strong rainfall, surface runoff will influx to the collapse pit or supply to other aquifers, and inrush into the roadway through water flowing fractured zone. This paper takes the 4201、4301、4302、4303 and 4401 coal faces of JingDong mine area in PingShuo for example, predicts the range of ground subsidence、settlement and the height of water flowing fractured zone dynamically after coal face mining, with the Flac3D numerical modeling software. On the base of result above and combined with geomorphic characteristics and hydrologic geology of the mine area, the author analyses risk of surface runoff seepage and put forward a dynamic water drainage design to prevent mine water bursting, which offers scientific foundation and data for safety production of the mine .

Study on the Structure Characteristics and Ground Pressure Behavior of Overlying Strata with Shallow Buried Coal Seam

2011 ◽  
Vol 255-260 ◽  
pp. 3780-3785 ◽  
Author(s):  
Lei Yu ◽  
Zhi Zhong Fan ◽  
Gang Xu
Keyword(s):  
Coal Seam ◽  
Ground Subsidence ◽  
Mine Pressure ◽  
Structure Characteristics ◽  
Pressure Behavior ◽  
Ground Pressure ◽  
Working Face ◽  
Periodic Pressure ◽  
Seam Mining ◽  
Overlying Strata

The mine pressure behavior characters of shallow buried coal seam differed from both shallow seam mining and general depth seam. Mine pressure observation and numerical analysis were applied to research mine pressure behavior laws in fully mechanized face of shallow buried coal seam with thick bedrock and thin alluvium. It showed that the ground subsidence level phenomenon did not appear obviously although with obvious dynamic loading of fully mechanized face during the pressure period. The appearance was due to non-synchronized fracture from two key layers in the overlying rock layers and their interaction, which leaded to roof breaking initially and caving rocks with the form of an arch. Due to the periodic breaking and caving characteristics appearing as fully cut-down and arch alternately, the periodic pressure of shallow buried coal seam face showed as different size. The conclusion could be a reference for similar working face control.

Analysis of Three-Dimensional Numerical Simulationin Rlue of the Migration Rule of Overlying Strata in Thick Seam Mining with Soft of Daping Mine

2013 ◽  
Vol 718-720 ◽  
pp. 1934-1937
Author(s):  
Meng Lin Xu ◽  
De Shen Zhao
Keyword(s):  
Theoretical Analysis ◽  
Coal Seam ◽  
Three Dimensional ◽  
Fissure Zone ◽  
Thick Coal Seam ◽  
Thick Seam ◽  
Soft Coal ◽  
Soft Coal Seam ◽  
Seam Mining ◽  
Overlying Strata

In order to delve better what research methodology of height of water conducted fissure zone are, especially in mining of thick coal seam with soft, 3-D numerical simulationin was used to S2S9 face of Da Ping mine, it reveals the damage movement rule of overlying strata in mining roof-coal in "Three Soft" coal seam in the end . Thus it confirms the height of the water flowing fractured zone and tests the simulation result by the theoretical analysis and simple hydrology observation result. it provides a new idea for the application soft overburden in extra- thick seam mining technology.

scholarly journals Ground Fracture Development and Surface Fracture Evolution in N00 Method Shallowly Buried Thick Coal Seam Mining in an Arid Windy and Sandy Area: A Case Study of the Ningtiaota Mine (China)

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7712
Author(s):  
Yaokun Fu ◽  
Jianxuan Shang ◽  
Zhenqi Hu ◽  
Pengyu Li ◽  
Kun Yang ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Mining Area ◽  
Ground Subsidence ◽  
Deformation Pattern ◽  
Self Healing ◽  
Thick Coal Seam ◽  
Mining Areas ◽  
Working Face ◽  
Fracture Development ◽  
Seam Mining

An observatory was established at the Ningtiaota Mine (China) in order to investigate the surface deformation pattern of N00 method workings mining in shallow buried thick coal seams in a windy-sand area. The observatory allows one to measure the coupling between the periodic changes of parameters related to ground subsidence and ground cracks with workings advancement. The data monitored in the field indicate that when the adjacent mining workings are mined below the ground, a sinkhole basin with a larger impact area will be formed. New ground fractures are formed above the mining area to connect with the fractures above the mining face. As a consequence a new pattern of “O” circle distribution beyond the working face is formed, which develops rapidly during the working face recovery. In addition, the dynamic fractures in coal mining are characterized by the phenomenon of self-healing. Our findings will help to protect the surface environment of the mine area during shallow buried high-intensity mining activities in the Lime Tower coal mine, and are also an important guideline in other windy beach mining areas.

scholarly journals Subsidence Prediction of Overburden Strata and Ground Surface in Shallow Coal Seam Mining

2021 ◽  
Author(s):  
Jian Cao ◽  
Qingxiang Huang ◽  
Lingfei Guo
Keyword(s):  
Coal Seam ◽  
Physical Simulation ◽  
Soil Layer ◽  
Ground Surface ◽  
In Situ Observation ◽  
Key Stratum ◽  
Shallow Coal Seam ◽  
Seam Mining ◽  
Overburden Strata

Abstract Shallow coal seam with thick soil layer is widely reserved in the Jurassic Coalfield, Western China, mining-induced subsidence represents complex characteristics. Combining with physical simulation, theoretical analysis and in-situ observation, the overburden strata structure in dip direction were revealed, and the subsidence prediction models were established, based on this, the subsidence equations of overburden strata and ground surface were proposed. The results show that after shallow coal seam mining, based on the subsidence and movement characteristics, the overburden strata structure can be divided into three zones, which are "boundary pillar F-shape zone" (BPZ), "trapezoid goaf zone" (TGZ) and "coal pillar inverted trapezoidal zone" (CPZ). The subsidence of overburden strata depends on the key stratum, while the subsidence of soil layer depends on the bedrock subsidence basin, which is between the bedrock and thick soil layer. The bedrock subsidence is mainly related to mining height and bulking coefficient in TGZ, while it is mainly affected by mining height and distribution load on the key stratum in BPZ and CPZ. According to physical simulation and theoretical model, the maximum surface subsidence of No.1–2 seam mining in Ningtiaota coal mine are 1.1m and 1.07m respectively, which is basically consistence with the result of in-situ observation (1.2m).

scholarly journals Subsidence prediction of overburden strata and ground surface in shallow coal seam mining

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jian Cao ◽  
Qingxiang Huang ◽  
Lingfei Guo
Keyword(s):  
Coal Seam ◽  
Physical Simulation ◽  
Soil Layer ◽  
Ground Surface ◽  
In Situ Observation ◽  
Key Stratum ◽  
Shallow Coal Seam ◽  
Seam Mining ◽  
Overburden Strata

AbstractShallow coal seam with thick soil layer is widely reserved in the Jurassic Coalfield, Western China, mining-induced subsidence represents complex characteristics. Combining with physical simulation, theoretical analysis and in-situ observation, the overburden strata structure in dip direction were revealed, and the subsidence prediction models were established, based on this, the subsidence equations of overburden strata and ground surface were proposed. The results show that after shallow coal seam mining, based on the subsidence and movement characteristics, the overburden strata structure can be divided into three zones, which are "boundary pillar F-shape zone" (BPZ), "trapezoid goaf zone" (TGZ) and "coal pillar inverted trapezoidal zone" (CPZ). The subsidence of overburden strata depends on the key stratum, while the subsidence of soil layer depends on the bedrock subsidence basin, which is between the bedrock and thick soil layer. The bedrock subsidence is mainly related to mining height and bulking coefficient in TGZ, while it is mainly affected by mining height and distribution load on the key stratum in BPZ and CPZ. According to physical simulation and theoretical model, the maximum surface subsidence of No.1-2 seam mining in Ningtiaota coal mine are 1.1 m and 1.07 m respectively, which is basically consistence with the result of in-situ observation (1.2 m).

scholarly journals Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Shengrong Xie ◽  
Xiaoyu Wu ◽  
Dongdong Chen ◽  
Yaohui Sun ◽  
Junchao Zeng ◽  
...  
Keyword(s):  
Longwall Mining ◽  
Control Process ◽  
Coal Pillar ◽  
Main Roof ◽  
Control Effect ◽  
Mining Technology ◽  
Thick Coal Seam ◽  
Immediate Roof ◽  
Seam Mining ◽  
And Control

Automatic roadways on gob-side entry retaining with no-pillars are used for longwall mining technology. The mining technology with no-pillars can recover coal pillar resources and reduce the amount and cost of roadway excavations. Automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is adopted for the condition of thick immediate roof and medium-thick coal seam mining, cutting off the immediate roof and the main roof on the gob by combined support. The fractured roof forms gangue blocks to fill the gob and loads the overlying strata. The gangue control system is placed on the roadside, which controls the caving gangue to form a gangue rib. In this paper, the viewpoints and key technologies (the roof-cutting technology, the reinforcement and support technology, the gangue rib control technology, and the auxiliary support technology) of automatic roadway technology for cutting roofs by combined support on the gob-side entry retaining with no-pillars are introduced. Furthermore, the formation and control process are explained. The numerical simulation is used to simulate and analyze the roof hanging and the roof cutting structures. In addition, a field engineering test is performed. The field test shows that automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is feasible. This process uses construction techniques and technologies to meet on-site production needs. The combined support has high resistance strength and is shrinkable. In engineering applications, the combined support has a low damage rate. The deformation of the automatic roadway with gob-side entry retaining is small, and the control effect is significant.

Sign in / Sign up

Export Citation Format

Share Document