scholarly journals Statistical modeling and optimal energy distribution of cogeneration units by genetic algorithms

Author(s):  
Othmane Maakoul ◽  
Hamid El Omari ◽  
Aziza Abid

Our main objective is to evaluate the performance of a new method to optimize the energy management of a production system composed of six cogeneration units using artificial intelligence. The optimization criterion is economic and environmental in order to minimize the total fuel cost, as well as the reduction of polluting gas emissions such as COx, NOx and SOx. First, a statistical model has been developed to determine the power that the cogeneration units can provide. Then, an economic model of operation was developed: fuel consumption and pollutant gas emissions as a function of the power produced. Finally, we studied the energy optimization of the system using genetic algorithms (GA), and contribute to the research on improving the efficiency of the studied power system. The GA has a better optimization performance, it can easily choose satisfactory solutions according to the optimization objectives, and compensate for these defects using its own characteristics. These characteristics make GA have outstanding advantages in iterative optimization. The robustness of the proposed algorithm is validated by testing six cogeneration units, and the obtained simulation results of the proposed system prove the value and effectiveness of GA for efficiency improvement as well as operating cost minimization.

Author(s):  
Z.M. Yasin ◽  
N.F.A. Aziz ◽  
N.A. Salim ◽  
N.A. Wahab ◽  
N.A. Rahmat

In this paper, Multiobjective Cuckoo Search Algorithm (MOCSA) is developed to solve Economic Load Dispatch (ELD) problem. The main goal of the ELD is to meet the load demand at minimum operating cost by determining the output of the committed generating unit while satisfying system equality and inequality constraints. The problem formulation is based on a multiobjective model in which the multiobjective are defined as fuel cost minimization and carbon emission minimization. MOCSA is based on the inspiration from the brooding parasitism of cuckoo species in nature. Three cases are considered to test the effectiveness of the proposed technique which are fuel cost minimization, carbon emission minimization and multiobjective function with fixed weighted sum. The effectiveness of the MOCSA’s performances are illustrated through comparative study with other techniques such as Multiobjective Genetic Algorithm (MOGA) and Multiobjective Particle Swarm Optimization (MOPSO) in terms of fitness functions. The proposed study was conducted on three generating unit system at various loading condition. The result proved that MOCSA provide better solution in minimizing fuel cost and carbon emission usage as compared to other techniques.


Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 31 ◽  
Author(s):  
Umberto Abronzini ◽  
Ciro Attaianese ◽  
Matilde D’Arpino ◽  
Mauro Di Monaco ◽  
Giuseppe Tomasso

A Multi-Source Electric Vehicle Charging Station (MS-EVCS) is a local entity that combines the grid energy with Distributed Energy Resources (DERs) with the aim of reducing the grid impact due to electric vehicles (EVs) charging events. The integration of stationary and in-vehicle Energy Storage Systems (ESSs) in MS-EVCSs has gained increasing interest thanks to the possibility of storing energy at off-peak hours to be made available at peak-hours. However, the ESS technology and the vehicle-to-grid (V2G) concept show several issues due to cost, battery life cycle, reliability, and management. The design of the MS-EVCS energy management system is of primary importance to guarantee the optimal usage of the available resources and to enhance the system benefits. This study presents a novel energy management strategy for Real-Time (RT) control of MS-EVCS considering DERs, stationary ESS, and V2G. The proposed energy management control allows defining the MS-EVCS control policy solving several cascaded-problems with the aim of achieving the minimum operating cost when the battery degradation and the stochastic nature of the sources are considered. The key feature of the proposed methodology is the lower computational effort with respect to traditional optimal control methodologies while achieving the same optimal solution.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1060
Author(s):  
Md Mamun Ur Rashid ◽  
Majed A. Alotaibi ◽  
Abdul Hasib Chowdhury ◽  
Muaz Rahman ◽  
Md. Shafiul Alam ◽  
...  

From a residential point of view, home energy management (HEM) is an essential requirement in order to diminish peak demand and utility tariffs. The integration of renewable energy sources (RESs) together with battery energy storage systems (BESSs) and central battery storage system (CBSS) may promote energy and cost minimization. However, proper home appliance scheduling along with energy storage options is essential to significantly decrease the energy consumption profile and overall expenditure in real-time operation. This paper proposes a cost-effective HEM scheme in the microgrid framework to promote curtailing of energy usage and relevant utility tariff considering both energy storage and renewable sources integration. Usually, the household appliances have different runtime preferences and duration of operation based on user demand. This work considers a simulator designed in the C++ platform to address the domestic customer’s HEM issue based on usages priorities. The positive aspects of merging RESs, BESSs, and CBSSs with the proposed optimal power sharing algorithm (OPSA) are evaluated by considering three distinct case scenarios. Comprehensive analysis of each scenario considering the real-time scheduling of home appliances is conducted to substantiate the efficacy of the outlined energy and cost mitigation schemes. The results obtained demonstrate the effectiveness of the proposed algorithm to enable energy and cost savings up to 37.5% and 45% in comparison to the prevailing methodology.


2021 ◽  
Vol 22 (1) ◽  
pp. 85-100
Author(s):  
Suchitra Dayalan ◽  
Rajarajeswari Rathinam

Abstract Microgrid is an effective means of integrating multiple energy sources of distributed energy to improve the economy, stability and security of the energy systems. A typical microgrid consists of Renewable Energy Source (RES), Controllable Thermal Units (CTU), Energy Storage System (ESS), interruptible and uninterruptible loads. From the perspective of the generation, the microgrid should be operated at the minimum operating cost, whereas from the perspective of demand, the energy cost imposed on the consumer should be minimum. The main key in controlling the relationship of microgrid with the utility grid is managing the demand. An Energy Management System (EMS) is required to have real time control over the demand and the Distributed Energy Resources (DER). Demand Side Management (DSM) assesses the actual demand in the microgrid to integrate different energy resources distributed within the grid. With these motivations towards the operation of a microgrid and also to achieve the objective of minimizing the total expected operating cost, the DER schedules are optimized for meeting the loads. Demand Response (DR) a part of DSM is integrated with MG islanded mode operation by using Time of Use (TOU) and Real Time Pricing (RTP) procedures. Both TOU and RTP are used for shifting the controllable loads. RES is used for generator side cost reduction and load shifting using DR performs the load side control by reducing the peak to average ratio. Four different cases with and without the PV, wind uncertainties and ESS are analyzed with Demand Response and Unitcommittment (DRUC) strategy. The Strawberry (SBY) algorithm is used for obtaining the minimum operating cost and to achieve better energy management of the Microgrid.


Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2338
Author(s):  
Sofia Agostinelli ◽  
Fabrizio Cumo ◽  
Giambattista Guidi ◽  
Claudio Tomazzoli

The research explores the potential of digital-twin-based methods and approaches aimed at achieving an intelligent optimization and automation system for energy management of a residential district through the use of three-dimensional data model integrated with Internet of Things, artificial intelligence and machine learning. The case study is focused on Rinascimento III in Rome, an area consisting of 16 eight-floor buildings with 216 apartment units powered by 70% of self-renewable energy. The combined use of integrated dynamic analysis algorithms has allowed the evaluation of different scenarios of energy efficiency intervention aimed at achieving a virtuous energy management of the complex, keeping the actual internal comfort and climate conditions. Meanwhile, the objective is also to plan and deploy a cost-effective IT (information technology) infrastructure able to provide reliable data using edge-computing paradigm. Therefore, the developed methodology led to the evaluation of the effectiveness and efficiency of integrative systems for renewable energy production from solar energy necessary to raise the threshold of self-produced energy, meeting the nZEB (near zero energy buildings) requirements.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4398
Author(s):  
Yiqi Li ◽  
Jing Zhang ◽  
Zhoujun Ma ◽  
Yang Peng ◽  
Shuwen Zhao

With the development of integrated energy systems (IES), the traditional demand response technologies for single energy that do not take customer satisfaction into account have been unable to meet actual needs. Therefore, it is urgent to study the integrated demand response (IDR) technology for integrated energy, which considers consumers’ willingness to participate in IDR. This paper proposes an energy management optimization method for community IES based on user dominated demand side response (UDDSR). Firstly, the responsive power loads and thermal loads are modeled, and aggregated using UDDSR bidding optimization. Next, the community IES is modeled and an aggregated building thermal model is introduced to measure the temperature requirements of the entire community of users for heating. Then, a day-ahead scheduling model is proposed to realize the energy management optimization. Finally, a penalty mechanism is introduced to punish the participants causing imbalance response against the day-ahead IDR bids, and the conditional value-at-risk (CVaR) theory is introduced to enhance the robustness of the scheduling model under different prediction accuracies. The case study demonstrates that the proposed method can reduce the operating cost of the community under the premise of fully considering users’ willingness, and can complete the IDR request initiated by the power grid operator or the dispatching department.


Sign in / Sign up

Export Citation Format

Share Document