scholarly journals A Study on Obtaining Tree Data from Green Spaces in Parks Using Unmanned Aerial Vehicle Images: Focusing on Mureung Park in Chuncheon

2021 ◽  
Vol 24 (4) ◽  
pp. 441-450
Author(s):  
Do-Hyung Lee ◽  
Sung-Ho Kil ◽  
Su-Been Lee
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Field Survey ◽  
Tree Height ◽  
Green Spaces ◽  
Pinus Koraiensis ◽  
Surface Model ◽  
Average Height ◽  
Short Period ◽  
Aerial Vehicle ◽  
Uav Images

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 ㎡ and 14,897 ㎥, respectively, and the green coverage and volume measured through the field survey were 6,339 ㎡ and 17,167 ㎥. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

Retrieving individual tree heights from a point cloud generated with optical imagery from an unmanned aerial vehicle (UAV)

2020 ◽  
Vol 50 (10) ◽  
pp. 1012-1024
Author(s):  
Meimei Wang ◽  
Jiayuan Lin
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Point Cloud ◽  
Laser Scanning ◽  
Tree Height ◽  
Absolute Error ◽  
Coefficient Of Determination ◽  
Surface Model ◽  
Individual Tree ◽  
Aerial Vehicle ◽  
The Mean

Individual tree height (ITH) is one of the most important vertical structure parameters of a forest. Field measurement and laser scanning are very expensive for large forests. In this paper, we propose a cost-effective method to acquire ITHs in a forest using the optical overlapping images captured by an unmanned aerial vehicle (UAV). The data sets, including a point cloud, a digital surface model (DSM), and a digital orthorectified map (DOM), were produced from the UAV imagery. The canopy height model (CHM) was obtained by subtracting the digital elevation model (DEM) from the DSM removed of low vegetation. Object-based image analysis was used to extract individual tree crowns (ITCs) from the DOM, and ITHs were initially extracted by overlaying ITC outlines on the CHM. As the extracted ITHs were generally slightly shorter than the measured ITHs, a linear relationship was established between them. The final ITHs of the test site were retrieved by inputting extracted ITHs into the linear regression model. As a result, the coefficient of determination (R2), the root mean square error (RMSE), the mean absolute error (MAE), and the mean relative error (MRE) of the retrieved ITHs against the measured ITHs were 0.92, 1.08 m, 0.76 m, and 0.08, respectively.

scholarly journals Slope Mapping using Unmanned Aerial Vehicle (UAV)

2021 ◽  
Vol 12 (3) ◽  
pp. 1781-1789
Author(s):  
Muhammad Farhan Zolkepli Et.al
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cost Effective ◽  
Modern Method ◽  
Modern Technology ◽  
Surface Model ◽  
High Quality Image ◽  
Short Period ◽  
Aerial Vehicle ◽  
Normal Mapping ◽  
Digital Orthophoto

This paper discusses the applications of unmanned aerial vehicle (UAV) for slope mapping and also its important parameters including perimeter, area and also volume of certain selected area. With the development of modern technology, the utilization of UAV to gather data for slope mapping becoming easier as it is quick, reliable, precise, cost-effective and also easily to operate. Modern UAV able to take high quality image which essential for the effectiveness and nature of normal mapping output such as Digital Surface Model (DSM) and Digital Orthophoto. This photo captured by UAV will later transfer to commercial software to generate full map of study area. With the help of established software, the measurement of selected study areas can be determined easily which can be considered as the main interest in this study. In addition, another outcome of this study is, this modern method of mapping will be compare to traditional method of mapping which proven to be more effective in term of low costing, low time consuming, can gather huge amount of data within short period of time, low man power needed and almost no potential risk of hazardous effect to man.

Effectiveness of Unmanned Aerial Vehicle (UAV) for Digital Slope Mapping

2020 ◽  
Vol 7 (2) ◽  
pp. 119-136
Author(s):  
MOHD FAKHRURRAZI ISHAK ◽  
M.F. ZOLKEPLI ◽  
NURMUNIRA MUHAMMAD
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Traditional Method ◽  
Modern Method ◽  
Modern Technology ◽  
Surface Model ◽  
Short Period ◽  
Aerial Vehicle ◽  
Normal Mapping ◽  
Digital Orthophoto ◽  
Area And Volume

This paper discusses the applications of unmanned aerial vehicle (UAV) for slope mapping and its important parameters including perimeter, area and volume of certain selected areas. Modern UAV able to take high quality image which essential for the effectiveness and nature of normal mapping output such as Digital Surface Model (DSM) and Digital Orthophoto. This photo captured by UAV will later transfer to commercial software to generate full map of study area. Three locations in Kuantan Pahang are chosen (Sungai Lembing, Politeknik Sultan Ahmad Shah ‘POLISAS’ and Pahang Matriculation College) for slope mapping. With the help of established software, the measurement (perimeter, area and volume) of selected study areas can be determined easily and considered as the main interest in this study. In addition, another outcome of this study is, this modern method of mapping will be compare to traditional method of mapping which proven to be more effective in term of low costing, low time consuming, can gather huge amount of data within short period of time, low man power needed and almost no potential risk of hazardous effect to man. In conclusion, modern technology of UAV proves to be very effective for mapping in geotechnical engineering. Slope mapping help researchers and engineers to obtain slope measurement within short period of time compare to previous traditional method.

scholarly journals Estimating forest uniformity in Eucalyptus spp. and Pinus taeda L. stands using field measurements and structure from motion point clouds generated from unmanned aerial vehicle (UAV) data collection

2018 ◽  
Vol 27 (2) ◽  
pp. e005 ◽  
Author(s):  
Ângela M. K. Hentz ◽  
Carlos A. Silva ◽  
Ana P. Dalla Corte ◽  
Sylvio P. Netto ◽  
Michael P. Strager ◽  
...  
Keyword(s):  
Pinus Taeda ◽  
Unmanned Aerial Vehicle ◽  
Digital Terrain Model ◽  
Tree Height ◽  
Point Clouds ◽  
Forest Monitoring ◽  
Surface Model ◽  
3D Point Clouds ◽  
Aerial Vehicle ◽  
Pinus Taeda L

Aim of study: In this study we applied 3D point clouds generated by images obtained from an Unmanned Aerial Vehicle (UAV) to evaluate the uniformity of young forest stands.Area of study: Two commercial forest stands were selected, with two plots each. The forest species studied were Eucalyptus spp. and Pinus taeda L. and the trees had an age of 1.5 years.Material and methods: The individual trees were detected based on watershed segmentation and local maxima, using the spectral values stored in the point cloud. After the tree detection, the heights were calculated using two approaches, in the first one using the Digital Surface Model (DSM) and a Digital Terrain Model, and in the second using only the DSM. We used the UAV-derived heights to estimate an uniformity index.Main results: The trees were detected with a maximum 6% of error. However, the height was underestimated in all cases, in an average of 1 and 0.7 m for Pinus and Eucalyptus stands. We proposed to use the models built herein to estimate tree height, but the regression models did not explain the variably within the data satisfactorily. Therefore, the uniformity index calculated using the direct UAV-height values presented results close to the field inventory, reaching better results when using the second height approach (error ranging 2.8-7.8%).Research highlights: The uniformity index using the UAV-derived height from the proposed methods was close to the values obtained in field. We noted the potential for using UAV imagery in forest monitoring.

scholarly journals Phenotyping of Corn Plants Using Unmanned Aerial Vehicle (UAV) Images

2019 ◽  
Vol 11 (17) ◽  
pp. 2021 ◽  
Author(s):  
Wei Su ◽  
Mingzheng Zhang ◽  
Dahong Bian ◽  
Zhe Liu ◽  
Jianxi Huang ◽  
...  
Keyword(s):  
Plant Height ◽  
Unmanned Aerial Vehicle ◽  
Estimation Error ◽  
Surface Model ◽  
Lodging Resistance ◽  
Height Estimation ◽  
Area Estimation ◽  
Corn Breeding ◽  
Aerial Vehicle ◽  
Uav Images

Phenotyping provides important support for corn breeding. Unfortunately, the rapid detection of phenotypes has been the major limiting factor in estimating and predicting the outcomes of breeding programs. This study was focused on the potential of phenotyping to support corn breeding using unmanned aerial vehicle (UAV) images, aiming at mining and deepening UAV techniques for comparing phenotypes and screening new corn varieties. Two geometric traits (plant height, canopy leaf area index (LAI)) and one lodging resistance trait (lodging area) were estimated in this study. It was found that stereoscopic and photogrammetric methods were promising ways to calculate a digital surface model (DSM) for estimating corn plant height from UAV images, with R2 = 0.7833 (p < 0.001) and a root mean square error (RMSE) = 0.1677. In addition to a height estimation, the height variation was analyzed for depicting and validating the corn canopy uniformity stability for different varieties. For the lodging area estimation, the normalized DSM (nDSM) method was more promising than the gray-level co-occurrence matrix (GLCM) textural features method. The estimation error using the nDSM ranged from 0.8% to 5.3%, and the estimation error using the GLCM ranged from 10.0% to 16.2%. Associations between the height estimation and lodging area estimation were done to find the corn varieties with optimal plant heights and lodging resistance. For the LAI estimation, the physical radiative transfer PROSAIL model offered both an accurate and robust estimation performance both at the middle (R2 = 0.7490, RMSE = 0.3443) and later growing stages (R2 = 0.7450, RMSE = 0.3154). What was more exciting was that the estimated sequential time series LAIs revealed a corn variety with poor resistance to lodging in a study area of Baogaofeng Farm. Overall, UAVs appear to provide a promising method to support phenotyping for crop breeding, and the phenotyping of corn breeding in this study validated this application.

scholarly journals Monitoring the Damage of Armyworm in Summer Corn by Unmanned Aerial Vehicle Imaging

2020 ◽  
Author(s):  
mingzheng zhang ◽  
Xinsheng Wang ◽  
Jinghao Xue ◽  
Wei Su ◽  
Dehai Zhu ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Regional Scale ◽  
Support Vector ◽  
Surface Model ◽  
Automated Identification ◽  
Aerial Vehicle ◽  
Corn Plants ◽  
Uav Images ◽  
Uav Image ◽  
Sentinel 2

Abstract Background: Monitoring armyworm (Mythimna separata Walker) damage in crops requires timely, rapid and accurate observations to avoid severe yield losses. Results: The Random Forest (RF) classifier was more effective at automatically and accurately monitoring armyworm damage compared with Support Vector Machine (SVM), Multilayer Perceptron Classifier (MLPC) and Naive Bayes Classifier (NB) classifiers. Furthermore, the incorporation of an Unmanned Aerial Vehicle (UAV) image-generated digital surface model improved the performance of the RF classifier, increasing the F-score from 0.985 and 0.970 to 0.997 and 0.994, and increasing the Kappa coefficient from 0.955 to 0.990. In addition, we found that Band 3 (735 nm) of the UAV image and Band 6 (740 nm) of a coincident Sentinel-2 image were not sensitive to an armyworm infestation in this study. Conclusions: We developed an accurate algorithm for the automated identification of armyworm-damaged corn plants using UAV images at the field scale. The study also indicated the feasibility of the developed method for monitoring corn armyworm damage at regional scale when combined with Sentinel-2 images.

scholarly journals Identifying the Branch of Kiwifruit Based on Unmanned Aerial Vehicle (UAV) Images Using Deep Learning Method

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4442
Author(s):  
Zijie Niu ◽  
Juntao Deng ◽  
Xu Zhang ◽  
Jun Zhang ◽  
Shijia Pan ◽  
...  
Keyword(s):  
Deep Learning ◽  
Unmanned Aerial Vehicle ◽  
Semantic Segmentation ◽  
Dynamic Monitoring ◽  
Support Vector ◽  
Distribution Maps ◽  
Time Operation ◽  
Aerial Vehicle ◽  
Uav Images ◽  
Segmentation Image

It is important to obtain accurate information about kiwifruit vines to monitoring their physiological states and undertake precise orchard operations. However, because vines are small and cling to trellises, and have branches laying on the ground, numerous challenges exist in the acquisition of accurate data for kiwifruit vines. In this paper, a kiwifruit canopy distribution prediction model is proposed on the basis of low-altitude unmanned aerial vehicle (UAV) images and deep learning techniques. First, the location of the kiwifruit plants and vine distribution are extracted from high-precision images collected by UAV. The canopy gradient distribution maps with different noise reduction and distribution effects are generated by modifying the threshold and sampling size using the resampling normalization method. The results showed that the accuracies of the vine segmentation using PSPnet, support vector machine, and random forest classification were 71.2%, 85.8%, and 75.26%, respectively. However, the segmentation image obtained using depth semantic segmentation had a higher signal-to-noise ratio and was closer to the real situation. The average intersection over union of the deep semantic segmentation was more than or equal to 80% in distribution maps, whereas, in traditional machine learning, the average intersection was between 20% and 60%. This indicates the proposed model can quickly extract the vine distribution and plant position, and is thus able to perform dynamic monitoring of orchards to provide real-time operation guidance.

scholarly journals Improved Accuracy of Riparian Zone Mapping Using Near Ground Unmanned Aerial Vehicle and Photogrammetry Method

2021 ◽  
Vol 13 (10) ◽  
pp. 1997
Author(s):  
Joan Grau ◽  
Kang Liang ◽  
Jae Ogilvie ◽  
Paul Arp ◽  
Sheng Li ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Precision Agriculture ◽  
Riparian Zone ◽  
Agricultural Landscapes ◽  
Agricultural Watershed ◽  
Riparian Zones ◽  
Surface Model ◽  
Low Resolution ◽  
Channel Network ◽  
Aerial Vehicle

In agriculture-dominant watersheds, riparian ecosystems provide a wide array of benefits such as reducing soil erosion, filtering chemical compounds, and retaining sediments. Traditionally, the boundaries of riparian zones could be estimated from Digital Elevation Models (DEMs) or field surveys. In this study, we used an Unmanned Aerial Vehicle (UAV) and photogrammetry method to map the boundaries of riparian zones. We first obtained the 3D digital surface model with a UAV. We applied the Vertical Distance to Channel Network (VDTCN) as a classifier to delineate the boundaries of the riparian area in an agricultural watershed. The same method was also used with a low-resolution DEM obtained with traditional photogrammetry and two more LiDAR-derived DEMs, and the results of different methods were compared. Results indicated that higher resolution UAV-derived DEM achieved a high agreement with the field-measured riparian zone. The accuracy achieved (Kappa Coefficient, KC = 63%) with the UAV-derived DEM was comparable with high-resolution LiDAR-derived DEMs and significantly higher than the prediction accuracy based on traditional low-resolution DEMs obtained with high altitude aerial photos (KC = 25%). We also found that the presence of a dense herbaceous layer on the ground could cause errors in riparian zone delineation with VDTCN for both low altitude UAV and LiDAR data. Nevertheless, the study indicated that using the VDTCN as a classifier combined with a UAV-derived DEM is a suitable approach for mapping riparian zones and can be used for precision agriculture and environmental protection over agricultural landscapes.

Sign in / Sign up

Export Citation Format

Share Document