Human Eye Pupil Detection System for Different IRIS Database Images

2021 ◽  
Vol 18 (4) ◽  
pp. 1239-1242
Author(s):  
N. Nandhagopal ◽  
S. Navaneethan ◽  
V. Nivedita ◽  
A. Parimala ◽  
Dinesh Valluru
Keyword(s):  
Near Infrared ◽  
Detection System ◽  
Recognition Rate ◽  
Vital Role ◽  
Center Of Gravity ◽  
Bright Spot ◽  
Threshold Method ◽  
Human Eye ◽  
Pupil Detection ◽  
Suppression Process

The pupil detection system plays a vital role in ophthalmology diagnosis equipments because pupil has a center place of human eye to locate the exact position. To identify the exact human eye pupil region in near infrared (NIR) images, this work proposes the Center of gravity method and its real time FPGA hardware implementation. The proposed work involves global threshold method to segment the pupil region from human eye and the bright spot suppression process removes the light reflections on the pupil due to the IR (Infra red) rays then the morphology dilation process removes unnecessary black pixels other than pupil region on the image. Finally, center of gravity (COG) method provides the exact pupil center coordinate and radius of the human eye. CASIA IRIS V4 and UBIRIS iris database images used in this work and achieved 90-95% of recognition rate.

An FPGA-Based Real-Time Human Eye Pupil Detection System Using E2V Smart Camera

2019 ◽  
Vol 16 (2) ◽  
pp. 649-654
Author(s):  
S. Navaneethan ◽  
N. Nandhagopal ◽  
V. Nivedita
Keyword(s):  
Real Time ◽  
Detection System ◽  
Detection Algorithm ◽  
Video Frame ◽  
Smart Camera ◽  
Verilog Hdl ◽  
Real Time System ◽  
Human Eye ◽  
Pupil Detection ◽  
Main Motive

Threshold based pupil detection algorithm was found tobe most efficient method to detect human eye. An implementation of a real-time system on an FPGA board to detect and track a human's eye is the main motive to obtain from proposed work. The Pupil detection algorithm involved thresholding and image filtering. The Pupil location was identified by computing the center value of the detected region. The proposed hardware architecture is designed using Verilog HDL and implemented on aAltera DE2 cyclone II FPGA for prototyping and logic utilizations are compared with Existing work. The overall setup included Cyclone II FPGA, a E2V camera, SDRAM and a VGA monitor. Experimental results proved the accuracy and effectiveness of the hardware realtime implementation as the algorithm was able to manage various types of input video frame. All calculation was performed in real time. Although the system can be furthered improved to obtain better results, overall the project was a success as it enabled any inputted eye to be accurately detected and tracked.

Strain-Multiplexing Optical-Tuning based on Single-Pulsed Holographic Nanostructures

Nanoscale ◽  
2021 ◽  
Author(s):  
Muhammad Waqas Khalid ◽  
Rajib Ahmed ◽  
Haider Butt
Keyword(s):  
Data Storage ◽  
Near Infrared ◽  
Vital Role

Holographic flexible and rigid-nanostructures in the visible to near infrared plays a vital role in various applications including display, data storage, imaging, and security. However, personalized use of holography is...

scholarly journals Ganoderma boninense Disease Detection by Near-Infrared Spectroscopy Classification: A Review

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3052
Author(s):  
Mas Ira Syafila Mohd Hilmi Tan ◽  
Mohd Faizal Jamlos ◽  
Ahmad Fairuz Omar ◽  
Fatimah Dzaharudin ◽  
Suramate Chalermwisutkul ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Early Detection ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Predictive Analytics ◽  
Detection System ◽  
Imaging Techniques ◽  
Ganoderma Boninense ◽  
Machine Learning Classification ◽  
Detection Techniques

Ganoderma boninense (G. boninense) infection reduces the productivity of oil palms and causes a serious threat to the palm oil industry. This catastrophic disease ultimately destroys the basal tissues of oil palm, causing the eventual death of the palm. Early detection of G. boninense is vital since there is no effective treatment to stop the continuing spread of the disease. This review describes past and future prospects of integrated research of near-infrared spectroscopy (NIRS), machine learning classification for predictive analytics and signal processing towards an early G. boninense detection system. This effort could reduce the cost of plantation management and avoid production losses. Remarkably, (i) spectroscopy techniques are more reliable than other detection techniques such as serological, molecular, biomarker-based sensor and imaging techniques in reactions with organic tissues, (ii) the NIR spectrum is more precise and sensitive to particular diseases, including G. boninense, compared to visible light and (iii) hand-held NIRS for in situ measurement is used to explore the efficacy of an early detection system in real time using ML classifier algorithms and a predictive analytics model. The non-destructive, environmentally friendly (no chemicals involved), mobile and sensitive leads the NIRS with ML and predictive analytics as a significant platform towards early detection of G. boninense in the future.

Hyperspectral imaging for the elimination of visual ambiguity in corrosion detection and identification of corrosion sources

2021 ◽  
pp. 147592172110416
Author(s):  
Dayakar N Lavadiya ◽  
Hizb Ullah Sajid ◽  
Ravi K Yellavajjala ◽  
Xin Sun
Keyword(s):  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Sulfate Solution ◽  
Vital Role ◽  
Mitigation Strategies ◽  
Svm Classifier ◽  
Corrosive Media ◽  
Detection And Identification ◽  
Coated Surfaces ◽  
Visual Ambiguity

The similarity in the hue of corroded surfaces and coated surfaces, dust, vegetation, etc. leads to visual ambiguity which is challenging to eliminate using existing image classification/segmentation techniques. Furthermore, existing methods lack the ability to identify the source of corrosion, which plays a vital role in framing the corrosion mitigation strategies. The goal of this study to employ hyperspectral imaging (1) to detect corroded surfaces under visually ambiguous scenarios and (2) identify the source of corrosion in such scenarios. To this end, three different corrosive media, namely, (1) 1M hydrochloric acid (HCl), 2) 3.5 wt.% sodium chloride solution (NaCl), and (3) 3 wt.% sodium sulfate solution (Na2SO4), are employed to generate chemically distinctive corroded surfaces. The hyperspectral imaging sensor is employed to obtain the visible and near infrared (VNIR) spectra (397 nm–1004 nm) reflected by the corroded/coated surfaces. The intensity of the reflectance in various spectral bands are considered as the descriptive features in this study, and the training and test datasets were generated consisting of 35,000 and 15,000 data points, respectively. SVM classifier is trained and then its efficacy on the test data is assessed. Furthermore, validation datasets are employed and the generalization ability of the trained SVM classifier is verified. The results from this study revealed that the SVM classifier achieved an overall accuracy of 94% with the misclassifications of 18% and 13% in the case of NaCl and Na2SO4 corrosion, respectively. Reflectance spectra obtained in the VNIR region was found to eliminate the visual ambiguity between the corroded and coated surfaces and, identify the source of corrosion accurately. Further, the range of key wavelengths of the spectra that play an important role in the distinguishability of coating and chemically distinctive corroded surface were identified to be 500–520 nm, 660–680 nm, 760–770 nm, and 830–850 nm.

scholarly journals Traffic Sign Detection Based on Convolutional Neural Network

2021 ◽  
Vol 9 (8) ◽  
pp. 2926-2934
Author(s):  
Arjun Dileep
Keyword(s):  
Recognition Rate ◽  
Vital Role ◽  
Motive Force ◽  
Image Process ◽  
Traffic Sign ◽  
The Road ◽  
Sign Detection ◽  
Help Systems ◽  
Traffic Sign Detection ◽  
Detection And Recognition

Abstract: In today's world, nearly everything we have a tendency to do has been simplified by machine-driven tasks. In a trial to specialize in the road whereas driving, drivers usually miss out on signs on the facet of the road, that can be dangerous for them and for the folks around them. This drawback may be avoided if there was AN economical thanks to inform the motive force while not having them to shift their focus. Traffic Sign Detection and Recognition (TSDR) plays a vital role here by detection and recognizing a symptom, therefore notifying the motive force of any coming signs. This not solely ensures road safety, however additionally permits the motive force to be at very little a lot of ease whereas driving on tough or new roads. Another normally long-faced drawback isn't having the ability to know the which means of the sign. With the assistance of this Advanced Driver help Systems (ADAS) application, drivers can not face the matter of understanding what the sign says. during this paper, we have a tendency to propose a way for Traffic Sign Detection and Recognition exploitation image process for the detection of a symptom and a Convolutional Neural Networks (CNN) for the popularity of the sign. CNNs have a high recognition rate, therefore creating it fascinating to use for implementing varied laptop vision tasks. TensorFlow is employed for the implementation of the CNN. Keywords: actitvity recognition; knowledge collection; knowledge preprocessing; coaching CNN model ;evaluating model; predicting the result.

scholarly journals A Low Cost Vision-Based Road-Following System for Mobile Robots

2018 ◽  
Vol 8 (9) ◽  
pp. 1635 ◽  
Author(s):  
Haojie Zhang ◽  
David Hernandez ◽  
Zhibao Su ◽  
Bo Su
Keyword(s):  
Mobile Robots ◽  
Unscented Kalman Filter ◽  
Detection System ◽  
Tracking System ◽  
Low Cost ◽  
Recognition Rate ◽  
Road Detection ◽  
The Road ◽  
Road Following ◽  
Following Error

Navigation is necessary for autonomous mobile robots that need to track the roads in outdoor environments. These functions could be achieved by fusing data from costly sensors, such as GPS/IMU, lasers and cameras. In this paper, we propose a novel method for road detection and road following without prior knowledge, which is more suitable with small single lane roads. The proposed system consists of a road detection system and road tracking system. A color-based road detector and a texture line detector are designed separately and fused to track the target in the road detection system. The top middle area of the road detection result is regarded as the road-following target and is delivered to the road tracking system for the robot. The road tracking system maps the tracking position in camera coordinates to position in world coordinates, which is used to calculate the control commands by the traditional tracking controllers. The robustness of the system is enhanced with the development of an Unscented Kalman Filter (UKF). The UKF estimates the best road borders from the measurement and presents a smooth road transition between frame to frame, especially in situations such as occlusion or discontinuous roads. The system is tested to achieve a recognition rate of about 98.7% under regular illumination conditions and with minimal road-following error within a variety of environments under various lighting conditions.

Survey of Unknown Malware Attack Finding

2018 ◽  
pp. 2227-2243
Author(s):  
Murugan Sethuraman Sethuraman
Keyword(s):  
Intrusion Detection ◽  
Intrusion Detection System ◽  
Detection System ◽  
Vital Role

Intrusion detection system(IDS) has played a vital role as a device to guard our networks from unknown malware attacks. However, since it still suffers from detecting an unknown attack, i.e., 0-day attack, the ultimate challenge in intrusion detection field is how we can precisely identify such an attack. This chapter will analyze the various unknown malware activities while networking, internet or remote connection. For identifying known malware various tools are available but that does not detect Unknown malware exactly. It will vary according to connectivity and using tools and finding strategies what they used. Anyhow like known Malware few of unknown malware listed according to their abnormal activities and changes in the system. In this chapter, we will see the various Unknown methods and avoiding preventions as birds eye view manner.

Sign in / Sign up

Export Citation Format

Share Document