Preparation of C60 Nanowhiskers-SnO2 Nanocomposites and Photocatalytic Degradation of Organic Dyes

2015 ◽  
Vol 15 (10) ◽  
pp. 8125-8132 ◽  
Author(s):  
Hae Soo Park ◽  
Weon Bae Ko
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Degradation ◽  
Electric Furnace ◽  
Brilliant Green ◽  
Organic Dyes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Gas Atmosphere ◽  
Chloride Pentahydrate

C60 nanowhiskers were prepared using a liquid–liquid interfacial precipitation (LLIP) method. Tin oxide (SnO2) nanoparticles were synthesized by a reaction of tin (IV) chloride pentahydrate with ammonium nitrate in an electric furnace. The C60 nanowhiskers-SnO2 nanocomposites were calcined in an electric furnace at 700 °C under an inert argon gas atmosphere for 2 h. The crystallinity, morphology and optical properties of the samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and UV-vis spectrophotometry. The photocatalytic activity of the C60 nanowhiskers-SnO2 nanocomposites in the degradation of the organic dyes, such as methylene blue, methyl orange, rhodamine B, and brilliant green, under ultraviolet light at 254 nm by UV-vis spectrophotometry was evaluated and compared with that of C60 nanowhiskers and SnO2 nanoparticles. The experimental results showed that C60 nanowhiskers-SnO2 nanocomposites exhibited remarkably higher photocatalytic degradation of organic dyes compared to C60 nanowhiskers and SnO2 nanoparticles.

scholarly journals Aegle marmelosMediated Green Synthesis of Different Nanostructured Metal Hexacyanoferrates: Activity against Photodegradation of Harmful Organic Dyes

Scientifica ◽  
2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Vidhisha Jassal ◽  
Uma Shanker ◽  
B. S. Kaith
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Degradation ◽  
Organic Dyes ◽  
Degradation Process ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Metal Hexacyanoferrate

Prussian blue analogue potassium metal hexacyanoferrate (KMHCF) nanoparticles Fe4[Fe(CN)6]3(FeHCF), K2Cu3[Fe(CN)6]2(KCuHCF), K2Ni[Fe(CN)6]·3H2O (KNiHCF), and K2Co[Fe(CN)6] (KCoHCF) have been synthesized using plant based biosurfactantAegle marmelos(Bael) and water as a green solvent. It must be emphasized here that no harmful reagent or solvent was used throughout the study. Plant extracts are easily biodegradable and therefore do not cause any harm to the environment. Hence, the proposed method of synthesis of various KMHCF nanoparticles followed a green path. The synthesized nanoparticles were characterized by powder X-ray diffraction (PXRD), Field-Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FT-IR). MHCF nanoparticles were used for the photocatalytic degradation of toxic dyes like Malachite Green (MG), Eriochrome Black T (EBT), Methyl Orange (MO), and Methylene Blue (MB). Under optimized reaction conditions, maximum photocatalytic degradation was achieved in case of KCuHCF nanoparticles mediated degradation process (MG: 96.06%, EBT: 83.03%, MB: 94.72%, and MO: 63.71%) followed by KNiHCF (MG: 95%, EBT: 80.32%, MB: 91.35%, and MO: 59.42%), KCoHCF (MG: 91.45%, EBT: 78.84%, MB: 89.28%, and MO: 58.20%).

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

Ag2O/ZnO Heterostructures with Enhanced Photocatalytic Activity

2021 ◽  
Vol 1035 ◽  
pp. 1043-1049
Author(s):  
Di Xiang ◽  
Chang Long Shao
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Environmental Remediation ◽  
Organic Dyes ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
P Type

A simple route has been developed for the synthesis of Ag2O/ZnO heterostructures and the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and photoluminescence (PL) spectroscopy analysis. Considering the porous structure of Ag2O/ZnO, the photocatalytic degradation for the organic dyes, such as eosin red (ER), methyl orange (MO), methylene blue (MB) and rhodamine B (RhB), under visible light irradiation was investigated in detail. Noticeably, Ag2O/ZnO just took 40 min to degrade 96 % MB. The rate of degradation using the Ag2O/ZnO heterostructures was 2.3 times faster than that of the bare porous ZnO nanospheres under visible light irradiation due to that the recombination of the photogenerated charge was inhibited greatly in the p-type Ag2O and n-type ZnO semiconductor. So the Ag2O/ZnO heterostuctures showed the potential application on environmental remediation.

Hydrothermal Synthesis and Photocatalytic Properties of TiO2/SnS2 Nanocomposite

2014 ◽  
Vol 898 ◽  
pp. 23-26
Author(s):  
Jing Li ◽  
Wei Sun ◽  
Wei Min Dai ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Photocatalytic Property ◽  
Deionized Water ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Chloride Pentahydrate

TiO2/SnS2 nanocomposite was synthesized via hydrothermal treatment of tin (IV) chloride pentahydrate, thioacetamide and TiO2 nanotubes in deionized water at 150 °C for 3 h. The structure, composition and optical property of the as-synthesized nanocomposite were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis diffuse reflectance spectra, and its photocatalytic property was tested in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation. It was observed that TiO2 nanotubes exhibited no photocatalytic activity, whereas TiO2/SnS2 nanocomposite exhibited photocatalytic activity in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation.

scholarly journals Phytogenic Synthesis and Characterization of NiO-ZnO Nanocomposite for the Photodegradation of Brilliant Green and 4-Nitrophenol

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Sirajul Haq ◽  
Aqsa Waheed Raja ◽  
Sadiq Ur Rehman ◽  
Amine Mezni ◽  
Manel Ben Ali ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Brilliant Green ◽  
Band Gap Energy ◽  
Diospyros Kaki ◽  
X Ray Diffraction ◽  
X Ray ◽  
Weight Percentage ◽  
Tauc Plot ◽  
Transmission Electron ◽  
Cell Dimensions

The NiO-ZnO nanocomposite (NiO-ZnO NC) was synthesized by ecofriendly process by using Diospyros kaki (D. kaki) extract of leaves as reducing and capping agents. X-ray diffraction (XRD) was used for examined crystallinity, cell dimensions, and crystallite size (7.6 nm). To determine the purity of sample and weight percentage, energy dispersive X-ray (EDX) is used. The surface morphology was determined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). By using Fourier transform infrared spectroscopy (FTIR), functional groups in samples were determined. By using diffuse reflectance data (DRS), band gap energy calculated via Tauc plot was 3.23 eV. The photocatalytic activity was checked against brilliant green (BG) and 4-nitrophenol (4-NP) and 92.5% and 69.7% of brilliant green (BG) and 4-nitrophenol (4-NP) were degraded with rate of degradation which were 0.0281 and 0.011 min−1.

scholarly journals Synthesis of an optical catalyst for cracking contaminating dyes in the wastewater of factories using indium oxide in nanometer and usage in agriculture

2019 ◽  
Vol 21 (4) ◽  
pp. 98-105 ◽  
Author(s):  
Ishaq F. E. Ahmed ◽  
Ahmed I. El-Shenawy ◽  
Moamen S. Refat
Keyword(s):  
Electron Microscopy ◽  
Indium Oxide ◽  
Organic Dyes ◽  
Low Cost ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
20 Nm

Abstract Herein, the photocatalytic degradation of the Congo Red (CR) and Crystal Violet (CV) dyes in an aqueous solution were discussed in the presence of an indium(III) oxide (In2O3) as optical catalyst efficiency. The caproate bidentate indium(III) precursor complex has been synthesized and well interpreted by elemental analysis, molar conductivity, Fourier transform infrared (FT-IR), UV-Vis, and thermogravimetric (TGA) with its differential thermogravimetric (DTG) studies. The microanalytical and spectroscopic assignments suggested that the associated of mononuclear complex with 1:3 molar ratio (M3+:ligand). Octahedral structure is speculated for this parent complex of the caproate anion, CH3(CH2)4COO− ligand. The In2O3 NPs with nanoscale range within 10–20 nm was synthesized by a simple, low cost and eco-friendly method using indium(III) caproate complex. Indium oxide nanoparticles were formed after calcination of precursor in static air at 600°C for 3 hrs. The structural, grain size, morphological and decolorization efficiency of the synthesized NPs were characterized using the FT-IR, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and transmission electron microscopy (TEM) analyses. It was worthy mentioned that the prepared In2O3 NPs showed a good photodegradation properties against CR and CV organic dyes during 90 min.

Nickel doped Nano Cobalt (II) Oxide used as Photocatalyst for Degradation of Evans Blue Dye

2021 ◽  
Vol 25 (9) ◽  
pp. 71-78
Author(s):  
Nirmal Singh ◽  
Monika Jangid ◽  
Neetu Shorgar ◽  
Paras Tak
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Degradation ◽  
Evans Blue ◽  
Sol Gel ◽  
Blue Dye ◽  
X Ray Diffraction ◽  
X Ray ◽  
Evans Blue Dye ◽  
Transmission Electron ◽  
Working Parameters

The photocatalytic degradation of Evans blue (EB) has been studied under visible light in the presence of nanocrystalline nickel doped cobalt (II) oxide as a photocatalyst. Nickel-cobalt (II) oxide was synthesized by using Sol-gel technique. The photocatalyst was characterized by Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Fourier-transform infrared (FTIR) and High-resolution transmission electron microscopy (HRTEM). Effect of various working parameters like pH, concentration, amount of nickel doped and undoped cobalt (II) oxide, dose of dopants, light intensity etc. on the rate of degradation of Evans blue was also investigated. On the basis of observations, a suitable mechanism for the photocatalytic degradation of Evans blue dye has been proposed.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

The Effect of the Microstructure of Diffusion Barriers on the Palladium Activation for Electroless Copper Deposition

2002 ◽  
Vol 716 ◽  
Author(s):  
Seok Woo Hong ◽  
Yong Sun Lee ◽  
Ki-Chul Park ◽  
Jong-Wan Park
Keyword(s):  
Electron Microscopy ◽  
Diffusion Barriers ◽  
Copper Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Electroless Copper ◽  
Sheet Resistance Measurement ◽  
Scanning Electron

AbstractThe effect of microstructure of dc magnetron sputtered TiN and TaN diffusion barriers on the palladium activation for autocatalytic electroless copper deposition has been investigated by using X-ray diffraction, sheet resistance measurement, field emission scanning electron microscopy (FE-SEM) and plan view transmission electron microscopy (TEM). The density of palladium nuclei on TaN diffusion barrier increases as the grain size of TaN films decreases, which was caused by increasing nitrogen content in TaN films. Plan view TEM results of TiN and TaN diffusiton barriers showed that palladium nuclei formed mainly on the grain boundaries of the diffusion barriers.

Sign in / Sign up

Export Citation Format

Share Document