Transferrin Modified Dioscin Loaded PEGylated Liposomes: Characterization and In Vitro Antitumor Effect

2020 ◽  
Vol 20 (3) ◽  
pp. 1321-1331 ◽  
Author(s):  
Yuanyuan Wang ◽  
Yining Yang ◽  
Yibin Yu ◽  
Jinyu Li ◽  
Weisan Pan ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Laser Scanning Confocal Microscopy ◽  
Average Particle ◽  
Scanning Confocal Microscopy ◽  
Drug Entrapment Efficiency

In this study, a novel transferrin modified liposomal dioscin was prepared by the film dispersion method. The transferrin modified dioscin loaded liposomes (Tf-Lip/Dio) were near-spherical in morphology and had an average particle size of 140.07±1.33 nm, a narrow polydispersity index of <0.2 and a relatively stable zeta potential of -23.7±1.16 mV. The drug entrapment efficiency (EE) and drug loading (DL) of Tf-Lip/Dio were 88.94±1.02% and 4.16±0.05%, respectively. Tf-Lip/Dio exhibited a sustained release characterization of approximately 30% of the total dioscin content after 72 h at 37 °C. Tf-Lip/Dio showed higher cytotoxic efficacy after incubation for 24 h in both HeLa cells and HepG2 cells than in nonmodified liposomes. The enhanced antitumor activity of Tf-Lip/Dio might be due to the increased intracellular uptake, which was corroborated by laser scanning confocal microscopy and flow cytometry. Furthermore, hemolysis experiments preliminarily verified the safety of its intravenous injection. Overall, this study demonstrates Tf-Lip/Dio to be a favorable delivery vehicle for dioscin in future cancer therapy.

Enhanced oral bioavailability of nisoldipine-piperine-loaded poly-lactic-co-glycolic acid nanoparticles

2017 ◽  
Vol 6 (6) ◽  
pp. 517-526 ◽  
Author(s):  
Permender Rathee ◽  
Anjoo Kamboj ◽  
Shabir Sidhu
Keyword(s):  
Oral Bioavailability ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Pharmacokinetic Interaction ◽  
Precipitation Method ◽  
Pharmacokinetic Studies ◽  
Average Particle

AbstractBackground:Piperine helps in the improvement of bioavailability through pharmacokinetic interaction by modulating metabolism when administered with other drugs. Nisoldipine is a substrate for cytochrome P4503A4 enzymes. The study was undertaken to assess the influence of piperine on the pharmacokinetics and pharmacodynamics of nisoldipine nanoparticles in rats.Methods:Optimization studies of nanoparticles were performed using Taguchi L9 orthogonal array, and the nanoparticles were formulated by the precipitation method. The influence of piperine and nanoparticles was evaluated by means of in vivo kinetic and dynamic studies by oral administration in rats.Results:The entrapment efficiency, drug loading, ζ potential, and average particle size of optimized nisoldipine-piperine nanoparticles was 89.77±1.06%, 13.6±0.56%, −26.5 mV, and 132±7.21 nm, respectively. The in vitro release in 0.1 n HCl and 6.8 pH phosphate buffer was 96.9±0.48% and 98.3±0.26%, respectively. Pharmacokinetic studies showed a 4.9-fold increase in oral bioavailability and a >28.376±1.32% reduction in systemic blood pressure by using nanoparticles as compared to control (nisoldipine suspension) in Wistar rats.Conclusion:The results revealed that piperine being an inhibitor of cytochrome P4503A4 enzymes enhanced the bioavailability of nisoldipine by 4.9-fold in nanoparticles.

Formulation and Evaluation of Ketoprofen Using β-Cyclodextrin Capped Silver Nanoparticles

2021 ◽  
Vol 14 (3) ◽  
pp. 5501-5507
Author(s):  
Kiranmai Mandava ◽  
Kruthika Lalit ◽  
Venu Madhav Katla
Keyword(s):  
Particle Size ◽  
Silver Nanoparticles ◽  
Average Particle Size ◽  
Amorphous State ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Average Particle ◽  
Dissolution Studies ◽  
Drug Entrapment Efficiency

The objective of the study was to develop silver nanoparticles loaded with Ketoprofen (Ag-KP) for increasing the drug solubility and thereby its bioavailability. Ag-KP were prepared by the solvent evaporation method using β-Cyclodextrin as a biodegradable polymer. Different formulations of Ag-KP were characterized for the drug entrapment efficiency, Fourier Transform Infrared Spectroscopy (FTIR), particle size analysis, X-ray diffraction studies (XRD), scanning electron microscopy (SEM) and  in-vitro dissolution studies. The optimized formulation (F6) has shown an average particle size of 167.8 ± 3.46 nm,zeta potential of -23.7 ± 1.46 mV. FTIR revealed that the drug showed good excipient compatibility. XRD studies showed that the drug has changed from crystalline to amorphous state. In all formulations, F6 formulation (optimized) exhibited high drug entrapment efficiency (∼93%). SEM studies indicated the shape of Ag-KP was roughly spherical with smooth surface. In vitro dissolution studies showed that Ag-KP from F6 formulation was 94.3 ± 4.9% but for the marketed formulation, it is only 84.6 ± 3.7% in 12 hours and F6 was found to be found stable for three months at both refrigerated and room temperature (RT).

FORMULATION, CHARACTERIZATION AND IN VITRO EVALUTION OF GABAPENTIN FLOATING MICROSPHERES

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (01) ◽  
pp. 20-27
Author(s):  
H. B Samal ◽  
I. J. Das ◽  
P. N. Murthy ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Linear Regression Method ◽  
Average Particle ◽  
Drug Entrapment Efficiency

The present study involves the design and characterization of floating microspheres with gabapentin as model drug for prolongation of gastric residence time. Gabapentin floating microspheres were prepared by o/w/o emulsification solvent diffusion technique using ethyl cellulose as the rate controlling polymer at various concentrations. The shape and surface morphology of microspheres were characterized by optical and scanning electron microscopy. Absence of drug-polymer interaction was confirmed by FTIR analysis. In vitro drug release studies were performed and drug release kinetics was evaluated using the linear regression method. Effects of polymer concentration, solvent composition, particle size, drug entrapment efficiency and drug release were also studied. The synthesized microspheres exhibited prolonged drug release (> 12 h) and remained buoyant for > 24 h. The drug entrapment efficiency was in the range 46-70 %. At higher polymer concentration, the average particle size was increased and the drug release rate decreased. In vitro studies revealed diffusion-controlled drug release from the microspheres. Among all the formulations (F1-F5), F4 is the optimized formulation.

Preparation and Evaluation of Polymeric Microparticles of Human Recombinant IL-1 Receptor Antagonist by Spray Drying

2020 ◽  
Vol 10 (4) ◽  
pp. 308-313
Author(s):  
Anand Ubhe ◽  
Gerard G.M. D’Souza
Keyword(s):  
Particle Size ◽  
Spray Drying ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Average Particle ◽  
Drying Process ◽  
High Drug ◽  
Polymeric Microparticles ◽  
Drug Entrapment Efficiency

Background: Formulating protein drugs into delivery systems with high drug loading is particularly challenging. Another major hurdle for formulation processes generally used for protein drugs is their scalability. In this article, we present the application of spray drying to prepare polymeric microparticles of human recombinant IL-1 receptor antagonist (IL-1 ra). Objective: The objective of this study was to formulate polymeric microparticles entrapping a therapeutic protein, human recombinant IL-1 ra using a spray drying process. Methods: IL-1 ra was formulated using three polymers viz. gelatin, pectin, and sodium alginate by using a spray drying process to produce polymer entrapped drug microparticles. A single drug to polymer ratio was used in the three drug-polymer formulation combinations. The prepared microparticles were evaluated for morphology by scanning electron microscopy, average particle size by dynamic light scattering and drug entrapment efficiency by ELISA. Results: Microparticles of three drug-polymer combinations were prepared using the Buchi B-90 spray dryer. The morphology of the three types of polymeric microparticles was found to be uniform by scanning electron microscopy. The average particle size for the three formulations ranged from 1 to 2.2 μ with a low standard deviation implying narrow particle size distribution. The drug loading efficiency ranged from 62 to 90 % W/W for the three formulations. Conclusion: The presented study demonstrates the feasibility of using spray drying to prepare morphologically uniform polymer entrapped protein drug microparticles with high drug entrapment efficiency.

scholarly journals Preparation of Gefitinib Loaded Polycaprolactone Microcapsule For Controlled Release Drug Delivery System

2017 ◽  
pp. 57-61
Author(s):  
Priyangi Roy ◽  
Purusattam Gartia ◽  
Aritra Nayek ◽  
Asok Kumar Samanta
Keyword(s):  
Controlled Release ◽  
Average Particle Size ◽  
Subcutaneous Administration ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Average Particle ◽  
Drug Entrapment Efficiency ◽  
Drug Polymer Interaction ◽  
Polymer Interaction

The aim of the study was to prepare gefitinib-loaded polycaprolactone microcapsules by simple conventional solvent evaporation method with a view to achieve controlled release of the drug following subcutaneous administration once in a week for targeted therapeutic action especially locally. The microcapsules were prepared using different drug-polymer ratios (1:2, 1:4 and 1:6) and three different stabilizers/surfactants (0.25% w/v, 0.50% w/v and 0.75% w/v) concentrations in aqueous phase. Depending upon the formulation variables, the highest drug entrapment efficiency and the lowest average particle size diameter of the microcapsules were found to be respectively 90.19±2.61 % and 201±3.05 µ. Comparison of Fourier Transform Infra Red spectra of gefitinib, polycaprolactone, their physical mixture and the drug- loaded microcapsules showed the absence of drug -polymer interaction .The in-vitro dissolution study showed that the release of drug from the microcapsules was almost complete on day seventh and the drug release followed Higuchi model.

scholarly journals Formulation and evaluation of guar gum based matrix tableted glibenclamide microspheres

2020 ◽  
Vol 11 (2) ◽  
pp. 2445-2457
Author(s):  
Prashant Singh ◽  
Ritu M. Gilgotra
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Guar Gum ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Matrix Tablets ◽  
Matrix Tablet ◽  
Average Particle ◽  
Drug Entrapment Efficiency

The purpose of this investigation is to establish anti-diabetic activity relationship as well as efficiency of formulated guar gum matrix tablet using microencapsulated glibenclamide (GBLD). This research is an approach to utilize pharmaceutical excipients as an alternative hypoglycemic agent. In order to execute the objective, GBLD microspheres were formulated by emulsion solvent evaporation method using dichloromethane and methanol as solvent system which was transferred drop after drop into encapsulating medium i.e. liquid paraffin light. The formulated microspheres were exposed to various assessment parameters like drug entrapment efficiency, % yield, particle size distribution, and average particle size, the morphology of surface, dissolution study (in vitro) and micromeritics of prepared microspheres. By using these microspheres, matrix tablets were then prepared which were further evaluated for weight variation, thickness, friability, hardness, drug content, stability study, disintegration time, swelling index and dissolution (in vitro) studies were carefully carried out. Betwixt all the formulated microspheres GEM3 was found to best optimized with respect to evaluation parameters. The results obtained were found within the desired ranges where % yield 93.75%, drug entrapment efficiency 95.627% at 12th hour, and the average particle size was observed to be 179.4±0.12 µm. Then, by using the method of direct compression matrix tablets of optimized microspheres GEM3 were prepared and drug release (in vitro) was performed. The obtained results of performed parameters on matrix tableted microspheres were within the acceptable range according to IP guidelines. Out of all formulated matrix tableted microspheres, formulation GMT4 and GMT7 showed an in-vitro % drug release of 95.257 and 94.404 at 12th hour in pH 7.4 phosphate buffer. 

scholarly journals Advanced Static and Dynamic Fluorescence Microscopy Techniques to Investigate Drug Delivery Systems

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 861
Author(s):  
Jacopo Cardellini ◽  
Arianna Balestri ◽  
Costanza Montis ◽  
Debora Berti
Keyword(s):  
Drug Delivery ◽  
Fluorescence Microscopy ◽  
Drug Delivery Systems ◽  
Laser Scanning ◽  
Super Resolution ◽  
Laser Scanning Confocal Microscopy ◽  
Delivery Systems ◽  
Scanning Confocal Microscopy ◽  
Biological Phenomena

In the past decade(s), fluorescence microscopy and laser scanning confocal microscopy (LSCM) have been widely employed to investigate biological and biomimetic systems for pharmaceutical applications, to determine the localization of drugs in tissues or entire organisms or the extent of their cellular uptake (in vitro). However, the diffraction limit of light, which limits the resolution to hundreds of nanometers, has for long time restricted the extent and quality of information and insight achievable through these techniques. The advent of super-resolution microscopic techniques, recognized with the 2014 Nobel prize in Chemistry, revolutionized the field thanks to the possibility to achieve nanometric resolution, i.e., the typical scale length of chemical and biological phenomena. Since then, fluorescence microscopy-related techniques have acquired renewed interest for the scientific community, both from the perspective of instrument/techniques development and from the perspective of the advanced scientific applications. In this contribution we will review the application of these techniques to the field of drug delivery, discussing how the latest advancements of static and dynamic methodologies have tremendously expanded the experimental opportunities for the characterization of drug delivery systems and for the understanding of their behaviour in biologically relevant environments.

scholarly journals Bioassay-guided optimization of lipid-based erythromycin microparticles

2020 ◽  
Vol 19 (7) ◽  
pp. 1351-1358
Author(s):  
Ifeanyi T. Nzekwe ◽  
Anselm C. Okere ◽  
Ifeanyi E. Okoye ◽  
Kokonne E. Ekere ◽  
Adaobi A. Ezenwa ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Antimicrobial Activities ◽  
Hydrodynamic Size ◽  
Chemical Assay ◽  
Acid Ratio ◽  
Drug Entrapment Efficiency ◽  
Lower Variation

Purpose: To optimize erythromycin microparticles by in vitro bioassay methods based on its antibacterial activity. Methods: The microparticles were produced by high shear homogenization. The effects of different lipid-to-surfactant ratios were studied. The hydrodynamic size of the different batches was evaluated using dynamic light scattering while bioactive drug load per batch was assessed in agar using bioassay methods. The antimicrobial activities of selected batches were tested ex vivo by determination of reduction in bacteraemia following administration of the microparticles to infected animals. Results: All batches had particles with hydrodynamic sizes < 8.5 microns. Batch 7 with a 2: 5: 2.5 (drug: surfactant: stearic acid) ratio, represents the optimized batch with a hydrodynamic size of 2281 nm, a bioactive drug loading capacity (BLC) of 4.67 ± 0.70 % and bioactive drug entrapment  efficiency (BEE) of 10.51 %. The “microparticle MIC” against Staphylococcus aureus was 1.74 x 10-3 μg/ml. Despite containing lower amounts of erythromycin than the pure sample, the microparticles achieved comparable reduction in bacteraemia, with the optimized batch exhibiting lower variation in bacteraemia than the pure drug. Conclusion: Erythromycin microparticles have been successfully optimized with the aid of bioassay methods which has the advantage that only the bioactive drug concentration is factored in. This method eliminates problems posed by inadequate or non-discriminating chemical assay methods. Keywords: Microparticles, Erythromycin, Gastrointestinal, Bioavailability Antimicrobial, Bioactivity, Encapsulation

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

scholarly journals Preparation and characterization of domperidone nanoparticles for dissolution improvement

2018 ◽  
Vol 27 (1) ◽  
pp. 39-52
Author(s):  
Mohammed Sabar Al-lami ◽  
Malath H. Oudah ◽  
Firas A. Rahi
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Precipitation Method ◽  
Average Particle ◽  
Antisolvent Precipitation ◽  
Stirring Time

This study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formula was obtained with lowest average particle size of 84.05. This formula was studied for compatibility by FTIR and DSC, surface morphology by FESEM and crystalline state by XRPD. Then domperidone nanoparticles were formulated into a simple capsule dosage form in order to study of the in vitro release of drug from nanoparticles in comparison raw drug and mixture of polymer:drug ratios of 2:1. The release of domperidone from best formula was highly improved with a significant (p? 0.05) increase.

Sign in / Sign up

Export Citation Format

Share Document