scholarly journals The Global Influence of Cloud Optical Thickness on Terrestrial Carbon Uptake

2019 ◽  
Vol 23 (6) ◽  
pp. 1-22 ◽  
Author(s):  
Peiyun Zhu ◽  
Susan J. Cheng ◽  
Zachary Butterfield ◽  
Gretchen Keppel-Aleks ◽  
Allison L. Steiner
Keyword(s):  
Optical Thickness ◽  
Gross Primary Production ◽  
Diffuse Radiation ◽  
Surface Radiation ◽  
Carbon Uptake ◽  
Terrestrial Carbon ◽  
Spatial And Temporal Scales ◽  
Fertilization Effect ◽  
Ecosystem Level ◽  
Cloud Optical Thickness

Abstract Clouds can modify terrestrial productivity by reducing total surface radiation and increasing diffuse radiation, which may be more evenly distributed through plant canopies and increase ecosystem carbon uptake (the “diffuse fertilization effect”). Previous work at ecosystem-level observational towers demonstrated that diffuse photosynthetically active radiation (PAR; 400–700 nm) increases with cloud optical thickness (COT) until a COT of approximately 10, defined here as the “low-COT regime.” To identify whether the low-COT regime also influences carbon uptake on broader spatial and longer temporal time scales, we use global, monthly data to investigate the influence of COT on carbon uptake in three land-cover types: shrublands, forests, and croplands. While there are limitations in global gross primary production (GPP) products, global COT data derived from Moderate Resolution Imaging Spectroradiometer (MODIS) reveal that during the growing season tropical and subtropical regions more frequently experience a monthly low-COT regime (>20% of the time) than other regions of the globe. Contrary to ecosystem-level studies, comparisons of monthly COT with monthly satellite-derived solar-induced chlorophyll fluorescence and modeled GPP indicate that, although carbon uptake generally increases with COT under the low-COT regime, the correlations between COT and carbon uptake are insignificant (p > 0.05) in shrublands, forests, and croplands at regional scales. When scaled globally, vegetated regions under the low-COT regime account for only 4.9% of global mean annual GPP, suggesting that clouds and their diffuse fertilization effect become less significant drivers of terrestrial carbon uptake at broader spatial and temporal scales.

scholarly journals Estimation of cloud optical thickness, single scattering albedo and effective droplet radius using a shortwave radiative closure study in Payerne

2019 ◽  
Author(s):  
Christine Aebi ◽  
Julian Gröbner ◽  
Stelios Kazadzis ◽  
Laurent Vuilleumier ◽  
Antonis Gkikas ◽  
...  
Keyword(s):  
Optical Properties ◽  
Optical Thickness ◽  
Diffuse Radiation ◽  
Single Scattering ◽  
Single Scattering Albedo ◽  
Mean Difference ◽  
Surface Radiation ◽  
Droplet Radius ◽  
Cloud Optical Thickness ◽  
Radiation Measurements

Abstract. We have used a method based on ground-based solar radiation measurements and radiative transfer models (RTM) in order to estimate the following cloud optical properties: cloud optical thickness (COT), cloud single scattering albedo (SSAc) and effective droplet radius (reff). The method is based on the minimisation of the difference between modelled and measured downward shortwave radiation (DSR). The optical properties are estimated for more than 3,000 stratus-altostratus (St-As) and 206 cirrus-cirrostratus (Ci-Cs) measurements during 2013–2017, at the Baseline Surface Radiation Network (BSRN) station in Payerne, Switzerland. The RTM libRadtran is used to simulate the total DSR, as well as its direct and diffuse components. The model inputs of additional atmospheric parameters are either ground- or satellite-based measurements. The cloud cases are identified by the use of an all-sky cloud camera. For the low- to mid-level cloud class St-As, 95 % of the estimated COT values from DSR measurements (COTDSR) are between 11.9 and 91.5 with a geometric mean and standard deviation of 33.81 and 1.67, respectively. The comparison of these COTDSR values with COTBarnard values retrieved from an independent empirical equation, results in a mean difference of −1.20 ± 2.73 and is thus within the method uncertainty. However, there is a larger mean difference of around 18 between COTDSR and COT values derived from MODIS level-2 (L2), Collection 6.1 (C6.1) data (COTMODIS). The estimated reff (from liquid water path (LWP) and COTDSR) for St-As are between 2.1 and 20.4 μm. For the high-level cloud class Ci-Cs, COTDSR is derived considering the direct radiation and 95 % of the values are between 0.32 and 1.40. For Ci-Cs, 95 % of the SSAc values are estimated to be between 0.84 and 0.99 using diffuse radiation measurements. The COT values for Ci-Cs are also estimated from data from precision filter radiometers (PFR) at various wavelengths. The herein presented method could be applied and validated at other stations with direct and diffuse radiation measurements.

scholarly journals Estimation of cloud optical thickness, single scattering albedo and effective droplet radius using a shortwave radiative closure study in Payerne

2020 ◽  
Vol 13 (2) ◽  
pp. 907-923
Author(s):  
Christine Aebi ◽  
Julian Gröbner ◽  
Stelios Kazadzis ◽  
Laurent Vuilleumier ◽  
Antonis Gkikas ◽  
...  
Keyword(s):  
Optical Properties ◽  
Optical Thickness ◽  
Diffuse Radiation ◽  
Single Scattering ◽  
Single Scattering Albedo ◽  
Mean Difference ◽  
Surface Radiation ◽  
Droplet Radius ◽  
Cloud Optical Thickness ◽  
Radiation Measurements

Abstract. We have used a method based on ground-based solar radiation measurements and radiative transfer models (RTMs) in order to estimate the following cloud optical properties: cloud optical thickness (COT), cloud single scattering albedo (SSAc) and effective droplet radius (reff). The method is based on the minimisation of the difference between modelled and measured downward shortwave radiation (DSR). The optical properties are estimated for more than 3000 stratus–altostratus (St–As) and 206 cirrus–cirrostratus (Ci–Cs) measurements during 2013–2017, at the Baseline Surface Radiation Network (BSRN) station in Payerne, Switzerland. The RTM libRadtran is used to simulate the total DSR as well as its direct and diffuse components. The model inputs of additional atmospheric parameters are either ground- or satellite-based measurements. The cloud cases are identified by the use of an all-sky cloud camera. For the low- to mid-level cloud class St–As, 95 % of the estimated cloud optical thickness values using total DSR measurements in combination with a RTM, herein abbreviated as COTDSR, are between 12 and 92 with a geometric mean and standard deviation of 33.8 and 1.7, respectively. The comparison of these COTDSR values with COTBarnard values retrieved from an independent empirical equation results in a mean difference of -1.2±2.7 and is thus within the method uncertainty. However, there is a larger mean difference of around 18 between COTDSR and COT values derived from MODIS level-2 (L2), Collection 6.1 (C6.1) data (COTMODIS). The estimated reff (from liquid water path and COTDSR) for St–As are between 2 and 20 µm. For the high-level cloud class Ci–Cs, COTDSR is derived considering the direct radiation, and 95 % of the COTDSR values are between 0.32 and 1.40. For Ci–Cs, 95 % of the SSAc values are estimated to be between 0.84 and 0.99 using the diffuse radiation. The COT for Ci–Cs is also estimated from data from precision filter radiometers (PFRs) at various wavelengths (COTPFR). The herein presented method could be applied and validated at other stations with direct and diffuse radiation measurements.

scholarly journals Using satellite-derived optical thickness to assess the influence of clouds on terrestrial carbon uptake

2016 ◽  
Vol 121 (7) ◽  
pp. 1747-1761 ◽  
Author(s):  
S. J. Cheng ◽  
A. L. Steiner ◽  
D. Y. Hollinger ◽  
G. Bohrer ◽  
K. J. Nadelhoffer
Keyword(s):  
Optical Thickness ◽  
Carbon Uptake ◽  
Terrestrial Carbon

scholarly journals The response of the Amazon ecosystem to the photosynthetically active radiation fields: integrating impacts of biomass burning aerosol and clouds in the NASA GEOS Earth system model

2021 ◽  
Vol 21 (18) ◽  
pp. 14177-14197
Author(s):  
Huisheng Bian ◽  
Eunjee Lee ◽  
Randal D. Koster ◽  
Donifan Barahona ◽  
Mian Chin ◽  
...  
Keyword(s):  
Primary Production ◽  
Biomass Burning ◽  
Photosynthetically Active Radiation ◽  
Net Primary Production ◽  
Gross Primary Production ◽  
Diffuse Radiation ◽  
Ecosystem Productivity ◽  
Active Radiation ◽  
Fertilization Effect ◽  
The Impact

Abstract. The Amazon experiences fires every year, and the resulting biomass burning aerosols, together with cloud particles, influence the penetration of sunlight through the atmosphere, increasing the ratio of diffuse to direct photosynthetically active radiation (PAR) reaching the vegetation canopy and thereby potentially increasing ecosystem productivity. In this study, we use the NASA Goddard Earth Observing System (GEOS) model with coupled aerosol, cloud, radiation, and ecosystem modules to investigate the impact of Amazon biomass burning aerosols on ecosystem productivity, as well as the role of the Amazon's clouds in tempering this impact. The study focuses on a 7-year period (2010–2016) during which the Amazon experienced a variety of dynamic environments (e.g., La Niña, normal years, and El Niño). The direct radiative impact of biomass burning aerosols on ecosystem productivity – called here the aerosol diffuse radiation fertilization effect – is found to increase Amazonian gross primary production (GPP) by 2.6 % via a 3.8 % increase in diffuse PAR (DFPAR) despite a 5.4 % decrease in direct PAR (DRPAR) on multiyear average during burning seasons. On a monthly basis, this increase in GPP can be as large as 9.9 % (occurring in August 2010). Consequently, the net primary production (NPP) in the Amazon is increased by 1.5 %, or ∼92 Tg C yr−1 – equivalent to ∼37 % of the average carbon lost due to Amazon fires over the 7 years considered. Clouds, however, strongly regulate the effectiveness of the aerosol diffuse radiation fertilization effect. The efficiency of this fertilization effect is the highest in cloud-free conditions and linearly decreases with increasing cloud amount until the cloud fraction reaches ∼0.8, at which point the aerosol-influenced light changes from being a stimulator to an inhibitor of plant growth. Nevertheless, interannual changes in the overall strength of the aerosol diffuse radiation fertilization effect are primarily controlled by the large interannual changes in biomass burning aerosols rather than by changes in cloudiness during the studied period.

scholarly journals Long-Term Changes in Solar Shortwave Irradiance Due to Different Atmospheric Factors According to Measurements and Reconstruction Model in Northern Eurasia

2020 ◽  
Vol 4 (1) ◽  
pp. 5
Author(s):  
Elena Volpert ◽  
Natalia Chubarova
Keyword(s):  
Optical Thickness ◽  
Cloud Amount ◽  
Shortwave Radiation ◽  
Northern Eurasia ◽  
Factors Affecting ◽  
Meteorological Observatory ◽  
Cloud Optical Thickness ◽  
Reconstruction Model ◽  
Good Agreement

The temporal variability of solar shortwave radiation (SSR) has been assessed over northern Eurasia (40°–80° N; 10° W–180° E) by using an SSR reconstruction model since the middle of the 20th century. The reconstruction model estimates the year-to-year SSR variability as a sum of variations in SSR due to changes in aerosol, effective cloud amount and cloud optical thickness, which are the most effective factors affecting SSR. The retrievals of year-to-year SSR variations according to different factors were tested against long-term measurements in the Moscow State University Meteorological Observatory from 1968–2016. The reconstructed changes show a good agreement with measurements with determination factor R2 = 0.8. The analysis of SSR trends since 1979 has detected a significant growth of 2.5% per decade, which may be explained by its increase due to the change in cloud amount (+2.4% per decade) and aerosol optical thickness (+0.4% per decade). The trend due to cloud optical thickness was statistically insignificant. Using the SSR reconstruction model, we obtained the long-term SSR variability due to different factors for the territory of northern Eurasia. The increasing SSR trends have been detected on most sites since 1979. The long-term SSR variability over northern Eurasia is effectively explained by changes in cloud amount and, in addition, by changes in aerosol loading over the polluted regions. The retrievals of the SSR variations showed a good agreement with the changes in global radiance measurements from the World Radiation Data Center (WRDC) archive. The work was supported by RFBR grant number 18-05-00700.

scholarly journals Resolving ice cloud optical thickness biases between CALIOP and MODIS using infrared retrievals

2016 ◽  
Vol 16 (8) ◽  
pp. 5075-5090 ◽  
Author(s):  
Robert E. Holz ◽  
Steven Platnick ◽  
Kerry Meyer ◽  
Mark Vaughan ◽  
Andrew Heidinger ◽  
...  
Keyword(s):  
Optical Thickness ◽  
Spatial Scales ◽  
Radiative Properties ◽  
Radiation Balance ◽  
Data Set ◽  
Mean Values ◽  
Ice Cloud ◽  
Lidar Ratio ◽  
Cloud Optical Thickness ◽  
The Impact

Abstract. Despite its importance as one of the key radiative properties that determines the impact of upper tropospheric clouds on the radiation balance, ice cloud optical thickness (IOT) has proven to be one of the more challenging properties to retrieve from space-based remote sensing measurements. In particular, optically thin upper tropospheric ice clouds (cirrus) have been especially challenging due to their tenuous nature, extensive spatial scales, and complex particle shapes and light-scattering characteristics. The lack of independent validation motivates the investigation presented in this paper, wherein systematic biases between MODIS Collection 5 (C5) and CALIOP Version 3 (V3) unconstrained retrievals of tenuous IOT (< 3) are examined using a month of collocated A-Train observations. An initial comparison revealed a factor of 2 bias between the MODIS and CALIOP IOT retrievals. This bias is investigated using an infrared (IR) radiative closure approach that compares both products with MODIS IR cirrus retrievals developed for this assessment. The analysis finds that both the MODIS C5 and the unconstrained CALIOP V3 retrievals are biased (high and low, respectively) relative to the IR IOT retrievals. Based on this finding, the MODIS and CALIOP algorithms are investigated with the goal of explaining and minimizing the biases relative to the IR. For MODIS we find that the assumed ice single-scattering properties used for the C5 retrievals are not consistent with the mean IR COT distribution. The C5 ice scattering database results in the asymmetry parameter (g) varying as a function of effective radius with mean values that are too large. The MODIS retrievals have been brought into agreement with the IR by adopting a new ice scattering model for Collection 6 (C6) consisting of a modified gamma distribution comprised of a single habit (severely roughened aggregated columns); the C6 ice cloud optical property models have a constant g ≈ 0.75 in the mid-visible spectrum, 5–15 % smaller than C5. For CALIOP, the assumed lidar ratio for unconstrained retrievals is fixed at 25 sr for the V3 data products. This value is found to be inconsistent with the constrained (predominantly nighttime) CALIOP retrievals. An experimental data set was produced using a modified lidar ratio of 32 sr for the unconstrained retrievals (an increase of 28 %), selected to provide consistency with the constrained V3 results. These modifications greatly improve the agreement with the IR and provide consistency between the MODIS and CALIOP products. Based on these results the recently released MODIS C6 optical products use the single-habit distribution given above, while the upcoming CALIOP V4 unconstrained algorithm will use higher lidar ratios for unconstrained retrievals.

scholarly journals Estimating cloud optical thickness and associated surface UV irradiance from SEVIRI by implementing a semi-analytical cloud retrieval algorithm

2012 ◽  
Vol 12 (17) ◽  
pp. 7961-7975 ◽  
Author(s):  
P. Pandey ◽  
K. De Ridder ◽  
D. Gillotay ◽  
N. P. M. van Lipzig
Keyword(s):  
Optical Thickness ◽  
Correlation Coefficients ◽  
Retrieval Algorithm ◽  
Satellite Mission ◽  
Spectral Bands ◽  
Uv Irradiance ◽  
Intercomparison Exercises ◽  
Cloud Optical Thickness ◽  
Mean Square Difference ◽  
Good Agreement

Abstract. In this paper, we describe the implementation of the Semi-Analytical Cloud Retrieval Algorithm (SACURA), to obtain scaled cloud optical thickness (SCOT) from satellite imagery acquired with the SEVIRI instrument and surface UV irradiance levels. In estimation of SCOT particular care is given to the proper specification of the background (i.e. cloud-free) spectral albedo and the retrieval of the cloud water phase from reflectance ratios in SEVIRI's 0.6 μm and 1.6 μm spectral bands. The SACURA scheme is then applied to daytime SEVIRI imagery over Europe, for the month of June 2006, at 15-min time increments. The resulting SCOT fields are compared with values obtained by the CloudSat experimental satellite mission, yielding a negligible bias, correlation coefficients ranging from 0.51 to 0.78, and a root mean square difference of 1 to 2 SCOT increments. These findings compare favourably to results from similar intercomparison exercises reported in the literature. Based on the retrieved SCOT from SEVIRI and radiative transfer modelling approach, simple parameterisations are proposed to estimate the surface UV-A and UV-B irradiance. The validation of the modelled UV-A and UV-B irradiance against the measurements over two Belgian stations, Redu and Ostend, indicate good agreement with the high correlation, index of agreement and low bias. The SCOT fields estimated by implementing SACURA on imagery from geostationary satellite are reliable and its impact on surface UV irradiance levels is well produced.

scholarly journals FAME-C: cloud property retrieval using synergistic AATSR and MERIS observations

2014 ◽  
Vol 7 (11) ◽  
pp. 3873-3890 ◽  
Author(s):  
C. K. Carbajal Henken ◽  
R. Lindstrot ◽  
R. Preusker ◽  
J. Fischer
Keyword(s):  
Optical Thickness ◽  
Single Layer ◽  
Cloud Water ◽  
Effective Radius ◽  
Cloud Property ◽  
Microphysical Properties ◽  
Microphysical Property ◽  
Resolution Imaging ◽  
Cloud Optical Thickness ◽  
Cloud Water Path

Abstract. A newly developed daytime cloud property retrieval algorithm, FAME-C (Freie Universität Berlin AATSR MERIS Cloud), is presented. Synergistic observations from the Advanced Along-Track Scanning Radiometer (AATSR) and the Medium Resolution Imaging Spectrometer (MERIS), both mounted on the polar-orbiting Environmental Satellite (Envisat), are used for cloud screening. For cloudy pixels two main steps are carried out in a sequential form. First, a cloud optical and microphysical property retrieval is performed using an AATSR near-infrared and visible channel. Cloud phase, cloud optical thickness, and effective radius are retrieved, and subsequently cloud water path is computed. Second, two cloud top height products are retrieved based on independent techniques. For cloud top temperature, measurements in the AATSR infrared channels are used, while for cloud top pressure, measurements in the MERIS oxygen-A absorption channel are used. Results from the cloud optical and microphysical property retrieval serve as input for the two cloud top height retrievals. Introduced here are the AATSR and MERIS forward models and auxiliary data needed in FAME-C. Also, the optimal estimation method, which provides uncertainty estimates of the retrieved property on a pixel basis, is presented. Within the frame of the European Space Agency (ESA) Climate Change Initiative (CCI) project, the first global cloud property retrievals have been conducted for the years 2007–2009. For this time period, verification efforts are presented, comparing, for four selected regions around the globe, FAME-C cloud optical and microphysical properties to cloud optical and microphysical properties derived from measurements of the Moderate Resolution Imaging Spectroradiometer (MODIS) on the Terra satellite. The results show a reasonable agreement between the cloud optical and microphysical property retrievals. Biases are generally smallest for marine stratocumulus clouds: −0.28, 0.41 μm and −0.18 g m−2 for cloud optical thickness, effective radius and cloud water path, respectively. This is also true for the root-mean-square deviation. Furthermore, both cloud top height products are compared to cloud top heights derived from ground-based cloud radars located at several Atmospheric Radiation Measurement (ARM) sites. FAME-C mostly shows an underestimation of cloud top heights when compared to radar observations. The lowest bias of −0.3 km is found for AATSR cloud top heights for single-layer clouds, while the highest bias of −3.0 km is found for AATSR cloud top heights for multilayer clouds. Variability is low for MERIS cloud top heights for low-level clouds, and high for MERIS cloud top heights for mid-level and high-level single-layer clouds, as well as for both AATSR and MERIS cloud top heights for multilayer clouds.

scholarly journals Land–atmosphere interactions in the tropics

2019 ◽  
Author(s):  
Pierre Gentine ◽  
Adam Massmann ◽  
Benjamin R. Lintner ◽  
Sayed Hamed Alemohammad ◽  
Rong Fu ◽  
...  
Keyword(s):  
Land Surface ◽  
Deep Convection ◽  
Lower Troposphere ◽  
Surface Fluxes ◽  
Surface Radiation ◽  
Spatial And Temporal Scales ◽  
Wide Range ◽  
Shallow Clouds ◽  
The Tropics ◽  
The Impact

Abstract. The continental tropics play a leading role in the terrestrial water and carbon cycles. Land–atmosphere interactions are integral in the regulation of surface energy, water and carbon fluxes across multiple spatial and temporal scales over tropical continents. We review here some of the important characteristics of tropical continental climates and how land–atmosphere interactions regulate them. Along with a wide range of climates, the tropics manifest a diverse array of land–atmosphere interactions. Broadly speaking, in tropical rainforests, light and energy are typically more limiting than precipitation and water supply for photosynthesis and evapotranspiration; whereas in savanna and semi-arid regions water is the critical regulator of surface fluxes and land–atmosphere interactions. We discuss the impact of the land surface, how it affects shallow clouds and how these clouds can feedback to the surface by modulating surface radiation. Some results from recent research suggest that shallow clouds may be especially critical to land–atmosphere interactions as these regulate the energy budget and moisture transport to the lower troposphere, which in turn affects deep convection. On the other hand, the impact of land surface conditions on deep convection appear to occur over larger, non-local, scales and might be critically affected by transitional regions between the climatologically dry and wet tropics.

scholarly journals Retrieval of cirrus cloud optical thickness and top altitude from geostationary remote sensing

2014 ◽  
Vol 7 (4) ◽  
pp. 4123-4161 ◽  
Author(s):  
S. Kox ◽  
L. Bugliaro ◽  
A. Ostler
Keyword(s):  
Optical Thickness ◽  
High Spectral Resolution ◽  
Orthogonal Polarization ◽  
Cirrus Cloud ◽  
Backpropagation Neural Network ◽  
Novel Approach ◽  
Infrared Imager ◽  
Cloud Optical Thickness ◽  
High Spectral Resolution Lidar ◽  
532 Nm

Abstract. A novel approach for the detection of cirrus clouds and the retrieval of optical thickness and top altitude based on the measurements of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) aboard the geostationary Meteosat Second Generation (MSG) satellite is presented. Trained with 8 000 000 co-incident measurements of the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) aboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission the new "cirrus optical properties derived from CALIOP and SEVIRI algorithm during day and night" (COCS) algorithm utilizes a backpropagation neural network to provide accurate measurements of cirrus optical depth τ at λ =532 nm and top altitude z every 15 min covering almost one third of Earth's atmosphere. The retrieved values are validated with independent measurements of CALIOP and the optical thickness derived by an airborne high spectral resolution lidar.

Sign in / Sign up

Export Citation Format

Share Document