scholarly journals Manual and Semiautomated Wind Direction Editing for Use in the Generation of Synthetic Aperture Radar Wind Speed Imagery

2007 ◽  
Vol 46 (6) ◽  
pp. 776-790 ◽  
Author(s):  
George S. Young ◽  
Todd D. Sikora ◽  
Nathaniel S. Winstead
Keyword(s):  
Wind Speed ◽  
Synthetic Aperture Radar ◽  
Numerical Weather Prediction ◽  
Wind Direction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Synthetic Aperture ◽  
Numerical Weather ◽  
Sar Imagery ◽  
Aperture Radar

Abstract Previous studies have demonstrated that satellite synthetic aperture radar (SAR) can be used as an accurate scatterometer, yielding wind speed fields with subkilometer resolution. This wind speed generation is only possible, however, if a corresponding accurate wind direction field is available. The potential sources of this wind direction information include satellite scatterometers, numerical weather prediction models, and SAR itself through analysis of the spatial patterns caused by boundary layer wind structures. Each of these wind direction sources has shortcomings that can lead to wind speed errors in the SAR-derived field. Manual and semiautomated methods are presented for identifying and correcting numerical weather prediction model wind direction errors. The utility of this approach is demonstrated for a set of cases in which the first-guess wind direction data did not adequately portray the features seen in the SAR imagery. These situations include poorly resolved mesoscale phenomena and misplaced synoptic-scale fronts and cyclones.

scholarly journals Mitigating Atmospheric Effects in InSAR Stacking Based on Ensemble Forecasting with a Numerical Weather Prediction Model

2021 ◽  
Vol 13 (22) ◽  
pp. 4670
Author(s):  
Fangjia Dou ◽  
Xiaolei Lv ◽  
Huiming Chai
Keyword(s):  
Synthetic Aperture Radar ◽  
Numerical Weather Prediction ◽  
Deformation Rate ◽  
Weather Prediction ◽  
Ensemble Forecasting ◽  
Synthetic Aperture ◽  
Tropospheric Delay ◽  
Numerical Weather ◽  
Atmospheric Delay ◽  
Aperture Radar

The interferometric synthetic aperture radar (InSAR) technique is widely utilized to measure ground-surface displacement. One of the main limitations of the measurements is the atmospheric phase delay effects. For satellites with shorter wavelengths, the atmospheric delay mainly consists of the tropospheric delay influenced by temperature, pressure, and water vapor. Tropospheric delay can be calculated using numerical weather prediction (NWP) model at the same moment as synthetic aperture radar (SAR) acquisition. Scientific researchers mainly use ensemble forecasting to produce better forecasts and analyze the uncertainties caused by physic parameterizations. In this study, we simulated the relevant meteorological parameters using the ensemble scheme of the stochastic physic perturbation tendency (SPPT) based on the weather research forecasting (WRF) model, which is one of the most broadly used NWP models. We selected an area in Foshan, Guangdong Province, in the southeast of China, and calculated the corresponding atmospheric delay. InSAR images were computed through data from the Sentinel-1A satellite and mitigated by the ensemble mean of the WRF-SPPT results. The WRF-SPPT method improves the mitigating effect more than WRF simulation without ensemble forecasting. The atmospherically corrected InSAR phases were used in the stacking process to estimate the linear deformation rate in the experimental area. The root mean square errors (RMSE) of the deformation rate without correction, with WRF-only correction, and with WRF-SPPT correction were calculated, indicating that ensemble forecasting can significantly reduce the atmospheric delay in stacking. In addition, the ensemble forecasting based on a combination of initial uncertainties and stochastic physic perturbation tendencies showed better correction performance compared with the ensemble forecasting generated by a set of perturbed initial conditions without considering the model’s uncertainties.

Cross-Polarized Synthetic Aperture Radar: A New Potential Measurement Technique for Hurricanes

2012 ◽  
Vol 93 (4) ◽  
pp. 531-541 ◽  
Author(s):  
Biao Zhang ◽  
William Perrie
Keyword(s):  
Wind Speed ◽  
Synthetic Aperture Radar ◽  
Wind Direction ◽  
Incidence Angle ◽  
Microwave Radiometer ◽  
Synthetic Aperture ◽  
Cross Polarization ◽  
Potential Measurement ◽  
Wind Retrievals ◽  
Aperture Radar

We present an empirical C-band Cross-Polarization Ocean (C-2PO) model for wind retrievals from synthetic aperture radar (SAR) data collected by the RADARSAT-2 satellite. The C-2PO model relates normalized radar cross section (NRCS) in cross polarization to wind speed at 10-m height. This wind retrieval model has the characteristic that it is independent of wind direction and radar incidence angle but is quite linear with respect to wind speed. To evaluate the accuracy of the proposed model, winds with a resolution on the scale of 1 km were retrieved from a dual-polarization SAR image of Hurricane Earl on 2 September 2010, using the C-2PO model and compared with CMOD5.N, the newest available C-band geophysical model function (GMF), and validated with collocated airborne stepped-frequency microwave radiometer measurements and National Data Buoy Center data. Results suggest that for winds up to 38 m s−1, C-2PO has a bias of −0.89 m s−1 and a root-meansquare error of 3.23 m s−1 compared to CMOD5.N, which has a bias of −4.14 m s−1 and an rms difference of 6.24 m s−1. Similar results are obtained from Hurricane Ike, comparing wind retrievals from C-2PO and CMOD5.N with H*Wind data. The advantage of C-2PO over CMOD5.N and other GMFs is that it does not need any external wind direction and radar incidence angle inputs. Moreover, in the presently available quad-polarization dataset, C-2PO has the feature that the cross-polarized NRCS linearly increases even for wind speeds up to 26 m s−1 and reproduces the hurricane eye structure well, thereby providing a potential technique for hurricane observations from space.

High Resolution Wind Fields Retrieved From Spaceborne Synthetic Aperture Radar Images in Comparison to Numerical Models

2002 ◽  
Author(s):  
Jochen Horstmann ◽  
Wolfgang Koch ◽  
Susanne Lehner
Keyword(s):  
High Resolution ◽  
Wind Speed ◽  
Synthetic Aperture Radar ◽  
Wind Direction ◽  
Numerical Models ◽  
Synthetic Aperture ◽  
Wind Fields ◽  
Coastal Regions ◽  
Radar Images ◽  
Aperture Radar

This paper introduces a recently developed algorithm to retrieve high-resolution wind fields over the ocean surface from spaceborne synthetic aperture radar (SAR) data. The algorithm consists of two parts, the first for determining wind direction and the second for wind speed retrieval. Wind directions are extracted from wind induced streaks e.g. from boundary layer rolls, Langmuir cells, or wind shadowing, which are approximately in line with the mean wind direction. Wind speed is derived from the normalized radar cross section (NRCS) and image geometry of the SAR image, together with the local retrieved wind direction. The application of SAR-wind retrieval in coastal regions is demonstrated using data acquired aboard the European satellites ERS-1 and ERS-2 and the Canadian satellite RADARSAT-1. These data allow to measure wind fields of an area of up to 500 km × 500 km with a resolution of up to 200 m. To improve and validate the set-up of numerical high-resolution models in coastal regions SAR-retrieved wind fields offer an unique opportunity. This is shown by comparisons of wind fields measured by SAR to results of the numerical model REMO, HIRLAM and GESIMA.

scholarly journals A Novel Approach to Marine Wind Speed Assessment Using Synthetic Aperture Radar

2006 ◽  
Vol 21 (1) ◽  
pp. 109-115 ◽  
Author(s):  
Todd D. Sikora ◽  
George S. Young ◽  
Nathaniel S. Winstead
Keyword(s):  
Wind Speed ◽  
Synthetic Aperture Radar ◽  
Wind Direction ◽  
A Priori ◽  
Gulf Of Alaska ◽  
Synthetic Aperture ◽  
A Priori Knowledge ◽  
Direction Field ◽  
Aperture Radar ◽  
Priori Knowledge

Abstract This paper describes a product that allows one to assess the lower and upper bounds on synthetic aperture radar (SAR)-based marine wind speed. The SAR-based wind speed fields of the current research are generated using scatterometry techniques and, thus, depend on a priori knowledge of the wind direction field. The assessment product described here consists of a pair of wind speed images bounding the wind speed range consistent with the observed SAR data. The minimum wind speed field is generated by setting the wind direction field to be directly opposite to the radar look direction. The maximum wind speed field is generated by setting the wind direction field to be perpendicular to the radar look direction. Although the assessment product could be generated using any marine SAR scene, it is expected to be most useful in coastal regions where the large concentration of maritime operations requires accurate, high-resolution wind speed data and when uncertainty in the a priori knowledge of the wind direction precludes the generation of accurate SAR-based wind speed fields. The assessment product is demonstrated using a case in the northern Gulf of Alaska where synoptic-scale and mesoscale meteorological events coexist. The corresponding range of possible SAR-based wind speed is large enough to have operational significance to mariners and weather forecasters. It is recommended that the product become available to the public through an appropriate government outlet.

scholarly journals Parametrizing Horizontally-Averaged Wind and Temperature Profiles in the Urban Roughness Sublayer

2019 ◽  
Vol 173 (3) ◽  
pp. 321-348 ◽  
Author(s):  
Natalie E. Theeuwes ◽  
Reinder J. Ronda ◽  
Ian N. Harman ◽  
Andreas Christen ◽  
C. Sue B. Grimmond
Keyword(s):  
Wind Speed ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Roughness Sublayer ◽  
Vertical Profiles ◽  
Flux Boundary Condition ◽  
Numerical Weather ◽  
Urban Roughness Sublayer ◽  
Urban Roughness

Abstract Tower-based measurements from within and above the urban canopy in two cities are used to evaluate several existing approaches that parametrize the vertical profiles of wind speed and temperature within the urban roughness sublayer (RSL). It is shown that current use of Monin–Obukhov similarity theory (MOST) in numerical weather prediction models can be improved upon by using RSL corrections when modelling the vertical profiles of wind speed and friction velocity in the urban RSL using MOST. Using anisotropic building morphological information improves the agreement between observed and parametrized profiles of wind speed and momentum fluxes for selected methods. The largest improvement is found when using dynamically-varying aerodynamic roughness length and displacement height. Adding a RSL correction to MOST, however, does not improve the parametrization of the vertical profiles of temperature and heat fluxes. This is expected since sources and sinks of heat are assumed uniformly distributed through a simple flux boundary condition in all RSL formulations, yet are highly patchy and anisotropic in a real urban context. Our results can be used to inform the choice of surface-layer representations for air quality, dispersion, and numerical weather prediction applications in the urban environment.

scholarly journals Can Reanalysis Products Outperform Mesoscale Numerical Weather Prediction Models in Modeling the Wind Resource in Simple Terrain?

2021 ◽  
Author(s):  
Vincent Pronk ◽  
Nicola Bodini ◽  
Mike Optis ◽  
Julie K. Lundquist ◽  
Patrick Moriarty ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Atmospheric Stability ◽  
Negative Bias ◽  
Numerical Weather ◽  
Wind Resource ◽  
Mesoscale Numerical Weather Prediction

Abstract. Mesoscale numerical weather prediction (NWP) models are generally considered more accurate than reanalysis products in characterizing the wind resource at heights of interest for wind energy, given their finer spatial resolution and more comprehensive physics. However, advancements in the latest ERA-5 reanalysis product motivate an assessment on whether ERA-5 can model wind speeds as well as a state-of-the-art NWP model – the Weather Research and Forecasting (WRF) model. We consider this research question for both simple terrain and offshore applications. Specifically, we compare wind profiles from ERA-5 and the preliminary WRF runs of the Wind Integration National Dataset (WIND) Toolkit Long-term Ensemble Dataset (WTK-LED) to those observed by lidars at site in Oklahoma, United States, and in a U.S. Atlantic offshore wind energy area. We find that ERA-5 shows a significant negative bias (~ −1 m s−1 ) at both locations, with a larger bias at the land-based site. WTK-LED-predicted wind speed profiles show a slight negative bias (~ −0.5 m s−1 ) offshore and a slight positive bias (~ +0.5 m s−1) at the land-based site. Surprisingly, we find that ERA-5 outperforms WTK-LED in terms of the centered root-mean-square error (cRMSE) and correlation coefficient, for both the land-based and offshore cases, in all atmospheric stability conditions. We find that WTK-LED’s higher cRMSE is caused by its tendency to overpredict the amplitude of the wind speed diurnal cycle both onshore and offshore.

scholarly journals Improved Gridded Wind Speed Forecasts by Statistical Postprocessing of Numerical Models with Block Regression

2016 ◽  
Vol 31 (6) ◽  
pp. 1929-1945 ◽  
Author(s):  
Michaël Zamo ◽  
Liliane Bel ◽  
Olivier Mestre ◽  
Joël Stein
Keyword(s):  
Wind Speed ◽  
Random Forests ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Numerical Models ◽  
Weather Prediction ◽  
Forecast Errors ◽  
Near Surface ◽  
Numerical Weather ◽  
Spatial Coverage

Abstract Numerical weather forecast errors are routinely corrected through statistical postprocessing by several national weather services. These statistical postprocessing methods build a regression function called model output statistics (MOS) between observations and forecasts that is based on an archive of past forecasts and associated observations. Because of limited spatial coverage of most near-surface parameter measurements, MOS have been historically produced only at meteorological station locations. Nevertheless, forecasters and forecast users increasingly ask for improved gridded forecasts. The present work aims at building improved hourly wind speed forecasts over the grid of a numerical weather prediction model. First, a new observational analysis, which performs better in terms of statistical scores than those operationally used at Météo-France, is described as gridded pseudo-observations. This analysis, which is obtained by using an interpolation strategy that was selected among other alternative strategies after an intercomparison study conducted internally at Météo-France, is very parsimonious since it requires only two additive components, and it requires little computational resources. Then, several scalar regression methods are built and compared, using the new analysis as the observation. The most efficient MOS is based on random forests trained on blocks of nearby grid points. This method greatly improves forecasts compared with raw output of numerical weather prediction models. Furthermore, building each random forest on blocks and limiting those forests to shallow trees does not impair performance compared with unpruned and pointwise random forests. This alleviates the storage burden of the objects and speeds up operations.

scholarly journals Computational fluid dynamic (CFD) simulation of snowdrift in alpine environments, including a local weather model, for operational avalanche warning

2008 ◽  
Vol 48 ◽  
pp. 150-158 ◽  
Author(s):  
Simon Schneiderbauer ◽  
Thomas Tschachler ◽  
Johann Fischbacher ◽  
Walter Hinterberger ◽  
Peter Fischer
Keyword(s):  
Wind Speed ◽  
Numerical Weather Prediction ◽  
Wind Field ◽  
Snow Depth ◽  
Prediction Models ◽  
Fluid Dynamic ◽  
Weather Prediction ◽  
Time Varying ◽  
Numerical Weather ◽  
Avalanche Warning

AbstractA new continuum approach to snowdrift modelling is introduced. In addition, numerical studies are carried out to identify the influence of time-varying wind conditions on snowdrift simulations. We compare the snowdrift patterns at Grimming mountain, Austria, derived using a time-averaged wind field and a time-varying wind field obtained from the numerical weather prediction model INCA. The results show significant differences in the deposition patterns and snow depth even after a 6 hour drift period. Using time-averaged boundary conditions leads to an underprediction of the resulting snow depth caused by averaging the wind speed, which lets gusts of wind disappear while snow transport is a non-linear function of the wind speed. Using numerical weather prediction models for snowdrift simulation therefore provides enhanced knowledge of the snow depth for local avalanche warning services.

Sign in / Sign up

Export Citation Format

Share Document